Blue screen during windows of note

Similar Questions

• Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

  When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

  I also have this error report for blue screen event.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 1
  BCP1: 85212696
  BCP2: 00000000
  BCP3: 0000FFFE
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini020712-01.dmp
  C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
  C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================================================

  BCCode: 01 0x00000001

  The most common cause of this Bug_Check is drivers then use the methods in the next message
  updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
  with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
  still in force. (See how to update the drivers and run driver verifier in the next message).

  --------------------------------------------------------------------------------------------------------------

  Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

  LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  LeAPC_INDEX_MISMATCHErreur settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The address of the system (system call) function or a worker routine.
  2	The value of the field ApcStateIndex of the current thread.
  3	The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)
  4	Type (system call 0-, 1 - routine worker) of the call.

  Cause

  The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

  BCCode: 01 0x00000001<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

  ====================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• Blue screen. Windows does not start. Even on Safe Mode!

  When I turned on my laptop the windows logo and everything is in place. But then comes the black screen and ask the options to start windows normally, start in safe mode, ect. I chose to start normally, then a blue screen appears which says that the computer has shut down to prevent damage. He said that I had to disable all anitivirus and other things that I don't have to read. I tried every other selection as start in safe mode, start in safe mode with command prompt, in the other options, I get the same blue screen. I really need to get this problem fixed. I have no CD of installition XP, I have no CD of restoration, I have nothing to work with, so I just need to know a way around it.

  There is no magical way around that without any installation disc. Most laptops come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

  These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25.

  Before you try to restore the computer, you must determine if the material is good. You can test yourself:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  A good troubleshooting step is to start with a Linux Live CD. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.

  If the equipment is faulty, if you replace it or not depends of which component is bad and the age of the machine.

  If the material is good (maybe Windows has been severely infected with a virus/malware and that's why he no longer starts for example), then perform a restore if you plant using any method has been provided by the computer laptop mftr.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).
  MS - MVP - Elephant Boy computers - don't panic!

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• FLTMGR. SYS blue screen during Windows XP repair

  So my secondary computer has had problems starting lately. And when he did start, it was only a matter of time before it would BSOD on a machine_check_exception. In the last two days that there so bad he has finished start up at all. So I found the XP installation CD and booted from that and tried to make the repair facility. Everything seems to be okay and he said that the computer will restart and Setup will continue. He gets to the Windows XP loading splash screen, but quickly then I get BSOD with

  STOP: 0X0000007E (0XC0000005, 0XF73E92B2, 0XF79C6490, 0XF79C6190)
  FLTMGR. SYS - address F73E92B2 base at F73D1000, DateStamp 480251da

  When I try to reboot from the CD, he wants to start the installation process

  and when I try to restart in safe mode, I get a message that says: "Windows XP Setup cannot run in safe mode. The installation program will restart now. »

  Hello

  I was going through discussions and saw that it had not received a response.

  Let's start by running chkdsk from the recovery console.

  Instructions on the entry for the recovery console is located at the following link:

  http://support.Microsoft.com/kb/314058

  While we are at the command prompt, type the following command followed by the Enter key:

  CHKDSK C:/p

  Allow to run chkdsk, and note that it can take some time.

  Try to restart it in normal mode when chkdsk is finished.

  Best regards

  Matthew_Ha

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• Please help - Virus? Can not enable automatic updates and blue screens during the virus scan

  Hi, I think I might have a virus.  Here are the symptoms:

  • I can't activate the automatic updates
  • MS Security Essentials blue-screens in an analysis complete (I can do a quick scan)
  • I was able to run a quick scan of the Scanner for MS without problem.
  • When you open Internet Explorer I always get "stopped unexpectedly" and it gives me a choice to go to the previous page or home page
  • I have AVG Antivirus but it was blue-screening during a scan, so I uninstalled and installed MS Security Essentials
  • I ran a chkdsk /r and no errors not found on my hard drive

  I searched the internet and I tried a few suggestions, but so far I have not made progress.

  I am running XP SP3 and I don't remember disabling the automatic updates.

  I am open to any suggestions, just some guidelines at this stage.

  Hello

  ·         What exactly happens when you try to activate the automatic update?

  ·         You receive no error message from error code?

  I suggest to reset the Windows Update components and check if the problem persists. Visit the following link and click on Fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261

   

  Note: The article also applies to Windows XP service pack 3.

  Let us know if it helps.

• my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

  whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

  Hi leonardhurley,

  Since when are you facing this problem?

  You did changes before this problem occurs?

  What is the exact blue screen error message you received?

  Method 1

  I suggest that you perform the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

  Method 3:

  I suggest you to follow the article below for the Blue error screen.

  http://support.Microsoft.com/kb/958233/en-us

• HP PRO 3405 series MT * blue screen during installation *.

  Hello

  I tried to install Windows XP on this PC, but I get the blue screen during the installation. Instead, with windows 8 I can install.

  I need drive for controller? (F6 at startup)

  Hello:

  See if these drivers work.

  You will need a USB floppy drive to install on the line of F6. A USB flash drive does not work.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4169006 & prodNameId = 4169007 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-74977-1

  Now you have to extract the real drivers, you must copy and paste to your floppy drive.

  Download the free 7-zip file and use it to extract the files in the exe file you downloaded above.

  http://7-zip.org/download.html

  After having extracted the file, you will find the drivers in the folder of the driver.

  Open this folder and copy and paste the drivers inside this folder on your floppy drive.

  If this does not work, go into the BIOS and change sata from AHCI to IDE emulation and install windows like that.

  Then try to manually install the driver sata ahci by a manual update of the drive controller in Device Manager.

  If you install, you restart and back emulation sata AHCI in the BIOS, so the hard drive works better it will be in IDE mode.

• crash blue screen of Windows 8

  I've updated to windows 8.1 and realized that the games run slowly on it. Then I updated my software drivers so I spent again to windows 8. But when I did that my laptop started to crash at a random moment when I was playing a full screengame or watch a vid on youtube full screen it hangs and said if you want more search information for driver iqrl not less or equal.

  I would apreiciate if someone wants to help me.

  -Devil

  Hello

  Thanks for posting your question in the Microsoft Community.

  The DRIVER_IRQL_NOT_LESS_OR_EQUAL error usually occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  • Did you just install a new program or a piece of hardware, update a driver, install an update, etc. ?

  • You get the error message? Please provide the exact error message / error code.

  I suggest you try using the methods below and check if it can help solve the problem.

  Method 1: Run the Safe Mode and perform a clean boot

  Step 1: Safe Mode. Safe mode is a troubleshooting mode that starts Windows with a minimal set of drivers and services. Start your operating system in this way and see if the problem appears.

  Start the computer in safe mode with network and check if the problem persists. Follow these steps to start the computer in safe mode.

  Click on the link and follow the steps in Start parameters of Windows (including safe mode)

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135  

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  If the problem persists I suggest you follow method 2

  Method 2:

  Resolution of errors blue screen in Windows

  Reference: http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  IMPORTANT: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Also check your installed programs. If you see something that you have not installed and is not part of Windows, use the Remove Programs option.

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• Blue screen of Windows 8 with various errors

  I want to HP dv6 provided with Microsoft 8 on it (it's only a year today)

  The problems that I encountered:

  -L' computer would freeze with a screen colorful weird pixelated

  -L' computer freezes while attending a bsod (you could tell because the screen would be the light blue color, but would not have error codes or restart)

  -L' computer would go to a bsod with an almost different error code every time (sometimes I couldn't write before it will re-start)

  -system_thread_exception_not_handled (dxgmml.sys) or (dxgkrnl.sys)

  -"KMODE_EXCEPTION_NOT_HANDLED"

  -page_fault_in_nonpaged_area (ntfs.sys) (it's the one I see most often)

  -memory_management

  -IRQL_not_less_or_equal

  -kernel_security_check_failure

  -driver_overrun_stack_buffer

  All these problems have occurred during various tasks, never the same as the one

  - And now I can't even on the computer because as soon as I turn it on it tries to auto repair, but fails. It then takes me to the boot menu where I tried all options, without success.

  I don't have any sort of installation dvd or windows dvd backup.

  I do not know what I did to make this crazy computer, but please help me to make happy again because I have no money against hepatitis a for professional help not to mention a new computer.

  OT: Computer Hp Windows 8 / I don't know what the problem is or how to fix it.

  Hello

  Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  I suggest you try the steps from the following link:

  Resolution of errors blue screen in Windows
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Also check if there are errors listed in Event Viewer.

  Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.

  To open the journals please follow the steps.

  Press the Windows key + W
  Type 'view event logs"on the splash screen and press enter.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.