Blue screen just after the update from Microsoft.

Similar Questions

• Local only access immediately after the updates from Microsoft installed.

  I have a Dell 531 s running Windows Vista Home Basic Edition.  It has been working fine for years with a USB wireless adapter.  The other night I left it on and Microsoft installed some updates and restarted my computer for me.  Since then, I can't get my router LOCAL ONLY access.  I can't access the router or do something that is no longer communicates properly with him.  I looked and I tried to uninstall IASATP 3 equipment, put it back and restart.  Still only ACCESS LOCALLY on this computer, so that all other devices Wi-wired and the same mental health of router to function normally.  Any suggestions?

  Hello

  -Who were the updates installed on your computer before this problem?
   
  Method 1: I suggest you to see link below and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  For reference:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
  Method 2:
  Follow the steps mentioned below and check if the problem persists.
  (a) enter in the network and sharing Center.
  (b) right click on the Network icon and select view status of.
  (c) click on Properties.
  (d) click on Configure , then select the driver tab.
  (e) click update the driver.
  
  For reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information helps.

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• Loss of FN - key after the installation of the updates from Microsoft on L500 security

  I am using a satellite L500-19U

  After the installation of Microsoft security updates the FN lost their function except the brightness keys + /-function.
  also the function keys that appear on the upper border of monitor by pressing the FN key appear after the security packages have been installed.
  I solved the problem by removing the update through the function of W7 (Wiederherstellungs punkt) back.

  The following security packages are selected to be installed:
  Update security for Windows 7 for x 64-based systems (KB978601)
  Update security for Windows 7 for x 64-based systems (KB979309)
  Update security for Windows 7 for x 64-based systems (KB979683)
  Update security for Windows 7 for x 64-based systems (KB980232)
  Update security for Windows 7 for x 64-based systems (KB981332)
  Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool)

  Which of them are unsuspicios, which must be postponed, the updates are necessary after installation, updates?

  Post edited by: JoJo58

  Hello

  If you read about these update on the Microsoft website: (not of them should affect the FN keys)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=998164b7-4B8C-468B-8d39-f242633c8838

  I checked the history of updates on my computer and all of them are installed with the exception of Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool). Everything works correctly, try to remove this update.

• Cannot restart the computer after downloading updates from Microsoft

  I downloaded updates from microsofts and the next step was to who I checked ok restart.
  The computer turns off and then tried to start, but stops and the error of reading a disk error has occurred.
  Press Ctrl-Alt-Del to restart. It does not work. Cannot enter safe mode or use my cd XP pro disk. Need some help here.
  Is it possible to start this computer from my laptop? My laptop using vista altimate. I can be reached at my e-mail address * address email is removed from the privacy *.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  They will help you in the above discussion group.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Cannot send messages just after the update on Nov.18

  I have no details. It happened just after the Thunderbird updated automatically from the internet on Nov.18 (Fri) JST. After writing an e-mail, press send below, the softeare confirming the address and receiver, then is NOTHING PAST. Just to return to the window of e-mail must be sent.

  I suspect you updatd to 45.5.0?

  Could be caused by lightning. Look at the tools | addons | Look for the updates.

  Please tell us, is the latest version?

  If that fails, what happens if you run Thunderbird in safe mode?

• Change the path to the updates from microsoft updates vs. windows

  Fully updated, xp pro, ie8

  When you click Start, all programs, windows update, go to the updates of microsoft with the compatibility view

  which connection online for microsoft updates gets updates microsoft without compatibility view

  can I change the path for my start, all programs, windows updates to be updated from microsoft without view compatibiliy?

  Edit: have reinstalled os with a sp3 slipstreamed cd.

  Edit2: no sites are not listed in my compatibility view settings.

  There is no need to uninstall/reinstall MSE.

  1. open IE (only!) to Microsoft Update . Click change settings in the left pane. Scroll to the bottom of the page. To stop using Microsoft Update. Disable the Microsoft Update software and let me use Windows Update only (check).

  1B. Reboot for good measure.

  2. your shortcut on the start menu should now be updated to Windows . [1] use it (not the Tools menu pull-down option) to go to http://update.microsoft.com/windowsupdate. Assuming that it does NOT open in compatibility mode...

  3. "Flip" your source of default update appropriate Microsoft update by clicking on the option / link on the main page of Windows Update (IIRC).

  3B. reboot for good measure & test to see if the Microsoft Update shortcut on your Start menu will however open IE8 in compatibility view.

  PS: I don't have a WinXP box handy to test myself, but the last time I used the Microsoft Update shortcut on one of my client computers, it has not opened in compatibility view. As far as I know, MS may have changed something since then so YMMV.

  =============================================================
  [1] If you persevere with Windows Update as a source of update by default, MSE will always be 'auto-update' [even thought that Windows Update will offer more optional updates Defs] but will offer no updates to the ESM (e.g. new versions MSE) program or updates for MS Office, Silverlight, or Skype .

• Blue screen of death after running the update from microsoft.

  Stop: 0x0000007e (0xFFFFF800010305C3, 0xFFFFFADEC2E08150, 0xFFFFFFFFC00000005, 0xFFFFFADEC2E07B60)
  It is the only information I get the blue screen. It is a new workstation 7500 Dell with Windows 7, downgraded to Win XP Pro (because of the requirements of software). I have two more 7500 workstations that are exactly as this one do not experience this problem. I was pulled to microsoft update and expressed option, begun to load all the necessary updated (27) and one failed. The Net.Framework 1 after install, I was asked to reboot. When it came, it stopped support windows with the blue screen. This system is as follows:

  Dell Precision T7500 workstation

  1 CPU X 5570 Quad Core 317-0277 2.93GHz,8M,6.4GT/s,Dell Precision T7500

  1 317 - 0333 12 GB DDR3 SDRAM ECC 3x4Go, 1066 MHz, Dell Precision TX500

  1-320-7900 dual 1 GB PCIe x 16 NVIDIA Quadro FX 3800, Quad-Monitor, DVI + 2DP, Dell Precision TX500

  1 341-9040 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-8835 C25, all SAS, RAID 10 hard drives for 4 hard drives, Dell Precision T7500

  1-468-4322 Windows 7 Pro 64-bit Downgrade to XP Pro 64 - bit SP2, media, English, fixed precision

  1 421-1993 Windows 7 Downgrade RLOB

  1 430-3434 PCIe 10/100/1000 NETWORK CARD precision

  1-313-7458 data DVD 16 x - ROM only Dell Precision TX500

  1 421-0536 Cyberlink Power DVD 8.3, with the media, Dell relationship LOB

  1 313-7774 Dell AX210 two piece stereo speakers (black) to the precision of the Optiplex and Latitude

  1 power supply 330-3555 Precision T7500

  1 330-3156 documentation, English, Dell Precision

  1 power cord 330-3157, 125V, 2 M, C13, Dell Precision

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-9032 PERC6 / i SAS/SATA hardware RAIDCard - for the connection of InternalHard readers, Dell Precision T7500

  1-330-3571 Resource DVD contains Diagnostics and drivers for Dell Precision T7500

  1 shipping material of 330-3569 for system Dell Precision T7500

  1 410-1862 adobe Acrobat 9.0 English and French, BND, precision Dell OptiPlex and Latitude

  1 420-6712 Microsoft Office Professional for Latitude, OptiPlex, Precision

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  Thanks Swahti. My resolution is to return the manufacturer since it's brand new and make an Exchange.

• Computer screen problem after you download the update from Microsoft Windows

  My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.

  Later, I noticed the screen problem. Can someone help me please on this issue?

  Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?

• Cannot restart after optional updates from Microsoft. Down arrows don't work when in the loop boot selection page

  Went to Microsoft Update and downloaded and installed a few optional upgrades, including one about a driver. After installation, will not restart. Arrive at the page Windows XP will then black screen and then the boot selection list. Is "glued" to the normal startup and arrows don't work for go mode without failure or any other option. He just times down, try to reboot and loop. Help!

  Hello

  Have updates you installed?

  You can check the KB number for the update in the update history:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 1: Unplug the power cable, the keyboard and mouse and then reconnect it back. Now, check if you're able to boot in safe mode (by using the arrow keys) or normal mode. Send back the same.

  Step 2: Alternatively, you can restore the system from the recovery console.

  Reference:
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Blue screen, even after the installation of updates

  Hello

  I get blue screens several times a day. I took a screenshot

  

  I tried Googling "IRQL_NOT_LESS_THAN_OR_EQUAL_TO" as well as the error "0x0000000a" Looks like a driver is not installed correctly? System log is below:

  

  These blue screens started happening after that windows told me to install the updates. I also tried restoring the system to a previous point, but I kept getting popups to update drivers for windows. The Minidump files are also located here: http://www.filedropper.com/072315-37268-01

  My system information are less than

  

  Two questions

  1 - McAfee will kill network driver

  2 associated with NETw1v64.sys Wireless WiFi Link Drive of Intel Corporation

  I would like to delete McAfee and re - install the driver wifi

  Read all about the update of drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  

• The screen started after the update of the Sierra

  A few seconds after the awakening of my MacBook Pro, some large highly colorful randomly-shaped defects appear on several parts of the screen. Any suggestions?

  Hi buckeye351,

  I understand that you see some video distorted on the screen of your Mac just after that you wake up from its sleep. Which is certainly not normal behavior. I would like to make a few suggestions to help.

  As a first step, I recommend your Mac NVRAM reset. Take a look at this resource that goes on how to reset the NVRAM:

  How to reset the NVRAM on your Mac - Apple Support

  If you continue to experience this problem, check out this site to see if your Macbook Pro with the Retina display model corresponds to one of the models in question:
  Graphic problems - Support Apple MacBook Pro repair Extension program

  Take care!

• Failure of the update from Microsoft

  I have Win - XP Prof. with Service Pack 3 installed.

  In Microsoft Update, after download, the installation of "Office 2003 update for Microsoft Office Outlook 2003 Junk e-mail filter (KB2466074)" fails with error Code: 0x51F. What could be the reason?

  There are 5 other updates that fail to install.

  Hello

  I suggest you follow the steps mentioned in the articles below.

  You receive an "Installation error: file not found" or "Error 0x51F" error message when you try to update Office 2003 programs from the Office Update Web site or the Office Download Center

  http://support.Microsoft.com/kb/875556

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Blue screen error after xp update today

  Hello
  My laptop has been updated today with xp and now it won't restart. I get an error on a blue screen with the error number * Stop: 0x0000007E. I can't boot into SafeMode either. I read in some of the other forums

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1

  You can fix it if you have the windows installation CD, unfortunately my laptop came with it pre-installed so I have no CD. Does anyone know where I can get one, or if this problem can be solved without it. I don't really want to have money for costly repairs shell that was not my fault!

  I tried microsoft e-mail and ringtone but have not received any answer yet :(

  See the RESPONSE (by Kevin Hau) message in the thread referenced: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1 
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot download the update from microsoft > update security for windows media encoding for windows xp and windows server 2003 kb2447961

  I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.

  Hello
  
  1. don't you encounter any error message during the installation of this update?
  2 is this problem limited to this particular update?
   
  I ask to download the update manually and then install it.
  Here is the download link:
  A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
  http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.