Blue screen error STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164)
Original title: blue, impossible to restart screen
System: Dell Dimension 3000, Windows XP Home - SP3.
Problem: I recently installed the new memory (now has 2G), check that the memory has been recognized and work. Computer worked fine for several hours, with a noticiable improvement. Then received warning from McAfee "A Trojan had been identified" and the computer had to be stopped to fix. Not sure if this was related to the new memory, but the moment was just a few hours apart. When I tried to restart the computer - I got a blue screen of death with the following technical information: * STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164). I can't start the computer in safe, except the Mode modes safe mode with command prompt and to my level of skills making me much good. Please notify. Thank you.
Hi mysticskier,.
Follow these methods.
Method 1: Disconnect all external devices such as printer, scanner, etc.
Method 2: Follow the steps in the article.
You may receive a Stop error on a blue screen when you start a Microsoft Windows Server 2003-based computer or a Microsoft Windows XP-based computer
http://support.Microsoft.com/kb/893239
You receive a random "0x0000008E" error message on a blue screen in Windows XP
http://support.Microsoft.com/kb/827663
Tags: Windows
Similar Questions
-
Hi, I turn on my laptop with windows Vista Home Basic (Compaq) and I get a blue screen with this error:
STOP: 0X0000007E (0XC0000005, 0X824EC033, 0X88F03650, 0X88F0334C)
I tried with safe mode and all the options that windows and compaq gives, but everybody works, do you know what I can do? I want only the files in the hard drive, there is a solution?
Thank you
I used a Windows XP Live CD to backup my files, clean the data and reinstall Windows Vista... because I can't correct the mistake x_X
Thank you anyway ^^ -
How to fix blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)
These accidents were caused by the corruption of memory (probably a driver). Run these two tests to check your memory and find which driver is causing the problem.
If you are overclocking reset all default before running these tests.
In other words STOP!1 - Memtest.
* Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool
* Boot from the CD and let it run at least 5 or 6 passes.
Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
Test the sticks individually and if you find a good, test it in all slots.
Any error is indicative of a memory problem.
If a well-known stick fails in a slot of motherboard, it's probably the slot.
http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html
2. Driver Verifier
Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.
So, here is the procedure:
-Go to start and type "auditor" (without the quotes) and press enter
-Select 'Create a custom settings (for code developers)' and click 'Next '.
-Select "Select individual settings from the list complete" and click "Next".
-Select the entire document except for "Low resource Simulation" and click "next".
-Select "Select driver names from a list", then click "next".
Select all drivers that are NOT provided by Microsoft, and then click "Next".
-On the next page, select "Finish".Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).
If you are unable to Windows because it crashes too early, try safe mode.
If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.htmlFurther reading
"http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced -
I tried F8 into safe mode and do anything (mode), I put it in, always comes back to the blue screen... Help, please...
Hey ninatc,
Here is an article from the Microsoft Knowledge Base that speaks of STOP error message 0x0000007E.
Follow the suggestions in the article to resolve the problem.
How to troubleshoot a Stop error 0x0000007E in Windows XP
http://support.Microsoft.com/kb/330182Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
"blue screen error" stop 0x0000003e "appeare
"blue screen error" stop 0x0000003e "appeare
Bug Check 0x3E: MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
This indicates that the system has multiple processors, but they are asymmetric in relation to the other.
Cause
To be symmetric, all processors must be of the same type and level. This system contains processors of different types
You use different processors on your system of MP.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I get this error since the 22 and I ran across the typical procedures already (clean the temporary files and updates to the bios, etc.).
I still keep getting a blue screen error page saying "0x0000007E (0 x 0000005, 0x806E794F, 0xF7A45C30.). 0xF7A4592c).The minidump files show a SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) coherent don't stop error.with no third-party driver named as causing the crash.
Here is a "Summary" of the accident:
BUCKET_ID: 0x7E_nt! FsRtlRemovePerStreamContext+ 1
Here's the "Stack_Text" which refers to the fltmgr.sys:
STACK_TEXT:
f7a4dcf4 804ed978 85fdba28 85e185cc 85fdba20 hal! ExAcquireFastMutex + 0xf
f7a4dd08 f7458b6c e2fa9b30 85e18370 e2fa9b30 nt! FsRtlRemovePerStreamContext + 0x1e
f7a4dd34 f745a0ba 85e18370 86873be8 85e254c8 fltmgr! FltpDeleteAllStreamListCtrls + 0 x 62
f7a4dd50 f744c8f7 85e183f4 86873be8 00000008 fltmgr! FltpFreeVolume + 0xa4
f7a4dd68 f745064e 85e254c8 00000008 8056485c fltmgr! FltpCleanupDeviceObject + 0x61
f7a4dd7c 805387cb 86873be8 86dc2b30 00000000 fltmgr! FltpFastIoDetachDeviceWorker + 0x14
f7a4ddac 805cffa8 86873be8 00000000 00000000 nt! ExpWorkerThread + 0xef
f7a4dddc 8054615e 805386dc 00000000 00000001 nt! PspSystemThreadStartup + 0 x 34
00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x16It is very similar to the error reported in the following link where "Drive Letter Access" seems to be the issue.
http://Forum.sysinternals.com/BSOD-7E-Driver-Verifier-problems_topic18148_page1.html
Since you also have Sonic Drive Letter Access installed you can try to uninstall this software and see if the problem resolves.
-
Blue screen error STOP: 0x0000000A
STOP: 0x0000000A irql not less or equal bvluescreen 1055 whats up?
What's new?
Hello
See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top two responses.==============================================
References to Vista also apply to Windows 7.
just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
The video driver or something affecting it would be questionable.At the end of this message, I'll post a bluescreen generic and in the next convenience store
How do to update the drivers and BIOS but also to check memory message.-----------------------------------
BCCode: 0a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool
- Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.
Comments
Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.
BCCode: 0a 0x0000000A<-- read="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-==================================================================
General troubleshooting BlueScreen to use with the methods above.
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
blue screen error stop 0 x 00000019
When my friend starts windows 7 on his computer after the signature she gets a blue screen and the codes only that I'm able to catch during the dump process are 0 x 00000019 before restarting the computer, this computer is ony around the age of 2 months, anyone know or have any ideas as to why this is happening?
Hello
On a new computer it should certainly contact support from the manufacturer of the system for known issues and
claim of possible guarantee as well as their forums (if any). It's to fix more they
pretend that it is something that the user did as the cause.====================================
If you want to solve the problem.
This is most likely caused by a stray driver, although the antivirus/antispyware/security programs and
memory/hardware are all the real suspects. See my update driver and memory by following test methods
Message.BCCode: 19 0 x 00000019<-- read="">-->
http://www.faultwire.com/solutions-fatal_error/bad-pool-header-0x00000019-* 1040.html? = date order===========================================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista (also Windows 7) Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Help to fix the blue screen error: STOP: 0x0000007A
Original title: I get the BSOD on my Dell Inspiron 14 stop information is at the bottom. What means this dose-specific code and how can I solve this problem?
STOP: 0x0000007A (0xFFFFFFFFC0000056, 0x0000000058DB3860, 0xFFFFF8A000E42A48, 0xFFFFF960001E082C) he begins again each time after it happens like nothing ever happened, but I don't want my computer any crash if there is an easy way to understand what it means and set it would be nice.
Hello
Here are some of the more general methods that could help solve the problems of use as
necessary (same as in the link below).Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlHow to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I get a blue screen that reads (a problem has been detected and Windows has shut down to prevent damage to your computer) last night my computer started poping up saying windows my computer is infected every 2 minutes, it even changed my image of the desktop, I went and deleted the Windows defender thought it was the sorce , DID I SREW UP?
Hello
You probably have one of these fake antivirus programs that affect your system. Can you tell us what the
program who gave the alert was or if it was you heading? When you receive warnings, you might be
infected by is not a good idea to delete legitimate programs that help protect your computer.First makes sure you are clean if we don't need to know the answers to the foregoing.
It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Mr President, I have a problem on my desktop hp 1 week
When I run Microsft security essential after some time a blue screen happen to my monitor with the following notification:
PAGE_FAULT_IN_NONPAGED_AREA
STOP: 0 X 00000050 (0XA83B2000, 0X00000000, 0X00000001, 0X80537DEC).
______________________________________________________________________________
It happens after when I run microsoft security essential other time its ok...
Help, please
my pc configuration is
Compaq HP SR13300IL
Microsft windows professional sp3
Pentium 4 cpu 2.93 ghz 0.99 GB of RAM
& have 320 disc segate hard
Hello anurydhkuksal.
I had the chance to look over the landfills.
It seems that the culprit in this one was HFSYS. SYS.
This is part of an older program called Hide Folders.
I recommend you to uninstall this program.
Here is the debug information. My comments are in bold:
The mini kernel dump file: only registers and the trace of the stack are available
Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) PUTS free x 86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
By: 2600.xpsp_sp3_gdr.101209 - 1647
Computer name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805540c0
The debugging session: 11:24:19.718 Sun 9 Oct 2011 (UTC - 05:00)
System Uptime: 0 days 0:19:08.286
Loading the kernel symbols
.........
Cannot load the image HFSYS. SYS, 0n2 error Win32
WARNING: Unable to verify timestamp for HFSYS. SYS
ERROR: Module load completed but symbols can not be loaded for HFSYS. SYS
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck 10000050, {a7fb7000, 1, 80537 dec, 0}
Could not read the name of the problem driver
Probably caused by: HFSYS. SYS (HFSYS + 1796)<-- debugger="" blames="">-->Follow-up: MachineOwner
---------KD >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
It must be protected by a probe. In general, the address is simple bad or it
pointing to freed memory.
Arguments:
Arg1: a7fb7000, memory referenced.
Arg2: 00000001, value 0 = read operation, 1 = write operation.
Arg3: dec 80537, if not zero, the address of the instruction that refers to bad memory
address.
Arg4: 00000000, (reserved)Debugging information:
------------------Could not read the name of the problem driver
WRITE_ADDRESS: a7fb7000
FAULTING_IP:
NT! wcsncpy + 33
80537 dec f3ab rep OSTC dword ptr are: [edi]MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 8
DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT
BUGCHECK_STR: 0 X 50
Nom_processus: MsMpEng.exe
LAST_CONTROL_TRANSFER: from aa327796 to 80537 dec
STACK_TEXT:
a7fb628c aa327796 a7fb62ac85D 29008 00fe0003 nt! wcsncpy + 0 x 33
00000000 00000000 00000000 a7fb67fc
00000000 HFSYS + 0 X 1796<-- only="" 3rd="" party="" driver="" the ="">-->
STACK_COMMAND: kb
FOLLOWUP_IP:
HFSYS + 1796
aa327796? ???SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: HFSYS + 1796
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: HFSYS
NOM_IMAGE: HFSYS. SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 3dbbd77d
FAILURE_BUCKET_ID: 0x50_HFSYS + 1796
BUCKET_ID: 0x50_HFSYS + 1796
Follow-up: MachineOwner
---------KD >! thread
GetPointerFromAddress: unable to read from 80558ad4
WIRE 85e759f8 Teb 0ba4.0728 Cid: 7ff8b000 Win32Thread: 00000000 PROCESSOR 0
The IRP list:
85D 29008: (0006, 01fc) flags: 00000800 Mdl: 00000000<-- can't="" read="" irp="" in="">-->
Borrow not identity
GetUlongFromAddress: cannot read 80558b6c
Owner of process 0 Image:
Joint process 85 c 42020 Image: MsMpEng.exe
ffdf0000: cannot get shared data
Wait start TickCount 73490
County 24427 context switch
ReadMemory error: could not get nt! KeMaximumIncrement value.
Get_user_time 00:00:00.000
KernelTime 00:00:00.000
0x7c910250 Win32 start address
Start 0x7c8106f9 address
Stack Init a7fb7000 current a7fb67c4 a7fb7000 limit a7fb4000 Base dial 0
Priority 8 BasePriority 8 PriorityDecrement 0 DecrementCount 16
ChildEBP RetAddr Args to child
a7fb628c aa327796 a7fb62ac 85D 29008 00fe0003 nt! wcsncpy + 0 x 33 (FPO: [Non - Fpo])
WARNING: Information not available stack unwind. Sequence of images may be wrong.
a7fb67fc 00000000 00000000 00000000 00000000 HFSYS + 0 x 1796
KD > lmvm HFSYS<-- loaded="" module="" verbose="">-->
start end module name
aa326000 aa329da0 HFSYS T (no symbol)
Loaded symbol image file: HFSYS. SYS
Image path: HFSYS. SYS
Image name: HFSYS. SYS
Timestamp: Sun Sep 27 07:09:33 2002 (3DBBD77D)<-- driver="" is="" about="" 9="" years="">-->==========================================
==========================================
Let us know if you have any questions about it.
Best regards
Matthew_Ha
-
Original title: STOP: 0x000000F4 (0 x 00000003, 0x89B44CB8, 0x89B44E2C, 0 x 80605666).
System becomes error blue screen as follows (STOP: 0x000000F4(0x00000003,0x89B44CB8,0x89B44E2C,0x80605666).)
Hi brahim khacer,.
1. have you made any hardware changes or software on the computer before this problem?
2. when exactly you receive this error code?
If you have similar scenarios as mentioned in the 916199 KB, you can contact Microsoft Customer Service & provide article kb 916199 to obtain the fix.
Reference: connect a drive in slave only led to the shutdown of the system during recovery from sleep modeHope the helps of information.
Please post back and we do know. -
blue screen error: stop 0x0000007B...
Please can someone help me with this technical problem in my computer. STOP: 0x0000007B (0xF78E9524, 0xC0000034, 0x00000000, 0x00000000). This information shows whenever I open my computer and I can't open it. I, ve tried safe mode, but even he ends with the blue screen with text and technical information is above. Any help will be appreciated ba please. Thank you very much.
Basically the error means that the installation of Windows has lost access to the controller driver.
If it is a newer computer with SATA drives go into BIOS and check the SATA settings, place the controller in IDE mode and see if the computer starts correctly.
John
-
Original title: Windows has shut down to not to damage the computer
When I go to install windows, it gets a blue screen with this error:
STOP: 0X0000007B (0XF78D2, 524, 0XC0000034, 0X00000000, 0X00000000)Hello
See the article below that could be useful.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
http://support.Microsoft.com/kb/324103 -
so I used Spybot S & D to get rid of a virus on my computer that I thought was spyware. (basically what made the virus was redirect all my research on google for websites ad). After what's happened, he said I had to reboot my computer so I don't, Spybot run and then asked me a bunch of changes and whether to 'allow' or 'ignore' or 'refuse the change. I don't know if this has caused, but I clicked on 'allow' or 'deny change' for many of them, and then neither firefox nor IE would work because both would be would break whenever I tried to use them.
so to remedy THIS problem, I tried to use "System Restore" last week when my laptop was working fine, but the system restore everything screwed up my worst computer. Now XP will not boot even upward, and I get a blue screen with the error "STOP: 0x00000007E (0 x 0000005, 0 xC0000001, 0xF7AA13D4, 0xF7AA1D0) ' and its a cycle with no end of restarting but XP never works.
I tried the safe mode, last good configuration, all these options, known and none got XP to start.
I am so lost on what to do, can anyone help me?
Thanks for all your comments
rdjfdhar,
Thanks for posting on the Microsoft answers Forum. If you can try to boot mode safe mode with command prompt, and then run the following commands.Chkdsk /r
http://support.Microsoft.com/kb/315265
sfc/scannow
http://support.Microsoft.com/kb/310747
If you cannot start mode safe mode with command prompt, then you need to boot from your XP CD recovery console and run these commands. Post back with the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
The change event is not firing when it is linked to a text entry field in 15 FF
$("#dealer-warranty-parts-percent").bind ('change', function() {}data.partsPercent = $(this) .val ();AMMS.dealerWarrantyModified = 1;}); This code will not trigger in the last (15 FF) version of FF, but fires in the previous version. I feel now move
-
DVD - Rom SD-M1712 is able to burn discs double layer?
Hi, I have a pc compaq, with toshiba dvd players. DVD - rom SD-M1712. I have windows xp. I was doing a holiday film that is too big to go on a 4.7 GB dvd + r disc (which I have done before) so I thought that I had nothing better to do that to buy a l
-
Satellite C50-A-15 q - arrow, question mark key and key z do not work
I have a Satellite Pro, C50-A-15 q. All the keys worked fine yesterday, today I turn on the laptop, and arrow keys, point of interrogation and the z key are all unresponsive. No idea how can I fix? I tried to turn the laptop on, in hopes (naively) th
-
What's new in updated BIOS v2.20 for Qosmio G40
Hello Nobody updates its G40 to v2.20 BIOS? You know what's new in this version? Thank you.
-
Windows crashes software when it cannot verify the Publisher * found the problem
* Found the problem, thank you anyway I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls. I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.