Blue screen on HP Pavilion dv4-1115ef

Similar Questions

• Common blue screen of HP Pavilion dv6

  Hello dear friends Forum;

  I have a HP Pavilion dv6, with Windows 7 Home Premium 64 - bit service pack 1.

  "It produces a frequent (every 40 minutes or more) a blue screen with error message"igdpmd64.sys", PAGE_FAULT_IN_NONPAGED_AREA.

  How can it be resolved? I've restored earlist day restore showed me.

  Thank you for your support;

  Gus

  Uninstall the update of Windows KB2670838

  How to remove an update

  Please post your result here in your thread.

• Windows Resume Loader black screen on HP Pavilion dv4-2145 dx laptop Windows 7

  I have a HP Pavilion dv4-2145 dx laptop with Windows 7. After pressing the button "on", the logo operation windows says its "recovery" windows, but a black screen titled "Windows Resume Loader" appears with the following message:

  The last attempt to resume the system from its previous location failed. Attempt to resume again?

  With the 2 following options:

  1. continue with system summary, (which does not work and I end up with the resumption of the "Windows" followed a blank black screen...)

  2 Delete restoration data and proceed to system boot menu (I haven't ' truei stops because I wasn't sure what that meant)

  But I managed to go to the reviews section diagnostic systems and it seems that he pass all 5 of the test, including hard drive and memory, poster, etc. So I don't know what the problem...

  Please notify.

  Thank you very much!

  Hello

  I think that in this case, you will have to choose the second option - "Delete restoration data and proceed to system boot menu" and see if that fixes the problem.  If all etc. documents you had open before hibernation were saved, then you should not lose anything.  If there are unsaved changes (for example if you have added to a document), the file will be to the point that his last record and you lose additional data.

  Kind regards

  DP - K

• No volume screen for Hp Pavilion Dv4 (2011)

  This is the first time I had an Hp laptop and I just noticed that there not display when im changing the volume using volume keys, it works and all but just no display on the screen so I have to manually check the volume level.

  Same question about the brightness setting, I think it would be much easier to check the level of volume and brightness, if she had an on-screen display.

  Is it normal that my laptop? If this is not the case, how can I fix it?

  I have a HP Pavilion Dv4 2011 edition, running in Windows 7 Home Premium 64-bit.

  Help please.

  Hello

  Although not specifically for your laptop, try to download and install the HP OSD utility on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

  After this Setup is complete, restart the laptop.

  Kind regards

  DP - K

• Replacing screen on HP Pavilion dv4-2049wm?

  My laptop had a rash of engine and crashed about 4-1/2 feet, trying to fly across the room and cracked the screen leaving only about 25% visible.  I found the replacement online screen, but I can't find instructions on how to proceed.  Someone at - it experience with or have knowledge of a link that can see the / tell me how to replace the screen?   Thank you very much...

  This video explains well enough:

  YouTube, of course

  I've done several times, and it's actually one of the easiest elements of laptop repair on most models. You can also have the Manual:

  Manual

  The dv4 is slightly harder than most, because you have to remove the entire screen set in the place where the hinges connect to the main part of the laptop to get to the screen itself. If the video is not 100% reliable for you. It shows the method easier to simply remove the front plastic, which applies to most laptops, but not the dv4, but much of the video is useful.

• HP pavilion d4790y displat a bands and error blue screen

  HP pavilion d4790y displat a scratches, then blue screen error "cannot reset the display driver and recover from timeout failed" running GEForce 7500LE w/tv, DVI output, VGA has my card that went wrong? only to start in safe mode under vista home premium CPU Intel Dou processor E6700 2.66 GHz SATA hard

  Hello

  Try another monitor and cable on your PC in order to eliminate the PC as possible problem. You can also try your monitor and cable on another PC.

  Open your PC and see if the fan on the video card.  It can be full of dust.

  If the card turns out to be defective, must you output s-video port? If so, then look at this 9500 GT from NVIDIA.

• Replace my screen from damage. HP Pavilion dv4 14 ''

  How it will be difficult to replace my screen damaged myself. Pavilion dv4 S/N [number of Series edited by Moderator] P/N LW194UA #ABA

  Thanks team

• HP Pavilion dm4-1024tx Enterta: upgrade to 8 GB of memory and is blue screen problem

  Product: HP Pavilion dm4-1024tx Entertainment Notebook PC
  Product number: XC651PA
   
  I have corsair Vengeance ram 8 GB (CMSX8GX3M1A1600C10) that as a result of the configurations as mentioned below:
   
  SPD 9-9-9-24 latency
  SPD speed 1333 Mhz
  SPD voltage 1.5V
  PC3-12800 (1600 MHz) memo speed
  Tested latency 10-10-10-27
  Tested 1600 Mhz speed
  Tested voltage 1.5V
   
  It passes the test of memory BIOS.
   
  BIOS VERSION: Hewlett-Packard F.27, 21/12/2011
   
   
  But when I boot windows 7, it shows the windows symbol and then it shows the blue screen with the error
   
  STOP: 0X0000007E
   
  If I replace memory corsair with the memory that has been delivered with the laptop the system only works very well.
   
  Corsair memory is not compatible with the system?
   
  I have a dual boot and installed ubuntu on this subject. Ubuntu loads perfectly fine, but after a while the system restarts automatically (IE open application).
   
  I tried memorytest86 to test the memory, but the application continue to crash and reboot and does not provide any results.
   
  Help, please.

  The RAM is not compatible. The system allows a maximum total memory of 8 GB and uses DDR3-1333 which downclocks at 1066 speed. You cannot use a single module of 8 GB. 4 gigs is the large single module supports the system. I suspect the memory that you have will work fine if you had modules of 2 x 4 GB instead of a single module of 8 GB. That's why memtest is not finished. The controller memory motherboard is not able to take up 8 GB of RAM by a single channel.

• Screen & player stalls voids on Pavilion dv4-2045dx

  Having formerly operating Pavilion dv4-2045dx a friend.  When turned on, no screen activity is displayed.  Hard diving turns upward, but not for very long, so it doesn't seem as if Windows is actually behind the empty screen loading.  I tried to connect a monitor to the display port, but nothing appears on the external monitor or integrated display.  The command has been removed and the data seems to be intact.

  I guess the screen is dead and with it the computer.  Any suggestions before I tell him, is it time for a new laptop?

  Physically, you need to open the case and look at the type of processor before ordering a new. I'm not sure of the dv4 on top of my head, but some use laptops that are welded on the processors and you should replace the whole Board. In addition, with processors, you might be able to get more life out of it by scraping of old thermal compound on the CPU and the heat sink and thermal paste new application.

• replace screen on laptop HP Pavilion dv4-2165dx

  How to replace the screen on laptop HP Pavilion dv4-2165dx

  This youtube video is useful:

  https://www.YouTube.com/watch?v=cl7uEN_S0dk

  Where do you live (country)? We can help you find a replacement screen at a good price.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion DV6 3055tx blue screen after RAM Upgraderei

  The product name and number: HP Pavilion dv6 3055tx

   

  Pre-installed RAM: 3 GB
  

  Operating system: Windows 7 Home Basic 64 Bit (90 days)

   

  Error message (if any): blue screen on startup of the BONE
  

  All changes to your system until the problem occurred: RAM upgrade

   

  In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

   

  One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

   

  Corsair 4 GB DDR3 RAM simplified eBay India

   

  After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

   

  After this, I restarted my system

   

  When starting Windows came to loading blue screen suddenly comes and laptop restarting

   

  Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

   

  I gave my chance for both, but the same blue screen.

   

  After that, I removed the two Rams and inserted as a single Corsair

   

  Same blue screen

   

  Then I open BIOS and it says 4096 MB installed memory

   

  After that, I inserted the 2 GB with it means Total two-channel 6 GB

   

  But again Blue Screen and BIOS saying 6144 MB

   

  What is the problem?

   

  Please help me solve the problem.

   

  The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

   

  Thank you... Waiting for a good answer

  Hello:

  I can't find any specs on that you bought it from memory.

  Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

  You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

  You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

  You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

  I think you bought PC3-12800 memory and this is probably the high density - two bad things.

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R

• HP pavilion g6: password blue screen

  I have a hp pavilion g6 and my password blue screen or a power on password does not work. However, after three unsuccessful attempts, I get this code: 58829306. Pls I need help.

  @1luvT

  Enter 47781928

  REO

• HP Pavilion dv4 screen black 1428dx / refuses to start up

  I have problems with my laptop (HP Pavilion dv4 1428dx) the last thing I did was paused, then cameback and tried to wake him up but it would not start up. All the lights are on, but the screen is black and the only thing that I hear the fan moving. The caps lock and num lock keys have a light flashing, not really sure what it means. The power light, battery light comes on, but the hard drive LED is not on. This computer is nearly 3 years old and I've never had a major problem like this until recently. If anyone has a solution that I'd be happy to appreciate them.

  Thank you for your time,

  Freshman4002

  The blink codes State caps lock/caps lock Num because it might be just the caps, just the number lock lock, or both.  If both blink, then it counts as a blink every time.

  If it flashes once and a break of 3 or 4 seconds, then tells the CPU POST test failed.  A processor failure usually requires a new processor, but some have been able to open Notepad for reinstall process and apply new thermal paste to get the problem resolved.

  If it is under warranty, I would advise you contact HP for service.

  If it is out of warranty, then I would contact HP to get a quote and compare that to the cost of a local PC shop to weigh your options.

• Blue screen at startup windows 8 on attempt of fixing hp pavilion 15n invalid process

  Hi evrybody,

  I FAQ had this problem when I start my laptop (hp pavilion 15n021se) on the lock screen, when I click to enter my password, just after the cruser mouse movement I get the blue screen saying that the error "Invalid attempt to fixing the process.

  I searched this error and most of the results met my thoughts that the cause of this error is the touchpad driver.

  I installed the latest version of the driver (sp64225), and it is not suitable for my windows, so I want a previous version of the driver please

  and if there are possible causes other than the touch pad I'm enjoying mention of it and its solution

  Thank you & hoping to solve my problem

  Thank you for your kind help: super mario

  I actually use the usb mouse, that's why I thought the problem with touchpad driver, so I asked for a previous version of this device other than sp64225.

  So to make the touch pad, perfect work and prevent display of BSOD again once I already uninstalled the driver I downloaded from hp website (sp64225) and then I updated the driver from windows itself via the Device Manager and it worked perfctly.

  So the solution has worked with me is to uninstall the hp driver and update the Device Manager devices, & till now the BSOD doesn't apear

  Thanks again for your test from supermario