Blue screen Memory Dump error - Windows 7 Professional 64 bit

Similar Questions

• Windows 7 blue screen memory dump

  My computer laptop windows 7 has just started gives me an error dump BSOD and memory.  It happened 2 x 5/29 & 6/5.  Only thing I can think of that has been done is installed Photo shop Elements 9 29/5.  Both times I got the blue screen I was using IE.  It appears if fast and not a memory dump, and then restarts, so I don't have the error code?  Is someone can you please help me solve this new problem.  I tried to read some of the previous ones, but did not quite understand exactly what I have to do to get someone to look at my logs to solve this problem.

  The minidump files showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) stop error caused by the KmxAMRT.sys:

  BUCKET_ID: X64_0xD1_KmxAMRT+ 10748

  The KmxAMRT.sys, which is dated October 27, 2011, is a driver of CA Antivirus.

  What I would say is to uninstall Antivirus CA and see if the blue screen errors to fix.

  After have REINSTALL CA anti-virus using the most recent version or go with other security such as Microsoft Security Essentials software.

• Blue screen common problems with Windows 7 Professional

  Hello

  My laptop that runs Windows 7 Professional has been crashing with a blue screen and restarts itself several times in the recent past. I have some information on two recent falls that occurred during the 6 days (yesterday and today). I think I was the first remote desktopping (last Wednesday) and has been streaming video on the internet with an Antivirus scan running in the background the second time (today). I guess that the accidents were caused due to high loads as I was running some heavy programs both times. I enclose a copy the details of the problem for the two events below.

  Last occurrence (today):

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: f4
  BCP1: 0000000000000003
  BCP2: FFFFFA8007C166F0
  BCP3: FFFFFA8007C169D0
  BCP4: FFFFF80002FCB7C0
  OS version: 6_1_7601
  Service Pack: 1_0

  Product: 256_1

  Previous (last Wednesday) occurrence:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 7A

  BCP1: FFFFF6FC50020F30

  BCP2: FFFFFFFFC00000C0

  BCP3: 0000000045F0A880

  BCP4: FFFFF8A0041E6000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  I had a few temporary files and minidump both the times mentioned in the details of the problem. Please let me know what is the cause frequently these problems and how to solve them.

  I would also like to know if these blue screen crashes affect the functionality of my laptop or files/data stored in it. Thanks in advance for your help.

  Thanks and greetings

  MOULEE Pascaud

  I would update your drivers of Juniper, theyre 6-7 years. I don't think that they are windows files

  NETwNs64.sys your Intel wireless drivers are in 6 years. I'd like to update

  Intel® Management Engine Interface is also 6 years

  Your Intel video drivers are also old - 3 years

• After the upgrade and 'restart', with the first step, vista hangs in blue screen. memory dump. then restart windows, continues with the upgrade installation.

  This is the update installed.

  Update type: Important

   

  A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

   

  More information:

  http://go.Microsoft.com/fwlink/?LinkId=179062

   

  Help and Support:

  http://support.Microsoft.com

   

   

  It's crash results.

   

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6002.2.2.0.256.6

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               d1

  BCP1:                                                    00000001

  BCP2:                                                    00000002

  BCP3:                                                    00000000

  BCP4:                                                    8056662A

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini021710-01.dmp

  C:\Users\Robert B Benson\AppData\Local\Temp\WER-778569-0.sysdata.xml

  C:\Users\Robert B Benson\AppData\Local\Temp\WER147.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Some time after the closing of applications and stop, at startup, the system "says" there was an "unexpected", even if stop at the previous stop, 'things' seem close, hault and close.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Blue screen on startup without windows error message 8

  Hello

  My computer toshiba satellite, only 2 months, shows a blue screen with no error message when starting upwards. Windows 8. I searched google for an answer and everything that I can find is: 1) remove the battery. 2) press F8. (3) remove the battery, connect the power cable, press and hold the power button for 15 seconds. None of these fixes worked. After holding the power button for 15 seconds the word Toshiba appears, as it tries to start, but only stays on for about 2 seconds then goes to blue screen again.
  Very frustrated with windows 8! Have had problems with him from the first day! Help, please!
  Sandi

  Hello

  To help you, we will need files DMP to analyze what exactly happened at the time of the accident, etc.

  If you don't know where the DMP files, here's how to get to them:

  1. go to the folder % systemroot%\Minidump.
  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
  3 download the zip containing the files DMP to Skydrive or a Web hosting of your choice and paste in your answer.

  If you plan to use Skydrive, but do not know how to download it, please see the following:

  http://www.WikiHow.com/use-SkyDrive

  Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove DMP files after use.

  If your computer doesn't generate DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. check that the viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

• my windows laptop 8 is not start blue screen with an error message

  I have a laptop of Acer windows 8 that won't start - it has one blue screen with an error message and other options that work. I do not have a windows 8 dvd or any other device installation and I cannot restart my factory because I have files that are not backed up so they cannot be deleted. Can someone please?

  Thank you for Madi responded and sorry to see that the issue still persists. I appreciate your efforts to try to resolve the problem.

  Since we tried all possible solutions and you do not have a disc of Windows 8. You must contact the manufacturer of the computer. They will be able to participate in the repair of Windows.

  http://us.Acer.com/AC/en/us/content/support

  If you have problems with Windows in the future, get back to us. We will be happy to help you.

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equal

  When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equ

  . DMP files ar bellow:

  https://onedrive.live.com/?CID=BF931C2E054B2BA5&ID=BF931C2E054B2BA5%21105

  Original title: driver_irql_not_less_or_equal

  Accidents were not conclusive.

  BugCheck D1, {29, 2, 0, fffff880018b9f2a}

  Probably caused by: ndis.sys (ndis! ndisXlateReturnNetBufferListToPacket + 2 a).

  Follow-up: MachineOwner

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 0000000000000029, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
  Arg4: fffff880018b9f2a, address memory

  Debugging information:

  Update your network drivers, preferably from the support page of the manufacturer of your computer, which is strangely not available at this time. If you can't find a version update at Dell, try Realtek, linked below

  Identification information of the machine [of Smbios 2.3, DMIVersion 35, size = 2590]
  BiosVendor = Dell Inc.
  BiosVersion = A11
  BiosReleaseDate = 30/11/2006
  SystemManufacturer = Dell Inc.
  SystemProductName = OptiPlex GX520
  BaseBoardManufacturer = Dell Inc.
  BaseBoardProduct =
  BaseBoardVersion =

  OptiPlex GX520

  http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-GX520/drivers

  Note: This machine is pretty old and I see no driver support beyond Windows XP.

  Image path: \SystemRoot\system32\DRIVERS\Rtnic64.sys
  Image name: Rtnic64.sys
  Timestamp: Fri 30 mai 11:12: 23 2008 (48401957)

  Description of the driver: Realtek Ethernet NIC driver

  Driver update site: http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=10&level=3&Conn=2

• Blue screen crash. Error DRIVER_IRQL_NOT_LESS_EQUAL

  Good evening!

  I recently updated my Windows OS 8.1 and after that my pc has started getting a blue screen with an error DRIVER_IRQL_NOT_LESS_EQUAL (igdkmd64.sys). After going through 2 hours of update and reboot it started randomly blue screen of my PC. Especially after a game. Can it be caused be video card (most likely because the accident happens after a game) because it was not updated to the latest version?

  Best wishes!

  Hello

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  ========================================================

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1.
  
  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  BCCode: D1 0x000000D1

  Think video drivers especially if it may be others. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
  antispyway/antivirus/security programs can also cause this.

  ---------------------------------------------------------------------------------------------------------

  BCCode: D1 0x000000D1

  Control 0xD1 bug: DRIVER_IRQL_NOT_LESS_OR_EQUAL

  The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug control has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  DRIVER_IRQL_NOT_LESS_OR_EQUAL parameters

  The following settings are displayed on the blue screen.

  
  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).

  • The function call was made to a function in another pilot, and that this driver has been unloaded.

  • The function was called by using a function pointer that was an invalid pointer.

  Resolution

  To begin debugging, use a kernel debugger to get a stack trace.

  If the problem is caused by the driver that you develop, make sure that the function that was running at the time bug is not marked as pageable or does not call for all other inline functions that could be paged out.

  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  low level chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen during installation of Windows XP on HP touchsmart 7320

  I have a HP touchsmart 7320 with Windows 7 Professional 64-bit pre-installed.

  I have to install Windows XP (32 bit) next to Windows 7, so that I can run a costly professional application which meets the incompatibility issues with Windows 7.

  Compatibility mode makes no difference. Virtual PC and XP mode are broken during the installation of the application. So its a way for me to have a dual-boot with Windows 7 ande Windows XP machine.

  When I am installing Windows XP (all versions-family, professional, 32 or 64-bit with original CD always) gives a blue screen with strange characters and the following STOP message:

  | STOP 0X0000007E
  
  (0xc0000005, 0xf748e0bf, 0xf78da208, 0xf78d9f08)
  
  PCI.sys - address f748e0bf base at f7487000 datestamp 36d855c

  I did a new Windows XP installation CD using nLite, "slipstreaming" of Service Pack 2 and AHCI SATA drivers I found here and they are proposed by this guide.

  That seems to work for awhile, because the installation process went further. It passes the point where she was already giving the blue screen, but it gives blue screen in a later stage of the installation process and one other STOP message which is now:

  Hello:

  I have another solution for you.

  First, go to your Windows 7 installation and in Device Manager, click on IDE ATA/ATAPI controllers section.

  Please confirm that you have the Intel (r) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.

  If it's not the ACHI SATA controller you have, thanks for posting what you have.

  Now, here is another method to install XP.

  Go into your BIOS. Go to the menu of storage options. Change your SATA of ACHI to IDE emulation mode. Save the configuration at this time by pressing the F10 key and save your settings again when you leave.

  Now XP must install.

  After XP is installed, please share back and I'll give you the instructions step by step to load the post SATA ACHI driver XP installation, so you can change your return to ACHI BIOS setting, so that you can dual boot your machine.

  Currently, only XP will start with the value IDE BIOS. With the ACHI BIOS value, only W7 will start. That's why we need to load the drivers for XP achi sata once you have it installed.

  I think that we can find all the XP drivers, you need to as well.

  Paul

• Satellite C660 shows blue screen (memory management)

  I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.

  There suddenly restart with blue screen (memory management).

  > I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.
  Why wait so long? You may contact Toshiba service whenever you want and ask for help, or at least for the good advice.

  Have you tried to do something about it?
  Clean installation of recovery maybe? Have you noticed this error when the laptop works with the factory settings?

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Blue screen with an error: process1_initialization_failed "stop: 0x0000006B (0xC0000020, 0 x 00000003, 0x00000000, 0x00000000).

  OT: Boot to Vista.

  Hello everyone,

  I have a laptop running Vista which is not booting to windows at all. I tried repair disk installation which stops at a blue screen with an error: process1_initialization_failed

  Lowest:

  Stop: 0x0000006B (0xC0000020, 0 x 00000003, 0x00000000, 0x00000000)

  Y at - there anyone who can help?

  Thanks in advance :)

  Hi Nikita,

  Try the following link that will help solve your problem:

  You receive "0x0000006B" and "0XC000021A" Stop error message after you uninstall McAfee Agent 4.6.2 in Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2:

  I hope this helps. Please let us know if you need assistance.

• Blue screen with the error "irql_not_less_or_equal"

  I have a problem I can not correct and hoped someone could help me fix.

  I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I got another blue screen with the error "irql_not_less_or_equal" So now, I have only access in safe mode.

  I tried to restore the system to a previous point, but the same error occurred during windows startup.

  Then I made a backup of my files and tried to use the disk to reboot, but again, I got a blue screen (I don't remember the excact error) after the first loading bar, so noting changed.

  Then I looked at the log files and found that, just before the first crash, an adobe update has been installed. I removed adobe list startup failed, completely remove the adobe doesn't either.

  Also, in safe mode I don't have an internet connection (without wire or cable). Blue screen errors is not always the same, esspesially codes "stop".

  My knowledge of windows is very bad, so I just tried things people recommended on internet. If someone could help me would be great. I deleted all my important files from my laptop so I don't mind lossing just as long as windows functiones correctly again.

  Thank you

  King

  Sorry, but there are way too many mistakes even describe.  You have about 5000 errors of Avast.  I would like to delete it