Blue screen in the portable 3rd in a row. Help?

Similar Questions

• (P50) Blue screen during the BIOS update

  Hello

  I'm trying to update to the latest version of the BIOS, http://support.lenovo.com/se/sv/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50...

  (Lenovo ThinkPad P50, (20-0007MS), Windows Enterprise 10, 64 - bit, build 10586, suspended BitLocker.

  But when the update starts and it comes to read current Bios, the laptop gives me just a blue screen and the error:

  
  Your PC rann in a problem and must restart.
  We are just collection that some info of the error, and then we will restart for you (xx % complete)

  If you want to learn more, you can search online later to this error:

  System_service_exception (TdkLib64.sys)

  A google search gives no results.

  Comment to Moderator: Fixed URL.

  Nice day.

  I'm sorry that I can't help with the problem you are experiencing using updater .exe.

  If ensure you that you need the update, you can try the boot disk method: http://support.lenovo.com/us/en/downloads/ds106109

  I hope this helps a little.

  Kind regards.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen at the end of Windows Update

  I have Windows updates the value allowing a manual download and install.  Today, when the icon appeared, there were 8 suggested files.  I downloaded and the window open during the installation Setup.  Approximately 98% of the 8th and last update (Malicious Software Removal Tool if they are installed in the order), I got a blue screen.  The machine starts, but the Update icon reappeared, asking to perform the same 8 updates.  I know that most of them have already been installed.  I really hesitate to install again, especially as others have reported may not even start at all their machines after this batch of updates.  What should I do?

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  The following actions could prevent a mistake like this does not happen:

  1 download and install updates for your computer from device drivers [of the manufacturer of the device or computer software download page, not Windows Update!]
  2. scan your computer from computer viruses.
  3. check your hard disk for errors.

  Source & more: http://msdn.microsoft.com/en-us/library/ff559023(v=vs.85).aspx

• reformat and reinstall Windows XP but get the blue screen on the windows configuration page

  I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer.  How can I make this?  I want to give this computer to my grandchildren.

  Hello

  1. why you try to reinstall Windows XP?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

  a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

  b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.

  c. do not choose the option to press R to use the Recovery Console.

  d. in the Windows XP licensing agreement, press F8 to accept the license agreement.

  e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

  f. follow the instructions on the screen to complete the installation.

  See the following link for more details on the repair facility:

  How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

  http://support.Microsoft.com/kb/978788

  Hope this information is useful.

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Blue screen during the installation of windows

  I was formatting my laptop, when the new windows (windows xp) is installed and during his stops starting and give a blue screen with the error, and automatically restart and the same breed bluse screen and restart. I tried to open the safe mode, but its revealing windows is not completely installed please pick up again. I tried four times back again with the same problem. Please help me...

  Hi AhmadDimassi,

  ·         What is the error it fails with?

  Check to see if the following is useful.

  Method 1: Unplug non-essential devices from the computer and restart the computer.

  Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

  Method 3: Check drive for errors.

  Description of the Windows XP Recovery Console for advanced users

  Microsoft Windows XP - Chkdsk

• whenever I try to install windows xp I have blue screen with the following error: 0x0000007e

  Original title: blue screen

  Hello

  I have format my laptop and now whenever I try to install windows xp, I get a blue screen with the following text
  error: 0x0000007e (0 x 0000005, 0x808c4de1, 0xf78da150, 0xf78d9e4c).
  I try everything, I remove the memory modules RAM, resetting the bios, etc, nothing works.
  can someone help me?
  Laptop is a toshiba L20-153
  Thanks Joakim

  Hello

  These error messages may be due to hardware problem.

  The methods of troubleshooting provided in the below article might help you.
  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• Blue screen with the error "irql_not_less_or_equal"

  I have a problem I can not correct and hoped someone could help me fix.

  I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I got another blue screen with the error "irql_not_less_or_equal" So now, I have only access in safe mode.

  I tried to restore the system to a previous point, but the same error occurred during windows startup.

  Then I made a backup of my files and tried to use the disk to reboot, but again, I got a blue screen (I don't remember the excact error) after the first loading bar, so noting changed.

  Then I looked at the log files and found that, just before the first crash, an adobe update has been installed. I removed adobe list startup failed, completely remove the adobe doesn't either.

  Also, in safe mode I don't have an internet connection (without wire or cable). Blue screen errors is not always the same, esspesially codes "stop".

  My knowledge of windows is very bad, so I just tried things people recommended on internet. If someone could help me would be great. I deleted all my important files from my laptop so I don't mind lossing just as long as windows functiones correctly again.

  Thank you

  King

  Sorry, but there are way too many mistakes even describe.  You have about 5000 errors of Avast.  I would like to delete it

  

• I tried to connect wifi with my laptop, including wireless I use for a month now, but shows only 2 blue screens without the world down on the right, and he said "unidentified network".

  "Unidentified network".

  Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanks

  Go to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.

  Do not put a check in the box: remove the software driver for this device.

  Restart your computer and Windows will install your wireless network.

  If the problem persists, see if your computer manufacturer has an updated driver.

  These articles may help:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://support.Microsoft.com/kb/313242

• Get the blue screen and the computer shuts down.

  Suddenly, I got blue screen and the computer will stop. File that describe the problem

  c:\Windows\Minidump\Mini020611-01.dmp

  Anyone know the cause of the problem? Any security breach?

  Hello

  Security is not usually a problem with a BSOD but it can be. Are you running effective
  antivirus/antispyware/security programs?

  ------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">