Blue screen of death * STOP: 0x0000007E Please help

A problem has been detected and windows has shut down to prevent damage to your computer.  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: make sure that you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.  Technical information: * STOP: 0x0000007E

the only defense I have for her is fire threat.
My windows XPS 400 computer was needing an update and I repeated restart later then I did go to sleep and when I tried to log on that came to the top.

The figures I got were

STOP: 0X000007E (0 X 80537008, 0XB84C33B8, 0X000001D, 0XB84C30B4)

It won't let me connect to one of the modes.
 
If you need more information ask.
 
Help is very appreciated.

Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

Solution:

1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

3. type: BATCH spuninst.txt

4. type: exit

Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

-Tom Steele
http://www.hawkandtom.com Tom Steele

Tags: Windows

Similar Questions

  • Blue screen of death - STOP: c0000218 {Registry file failure}

    Original title - Blue Screen of Death

    I got a BSOD that reads the following:

    STOP: c0000218 {Registry file failure}
    The registry cannot load the hive (file):
    \SystemRoot\System32\Config\DEFAULT
    or its log or alternation.
    It is damaged, missing, or not accessible in writing.
    Beginning physical memory dump
    Total physical memory dump.
    For more assistance, contact your system administrator or technical support group.
    I don't know if anything can be done without having to take the computer for repair. Any help or answers are greatly appreciated!

    Hi sarajt


    When exactly do you get the Blue error screen?

    Please refer to the Microsoft article provided below and check if the steps help you solve the problem.

    http://support.Microsoft.com/kb/830084

     

    I hope this helps.

  • Blue screen of death (stop 0x0000007B) after April Windows Update on XP Home.

    My machine (Dell Dimension 3100 with XP Home) home is set for automatic recovery of Windows updates. I reload often, but when I was forced to start again last week, I got the blue screen of death. Apart from the general BSOD error message, I got the stop code:

    STOP 0x0000007B...

    I forgot the subsequent stop codes, but search recall I was doing on them indicated drivers disk or storage-related problem.

    I ran all sorts of Dell diagnostics on my hardware, get absolutely no problem. Scan of a viral infection was also negative. A colleague help out me suggested removing the updates of Windows of April, he did help and usefulness of the ERD. XP loaded and started after that, if I had to go through a process of slooow restart for most updates. My office also now charge many times slower - I suspect drivers and services can't find what they expect to find and take considerable time to make mistakes.

    My Dell has a range of Intel (RAID-1) matrix installed. I strongly suspect that this pilot was in trouble after the April update Windows Update.

    So, what should I do to prevent this from happening again? I don't know the specific fix involved. I have disabled the automatic updates for now.

    TIA

    Rick

    Complete sweep of Kaspersky AV, booted from the CD, turned up negative, so I doubt that it is an infection.

    I'm sorry, but this does not exclude the possibility of infection. See step # 3 in my previous response, or contact Ms. PCSafety for assistance.

    Or see http://msdn.microsoft.com/en-us/library/ff559218 (VS.85) .aspx and/or http://aumha.org/a/stop.php#0x7b for more troubleshooting ideas.

    Or if you let Windows Update to install an update for the driver (never a good idea), try a roll-back of pilot.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Blue screen of death: stop error: 0X000000CE

    Hi, I think I got a bad virus on my computer that's all waste.  First of all, it all started when I clicked on a link, while the Christmas on Black Friday shopping. Then I got a download of unwanted software, called system difficulty, (the small icon of Windows) I could not use system restore to remove, whenever I tried to use it, it says cannot restore on this point. Tried several other points, but no joy. Can I get the dreaded blue screen of death with a stop error: 0x0000008e (0xc0000005, 0x804f8e80, 0xef76aa98, 0x00000000). Could sail in safe mode and tried to fix it with antivirus software, found 26, abducted, ran spybot search and destroy, found nothing. Still no joy. So today, I tried to start in safe mode, and it does not work in safe mode, guard reboot again and again. Then I hit F8 and turned restart turned off so I could see the Blue error screen that would flash for just a second, and now I have this stop error message: 0x000000ce (0xf88be6dc, 0 x 00000000, 0 x 00000000, 0xf88be6dc). I read forums on video and all drivers, but this happened just after I clicked on this link and got the virus with this unwanted software download. Anyone got any suggestions on how to solve this problem? Oh and I downloaded a program called error repair of my other computer and installed but it only scan my computer to find errors and then he wants to buy you the pack premium, so that did not help. It's my computer business running windows xp pro service pack 3. Wish it would have been on this cause she has the system recovery and it worked whenever I had a virus, I couldn't get rid of that. Thank you, Steve

    JoseIbarra is the expert resident on the Recovery Console and chkdsk/r. I'll track down his instructions. If the malware is responsible for the BSOD, I do not think that chkdsk /r will help, but it won't hurt. Or you might need to repair your boot.ini file.

    DEFINITELY get this brand XP reinstallation CD Dell! You can use it to perform a clean installation of XP or a repair installation of XP (chances are, you won't ever need to perform a repair installation, but it is nice to have this option) or to enter the Recovery Console to perform functions such as chkdsk/r.
    Chances are that your data does not fit on one CD! Depending on what you have, you might need to up to 100 CDs or more! Better to buy an external hard drive. Newegg.com has a very good selection of the most affordable. Here is an example:
    Creating a Ubuntu CD bootable 'live' (and then startup out of it, rather than on your hard drive) will allow you to copy your data to the external hard drive:
    There are also some other CD bootable antivirus (like Avira) which may help you:
    Here is a link to the instructions of Jose:
  • Blue Screen errors and random crashes, please help!

    Hello, I built a computer about a month back, and now, whenever I try to play games and talk on Skype/teamspeak all crashes saying that nothing does, and when I try to open another program it crashes instantly and now I get random blue screens. Here's the code for the blue screen: STOP: 0X0000007E (0XFFFFFFFFC0000005, 0XFFFFF80002E9CBFI, 0XFFFFF880009A99D8, 0XFFFFF880009A9230) I look at the time and make sure that nothing is overheating, but it sews blue screen randomly, I tried to install windows debugging tool, so I can see the dump file, but whenever I try to install it, it says installation failed, it's my only computer, and I need it for school help Please.    Also, when I got this computer ready to go, I took the hard drive from my old computer and transferred the files and some games.

    System Specs:
    NZXT Guardian 921 RB black, blue LED
    Two Green Logisys sound active Cold Cathodes
    AMD Phenom II 970 x 4 3.5 Ghz
    Zalman CNPS9700 LED blue 110mm 2Ball CPU Cooler
    HIS Radeon HD 5670 Itceq
    OCZ ZS 750w ATX POWER supply
    ASUS M5A97
    8 gb Corsair Vengeance 240 pin 1600 mhz
    1 TB Seagate Barracuda 7200 RPM
    Windows 7 home 64-bit

    Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    -

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    -

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    -

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    -

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    -

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    I hope this helps. Good luck.

  • blue screen of death-stop 0xED-Unmountable_Boot_Volume

    I have a desktop Dell 7 years with XP and have met the unmountable boot volume error message. I have a XP cd and you forgot the admin password. Everything I tried was the blue screen. Y at - it a hope? or is it a bit of scrap? Help, please.

    The solution to your problem is in this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

  • Equium A60: XP blue screen of death: Stop: c000021a - fatal error message

    "Stop: c000021a {fatal system error} the Session manager initialization system.
    ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000). The system has been shut down. »

    This is the message I get on a blue screen. I can't start the computer. His tent to restart conineously after this error message. What could be wrong someone can help.

    my system is equium A60, running on windows xp sp2 installed very recently.

    Thanks in advance.

    You should check the support microsoft help you dosent his good companion
    This, you should get started http://support.microsoft.com/kb/317189

  • Blue screen of death - Stop 0x7E

    Hi guys recently I was struck with tht stupid vista 2011 anti spyware stuff... so I opened a session in safe mode and ran a scan through malwarebytes and removed 2 nw virus, trying to logg bk in normal mode, I am struck BLUE SCREEEEN of thoughts and suggestions? I've read a few threads, and my friend ask me to remove these 2 speed of the temp folder in appdata (WERf085 and WER 66503), it went well for 5 minutes, but again, I still have the same problem... I tried other ways boot upward as well, but no results, I did 3 times the system without help restore... Please someone HELP ME here is the last report I got the blue screen crash
    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 1000007e
    BCP1: C0000005
    BCP2: B3373976
    BCP3: 88D5BA20
    BCP4: 88D5B71C
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini122911-02.dmp
    C:\Users\Noah Samson\AppData\Local\Temp\WER-72212-0.sysdata.xml
    C:\Users\Noah Samson\AppData\Local\Temp\WER54D.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Noah needs help, when the antivirus suddenly starts to have problems, it is usually something in the sense of the update of the components, but not all of them successfully doing so. This is due to the antivirus feature. That being said, I took a look at the dump and noticed that drivers are a little old standards antivirus. For example: C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. SYS Mon Jan 14 17:29:24 2008 SRTSPL SRTSPL. SYS Wed Oct 08 15:54:43 2008 I would like to recommend the following after speaking with the support of the school first: download the latest version of Symantec; Uninstall the version currently on the system; Reinstall Symantec with the version downloaded in step 1. Let us know if you have any questions. Best regards, Matthew_Ha

  • Blue screen on the work computer please help!

    Since I started working here my computer breaks down and they do nothing about it. We have no IT support and they blame me for everything that happens.

     

    That's what he says, that's the problem.

     

    Signature of the problem:

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.256.48

    Locale ID: 1033

    More information about the problem:

    BCCode: d1

    BCP1: C314CF5D

    BCP2: 00000002

    BCP3: 00000001

    BCP4: 90453E26

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 256_1

    Help!

    VSM

    Hello Valencia,

    Thanks for posting your question in the Microsoft Community forums.

    To provide the proper resolution, that I would need more information on your side.

    1. when, exactly, you get this error message?

    2. did you of recent changes on the computer before this problem?

    I suggest you try the procedure described in the article and see if it helps.

    Resolve stop (blue screen) error in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    Note: When you restore your computer from a system image, the contents of your hard drive is replaced with the contents of the system image. This means that any changes you made, you have it installed, or you saved after the creation of the image of the file system will be probably lost, unless you have a recent backup of your data.

    Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.

    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. If you reinstall windows, make sure you back up all your data.

    Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

  • Blue Screen of Death STOP: 0x0000007B

    I have a HP Compaq dc7900 Convertible Minitowers (Energy Star).

    This computer has a boot sector virus and I need to be able to access the fdisk (from what I made of the research) through BACK.

    Can I have forgotten something, but I can't seem to understand how access BACK to make new partitions to re - install XP Pro.

    Thanks in advance for your help.

    -Texx

    If you can start with Partition Wizard cd without blue screening, you can simply adjust the setting of the SATA/AHCI Mode IDE BIOS to install XP.

  • CD/DVD drive, causing the Blue Screen of Death stop

    Software from CD/DVD in my Dimension E510 desktop seems to be the dreaded blue screen shut downs - usually as a CD is ejected. The web page error analysis Windows that appears after that restart indicates the problem is caused by a resulting driver. It's the Sonic Digital Media software provided on the system, but sometimes when I run the program I get a warning message saying that the software is not an approved final version? I would like to uninstall the Sonic CD/DVD software which seems to be the cause of the problem and replace it. This will probably solve the problem of the "blue screen", and which would be a recommended CD/DVD operating system that would be compatible with my system. Any suggestion would be appreciated.

    Name of the operating system Microsoft Windows XP Professional Version 5.1.2600 Service Pack 3 Build 2600

    System manufacturer Dell Inc.

    System model Dell DM051

    System Type X 86-based PC

    Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz

    Total physical memory 1 024,00 MB

    Available physical memory 479,88 MB

    Total virtual memory 2.00 GB

    Available virtual memory 1.96 GB

    Drive D:

    Description CD-ROM drive

    Name the HL-DT-ST DVD - ROM GDR8164B

    Manufacturer (Standard CD-ROM drives)

    IDE\CDROMHL-DT-ST_DVD-ROM_GDR8164B___0D08___\5&29A96F35&0&0.0.0 PNP device ID

    Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

    Drive E:

    Description CD-ROM drive

    _NEC DVD +-RW ND-3530 name has

    Manufacturer (Standard CD-ROM drives)

    IDE\CDROM_NEC_DVD+-RW_ND-3530A___103C___\5&29A96F35&0&0.1.0 PNP device ID

    Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)


  • Vista will not start and the Startup Repair boots in a blue screen of death. Why?

    I select run a startup repair, and it goes straight to the blue screen. When I start normally it justs sits there with the bar go green around and around. System Restore also dosen't help. I can boot into safe mode, but I don't know of other programs of Diagnostics. In addition, no virus. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Read the posts by spirit MVP in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"

    Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter

    Hi all

    I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)
    A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:
    STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)
    AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801
    I couldn't find anyone with the same problems. Can you help me?
    Thanks in advance,
    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
    We prefer at least 2 DMP files to track trends and to confirm the cause.

    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

    If you have any questions regarding the procedure, please ask

  • More recent Microsoft Update caused 'blue screen of death '. screenshots included, HELP Please!

    Hi, I am running Vista on an Acer Aspire M3641 and I had no problem since buying it there, until the other day, it's about 8 months.
    2/3 days ago I updated my computer with the latest Microsoft Update before closing down, went to my friends house, came back, the machine and my computer crashed at turn on. The blue screen of death appears literally for a second or 2:
    http://img69.imageshack.us/img69/6483/100220101146.jpg
    Then, a message called error recovery Windows appears, he gives me the possibility of either start Windows normally (which comes to restart the computer) or launch a startup repair.
    Upon the choice of startup, waiting a few minutes ago the repair, then the messege "Startup Repair cannot repair this computer automatically" and he asked then whether or not he wants me to send information about the problem or not that he won't let me not do anyway, but it allows me to open a window called the details of the problem :
    http://img28.imageshack.us/img28/4053/120220101171.jpg
    AND:
    http://img230.imageshack.us/img230/9734/120220101172.jpg
    After that I have no other choice other than to click on finish, and stop the pc.
    I also tried to tap f8 to start the computer in safe mode, but it is not as
    work, I don't know what to do, if someone could help me that would be greatly appreiciated!
    Thank you in anticipation

    If you are able to get in Mode safe mode with command prompt then try the items listed in this article.  Let us know the results. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I got the Blue Screen Of Death with Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

    Original title: Help, I got the blue screen of death!

    Can someone help me please? Whenever I turn on my computer, it goes to the BSOD. I tried the last settings that worked, but he went to the BSOD too! In addition, safe mode it won't work goes to the BSOD as well. Nothing works. I have to go to a computer store to fix it, or is - it possible to fix it at home? Please help immediately!

    The BSOD I get says:

    A problem has been detected and windows has shut down to prevent damage to your computer.
    If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /f to check for hard drive corruption, and then restart your computer. Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

    Hi TheCookeNinja,

    I suggest you run the check disk (chkdsk) of the Recovery Console & check if you are able to boot to the desktop correctly.

    Step 1: To start the Recovery Console, you can follow this link.

     

    To start the computer and use the Recovery Console

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_overview.mspx?mfr=true

    Step 2: At the Recovery Console prompt, type the following command and then press ENTER:

    CHKDSK [/ p]: [/ r]

    Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

    Reference:

     

    How to install and use the Recovery Console in Windows XP

    http://support.Microsoft.com/kb/307654

    I hope this helps.

Maybe you are looking for

  • MacPro 3,1

    This is the machine I want to upgarde to El Capitan Model name: Mac Pro Model identifier: MacPro3, 1 Processor name: Intel Quad - Core Xeon Processor speed: 2.8 GHz Number of processors: 1 Total number of Cores: 4 L2 Cache: 12 MB Memory: 4 GB Bus spe

  • Satellite L10-205: CD Writer 2 DVD writer

    Mr. President is respected...I would like to know if I can change my laptop CD writer in DVD writer super multi. even instead of Toshiba I searched for a long time on this subject, but I don't have a specific answer, and so I decided to ask my manufa

  • Install the new OS via CD-ROM PCmcia on 3110CT

    Hello I really hope that someone can help me because I'm going out of my mind trying to install a new OS on my Portege 3110CT So far, I've tried Windows 98, 98SE, and 2000, I can get them all to install via a back of the PCMCIA card driver, I found b

  • Can satellite A300-15j - I disable the system beep

    Hello I have a laptop Satellite A300-15j.Is there no way to disable my Bell System? It's sound is very loud and annoying.I would have run a big mysql script with errors soon and my Bell system had become crazy. My cell phone sounded like an alarm and

  • New iMac, Time Machine backup

    I'm moving to a new iMac. On the new iMac, I can't use the Time Machine backup of old Mac. I "removed" the time of the old iMac Machine. Every time I try a backup on the new iMac, I get a "backup failed" the Time Machine backup is already in use. »