Blue screen of death after the update installed at startup upward.

I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

Stop: c000007b {bad image}

The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

Install the updates one at a time or 5 at the time may not be a bad idea. Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

You said you DO or DO NOT have to System Mechanic configured to run at startup? Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat. If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

The Dell has a number of service tag sticker and if so what does it say? You can search for things by service number

You should make a bootable CD of XP (no XP media required) Recovery Console.

You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

Here's how:

If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

This is not the same as recovery disks that might have come with the acquisition of the system store.

You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

The ISO bootable image file you need to download is called:

xp_rec_con. ISO

Download the ISO from here:

http://www.mediafire.com/?ueyyzfymmig

Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

http://www.ImgBurn.com/

When you install ImgBurn, DO NOT install the Ask toolbar.

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.

When you start on the CD, follow the instructions:

Press any key to boot from CD...

Installing Windows... going to pronounce.

Press 'R' to enter the Recovery Console.

Select the installation that you want to access (usually 1: C:\WINDOWS)

You may be asked to enter the password (usually empty).

You should be in the folder C:\WINDOWS. It's the same as the

C:\Windows folder that you see in Solution Explorer.

The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

Tags: Windows

Similar Questions

Blue Screen of Death After Windows Update

I was out of the House one night and while outside, my cell phone went through a routine Windows Update and restarted (what he did specifically I'm not aware of). Unfortunately, when I came back, I met a blue screen of death. I tried a system repair and restoration of the system, and none of them worked. I'm typing this from my wife's computer as we speak. I am very anxious, and I would like to use my laptop again. If anyone can help, please reply as soon as possible.

Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

MS - MVP - Elephant Boy computers - don't panic!

HP Pavilion ze4900: blue screen of death after trying to install Windows on Pavilion ze4900?

After the death of my hard drive in my Pavilion ze4900, I replaced it with another hard drive for laptop, I had laying around.

I also tried to install Windows XP Home from a Windows installation CD, the same OS, the laptop had before the hard drive died.

Everything is going well until the laptop has been made all the installation files, instead of giving me the opportunity to install Windows or repair Windows, the laptop will eventually show me a blue screen with the message:

"A problem has been detected and windows has shut down to prevent damage to your computer.

What can I do to fix this? I installed Windows XP on another computer using the same CD, so the CD disappeared not corrupted and replacing the hard drive is hardly used.

Any help would be greatly appreciated!

@zenvo2015,

Hello and thanks for the display on the HP support forums. The first thing you want to check is if there are any problems with the hard drive that you put in. Run BIOS diagnostics for the drive and the equipment to make sure that there is no problem.

Laptops HP - diagnostic system (F2)

And.

HP Notebook PC - test a hard drive from BIOS

Please let me know how things are going.

Thanks again for posting and have a great day.

Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"

Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter

Hi all

I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)

A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:

STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)

AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801

I couldn't find anyone with the same problems. Can you help me?

Thanks in advance,

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

We prefer at least 2 DMP files to track trends and to confirm the cause.

Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

If you have any questions regarding the procedure, please ask

Qosmio F20 blue screen of death after stop

Hello

I get the blue screen of death after a stop on my laptop Qosmio F20.

The error is IRQ_NOT_LESS_OR_EQUAL.

I guess that's somehow connected to the tv tuner card.

I tried to restore the system - not good. After the restoration for some time, it was OK. But then again appeared BSOD.

Sometimes, it also appears when I connect USB hard drives or even when I insert the DVD disc.
And for shure every time I stop to laptop.

Anyone have any ideas?

Hello

This is my personal opinion;
I think it's a memory problem!

Why, because it of very difficult to reproduce this error message and it looks like this BSOD happens without the use of hardware or special software

I have gogoled for this error message and I had a lot of success!
I read in various forums on this issue, and especially a fault memory has been one reason why the BSOD appeared.

But someone suggested to disabled the pagefile... Probably, you should check out these tips:
http://joelmama.com/2006/10/16/Windows-XP-BSOD-error-IRQ_NOT_LESS_OR_EQUAL/

Good luck

We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

Then do a repair installation.

http://www.michaelstevenstech.com/XPrepairinstall.htm

If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

Hello

If you think the update caused the blue screen then uninstall it to check.

Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

Or

Remove an update
http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

Or

The problems with the removal of updates
http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
Or

How to uninstall updates in Windows Vista
http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

Disable or hide optional updates on Windows Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

==============================================================

If not, remove the updates help then we can troubleshoot the BlueScreens.

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

-------------------------------------------------------------------------

Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html

===========================================================

Check out these utilities to see if information may be collected:

It is an excellent tool for displaying the blue screen error information

-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html

-------------

MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html

------------

AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html

I hope this helps.

Qosmio G25: blue screen of death in the course of watching TV

I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

Does anyone else have this problem?

Kind regards
Stephen

Hello

AFAIK the Qosmio G25 was designed for the American market.
All laptops that end in 5 are for the U.S. market.
However, it is not easy to say why it happens.
I assume you are using the image of Toshiba's own operating system.
I checked the driver Toshiba U.S. page and found a few drivers.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

You can check that you have installed driver TV tuner driver and BIOS versions.
Maybe a BIOS update will help you.

But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

Blue screen issue started after the warranty more

Hi I bought a HP laptop and exactly after the warranty period, there is a problem.

And provided HP customer support a lot of drivers to install but not working.

Seems that if we extended the guarantee we will get the right driver to install.

My previous laptop was HP, so I got another. and now, I shall not repeat this error.

Any soln for blue screen.

Kind regards...

Depends on the blue screen.

You are able to write code for the blue screen error?

BSOD (Blue Screen Of Death) tend to be caused by software problems, so there may be an easy solution to the problem. However, they can also be caused by serious hardware problems that may be more difficult to correct. In all cases, we will need the code error to determine what went wrong.

HP deskjet 1510: blue screen of death with the installation of the printer

I installed a new HP 1510 about 3 weeks, no problem... then there's 5 days started to have the blue screen of death (BSOD) on & above. Several hours and attempts to update other drivers, I uninstalled the printer, did a system restore and it worked fine. No BSOD more.

Waited 2 days, for sure - then reinstalled and the same thing all over again. So have uninstalled and reinstalled 3 times.

Ran malware and virus program and nothing came. At the end of my mind - help, please!

I solved the problem by moving to a port 2.0, restore to an earlier time, and then reinstalling.

'blue screen of death' after installation

Hello

I reccently purchased the photosmart HP 5520 all-in-one, and the installation was fine on my Dell Inspiron 1564 (Windows 7). However the next day when I took it to the University, the computer began to 'blue screen' and closes. The error code was 'no thread"and since I install wireless printing the previous night, I can assume that the printer Wireless Setup or my computer is the problem.

I took it to a technician, and the problem is not moved on its network, but always happens on the University network.

I have updated what Dell drivers I believe relevant and cannot see any wireless driver that could fix the HP printer. Can someone help me with this? The printer is fantastic, but just need to use my computer to College!

Thank you, James

Here's a thread from Windows that you can do to solve this problem. Probably, from what I can tell, your BIOS may need to be updated or you won't have enough memory to run the task:

http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559239 (v = vs. 85) .aspx

Let me know if it helps!

Windows 7 Blue Screen Of Death after HDD Turnt off automatically. ;-; Help?

So, I had a break from my computer for 30 minutes and then I went back and when I moved my mouse to wake it up. He did all the normal sounds and I was about to click on Cinema 4 d but then the blue screen of death that happened. This isn't the first time. The last time I lost some of my files :(

Help, please.

MEMORY. DMP: https://www.mediafire.com/?282vd0lmebffc8w

These accidents were related to the corruption of memory (probably caused by a driver).

Run these two tests to check your memory and find which driver is causing the problem. Launch auditor. You don't need to run memtest again unless the auditor is not the cause, or you want to.

If you are overclocking anything reset by default before running these tests.

In other words STOP! If you don't know what it means that you're probably not

1-Driver Verifier (for full instructions, see our wiki here)

2-Memtest. (You can learn more about running memtest here)

Blue screen of death after running the update from microsoft.

Stop: 0x0000007e (0xFFFFF800010305C3, 0xFFFFFADEC2E08150, 0xFFFFFFFFC00000005, 0xFFFFFADEC2E07B60)
It is the only information I get the blue screen. It is a new workstation 7500 Dell with Windows 7, downgraded to Win XP Pro (because of the requirements of software). I have two more 7500 workstations that are exactly as this one do not experience this problem. I was pulled to microsoft update and expressed option, begun to load all the necessary updated (27) and one failed. The Net.Framework 1 after install, I was asked to reboot. When it came, it stopped support windows with the blue screen. This system is as follows:

Dell Precision T7500 workstation

1 CPU X 5570 Quad Core 317-0277 2.93GHz,8M,6.4GT/s,Dell Precision T7500

1 317 - 0333 12 GB DDR3 SDRAM ECC 3x4Go, 1066 MHz, Dell Precision TX500

1-320-7900 dual 1 GB PCIe x 16 NVIDIA Quadro FX 3800, Quad-Monitor, DVI + 2DP, Dell Precision TX500

1 341-9040 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

1 341-8835 C25, all SAS, RAID 10 hard drives for 4 hard drives, Dell Precision T7500

1-468-4322 Windows 7 Pro 64-bit Downgrade to XP Pro 64 - bit SP2, media, English, fixed precision

1 421-1993 Windows 7 Downgrade RLOB

1 430-3434 PCIe 10/100/1000 NETWORK CARD precision

1-313-7458 data DVD 16 x - ROM only Dell Precision TX500

1 421-0536 Cyberlink Power DVD 8.3, with the media, Dell relationship LOB

1 313-7774 Dell AX210 two piece stereo speakers (black) to the precision of the Optiplex and Latitude

1 power supply 330-3555 Precision T7500

1 330-3156 documentation, English, Dell Precision

1 power cord 330-3157, 125V, 2 M, C13, Dell Precision

1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

1 341-9032 PERC6 / i SAS/SATA hardware RAIDCard - for the connection of InternalHard readers, Dell Precision T7500

1-330-3571 Resource DVD contains Diagnostics and drivers for Dell Precision T7500

1 shipping material of 330-3569 for system Dell Precision T7500

1 410-1862 adobe Acrobat 9.0 English and French, BND, precision Dell OptiPlex and Latitude

1 420-6712 Microsoft Office Professional for Latitude, OptiPlex, Precision

1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

Thanks Swahti. My resolution is to return the manufacturer since it's brand new and make an Exchange.

Blue screen of death after installing Windows updates that are automatically downloaded

My computer got up until I get the blue screen whenever I try to install a Windows Update automatically downloaded. The list of updates pending installation are KB978207, KB974470, KB971644, KB972270, KB905866, KB960362 and KB890830. The first time that I have updated I just had the system install 7 all at the same time. I got the blue screen and the computer may not restart normally. Made the system restore and I tried to install each update one at a time. 7 all finished by gives me the blue screen with no reboot successfully after one of them. I don't know what to do next.

Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Blue screen of death after the update installed at startup upward.

Similar Questions

Maybe you are looking for