: Blue screen on my laptop which is runningWindowsXP the connection of the process window termiated unexpectly having the status of this system was arrested (I have windows xp)
could someone please help me turn my computer again it is the problem:
Blue screen on my laptop which is runningWindowsXP the window connection process termiated unexpectly with status OxC00000135(0x00000000 0x00000000) this system was stopped (I have windows xp)
Hello
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
LC
Tags: Windows
Similar Questions
-
Why what I get a blue screen on my laptop, and then it restarts
Remember - this is a public forum so never post private
Ideas:
- Why I get a blue screen on my laptop and then rebootingPrograms with the fact that you have problems
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
§ What is the exact error message that you encounter the blue screen?
§ East - this happen randomly or whenever you access any program on the system?
§ Remember to make changes to the system?
§ Since when are you facing this issue?
Give details, so that we can help you in a better way.
I suggest you disable automatically restart the system and check the exact error you encounter in the blue screen and let us know. Follow the steps mentioned below to disable the auto reboot.
a. right click on my computer and then click Properties.
b. click on the Advanced tab.
c. under Startup and recovery, click settings to open the startup and recovery dialog box.
d. clear the checkbox automatically, restart and then click OK, the number of times required.
e. restart your computer so that the settings take effect.
Method 1:
Step 1:
In safe mode, check if the problem persists. Follow the steps mentioned below.
a. restart the system and then keep tapping F8 until you reach the start menu.
b. Select safe mode from the list and press ENTER.
If the problem persists then in safe mode, I suggest you to do a clean boot. Follow step 2.
Step 2:
Follow the steps mentioned in the article below.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Method 2:
I suggest update you the drivers on the system for the graphics card, etc. on the sound card system and check if the problem is resolved. I suggest update you also the drivers from the chipset on the system and check.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello Hello.
can someone help me why this error is coming.
I use a laptop lenovo.
Error details:
product-windows stytem, operating
ID-1003,
source-system error,
version - 5.2.
sysmbolicname-ER_KRNLCRASH_LOG,
error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
Concerning
Chandra Murali
.net developer,
HYD.
Hi Murali,
· What is the random question?
Try the following.
Method 1: Check for memory questions
Microsoft Online Crash Analysis - windiag
Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.
-
I recently got this blue screen and I don't know what the problem is.
* Original title: blue screen problem
Hello, I recently got this blue screen and I don't know what the problem is.
I use a # model Sony Vaio VGN - FW510F & my graphics card is ATI Mobility Radeon HD 4650.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033The blue screen mentioned this error: 0x000000EA
More information about the problem:
BCCode: 100000ea
BCP1: FFFFFA80041B8170
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\020615-46550-01.dmp
C:\Users\Andy\AppData\Local\Temp\WER-92976-0.SysData.XMLRead our privacy statement online:
Privacy statement for Windows 7 - Microsoft WindowsIf the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtAbui91
These were related to the 5 year old video player. I remove the current driver and install the latest driver available.
-
The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?
Original title: clear the display
Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.
Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.
You can now close the Power Options pane when you return.
-
When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?
Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."
-
How do I know which node of the instance is this session connection to?
Hello
with PAP, how do I know which node of the instance is this session connection to?
I want to I know which node I am connected.
Thank youSelect instance_number, instance_name, host_name
from V$ instance;Concerning
Asif Kabir -
16/09/25-00:04
Product name: HP notebook - af101nh 15
Operating system: Microsoft Windows 10 (64-bit)
T.Forum!
My laptop sometimes unexpected Blue Screen of Death error message:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
%System% bcmvwl64.sys order-DRIVERS-bcmvwl64.sys
I ask for help to resolve.
Hello.
Joco60Hello
Try reinstalling the driver lan wireless Broadcom on the following link.
http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74654.exe
Kind regards
DP - K
-
I do not quite understand computers.
Randomly, I received a notice pop up saying that I need to backup my files because windows detected a hard disk problem.
I did scans and system restore but nothing works.
I used to be able to access safe mode, but now I do not get this option.
I kept getting the blue screen of death to do something.
But now I have nothing other than the loading page "TOSHIBA Leading Innovation".
I have a Toshiba laptop, his more than two years and use Windows Vista.
No miracle solution?
Or should I bring to wait for him?
If so where I will get the best service at afforable prices?
Hi BethanyLa Chappelle,
I suggest you perform the steps in troubleshooting from the following link and check how it works.
-
Blue screen on Asus laptop when it is connected to the printer OfficeJet 4620 computer
I have a laptop Asus U47A, Windows 7, 64 bit. When I connect my laptop to the printer Officejet 4620 via USB and it has print my computer gets the blue screen and turns off. This doesn't happen every time, however. I tried to uninstall and reinstall the printer software, and I tried to plug the usb cable to the port instead of port 3.0 2.0. None of this worked well. Any suggestions?
This problem normally only when the USB 3.0 port is used and the Intel chipset that causes the problem has not been updated. First of all update and see if it helps. Here's my post on how to know who is who, but also update this driver:
In addition, you need to maybe just remove the software and reinstall from the software available on the site of HP full setting:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5191646
Let me know if that helps you!
-
Blue screen on startup... problem with the display driver?
I have been using a Dell Inspiron 14R (N4110) laptop computer since 2010 without any problem.
The laptop was purchased online from Dell and came with
(1) Windows 7 Home Premium 64-bit and
2) AMD Radeon HD 6470 M - 1 GB display card.
Recently, I had a problem where my laptop just wouldn't start, showing the blue screen every time it tries to start. The blue screen mentions a problem with the file atikmpag.sys I understand is the driver for the AMD video card.
If I delete/rename the files atikmpag.sys and atikmdag.sys (via secure boot mode) in C:/windows/system32/drivers, the laptop (not) start, but obviously does not recognize the graphics card.
After a lot of unsuccessful trials debugging on mine (including trying to upgrade the drivers to display etc.)., I reinstalled the operating system and the drivers provided with the original kit (just to eliminate any possibility of an upgrade that went wrong). However, I still see the issue.
That means there is a hardware problem? or a BIOS problem?
Thank you
R.B.
Guys, the problem you describe is actually a hardware failure. There is nothing you can do except replace a motherboard for laptop, or taken some advanced technicians, COMPUTING which will replace or chip GPU reball.
I have the same a laptop similar (Inspiron N5110), with the same problems and these problems - all started yesterday. Do not waste your time, just reinstall OS, then install display drivers, which are available on the official site of Support of DELL and after that - if it's not working, just do what I said.
Generally these are consequences of an overheating laptop, but that it was certainly not my case (I did regular checks), I could even bet on chips quality GPU, which has been used in the manufacture of this model of laptop... again...
UPDATE: Okay, last night was a long night for me and I can confirm finally - who's * chip AMD, which causes the blue screen, you mentioned. I disassembled my N5110 faulty, armed with a heatgun, Probe temperature (probe) and tons of aluminium + some flow of brazing, I made a fairly quick reflow and the result is just what I expected - everything works perfectly again, with the same configuration - even with the same installation of Windows, which has been to launch these blue screens. There are now no blue screen at all and portable computer performance as new.
Apparently bad welding, when this laptop was manufactured, is the exact reason why we are where we are. The BGA chip was not dead at all (it was just poorly soldered). The same story, including HP and a bunch of other companies had some time ago with these NVIDIA chips (I know, some of you know what I'm talking about).
CONCLUSION: Integrated DELL diagnostic software is useless against the detection of defects with a discreet graphics AMD card. Problem was not in the software or drivers - it was just a poorly welded chip (I regularly cleaned my laptop dust, so overheating is not an option here).
-
Blue screen when installing Win XP Pro on the Satellite A100-211
Hi all.
I'm started to get really desperate here! I just bought my new Satellite A100-211 and now I want to install my own copy of Windows XP Professional (as the laptop comes with XP Home). But, when I try to boot from my Win Xp Pro CD (with no SP1 or SP2 integrated), I get a blue screen of the STOP just as the installation application reached the phase "the installation program starts Windows! The STOP message says something about a file named "pci.sys".
I don't know what the problem is or how to install XP Pro! It should be so simple! I even tried the SATA drivers from intel and load the Windows XP Pro install the program installation (F6) with a floppy, but I always get the same blue screen at the same stage of the installation.
Can someone help me please? Can someone explain how to install Win XP Pro on this laptop?
Thank you very much in advance! I'm really really freak out with this
Octavio.Hello
Did you get this error message?
"stop error 0x7E in Pci.sys".I found information on the Microsoft site that you need the latest Microsoft service pack.
http://support.Microsoft.com/?kbid=839641 -
Blue screen errors, hard disk crash and now the windows activation question
These last six months, I had a problem of error frequent blue screen crash. Suddenly last month the drive crashed, hard my computer didn't load windows on several effors, finally the hard disk had to be changed. Reinstalled the operating system after copying the files of restoration for windows, now windows says is not a genuine copy. Now, today still crash blue screen error after from once again, he says that this window is not genuine. MT laptop is a sony vaio 3 years old and came with a preinstalled windows 7 licenses and the key that I use is one written behind the laptop on the microsoft certificate.
He seems to have removed the incompatibility of CID at least.
Please try activating suggestion of Andre now - the system is now simply say that it is out of time, require activation by telephone.
activation by telephone (call of the operator)
Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you
-
blue screen of death with cold clone of the linux server
We have an old Dell Poweredge 2550 running Red Hat 3 Server and we try to use the CD to boot more later/more cold clone to p2v it.
It stops on the CD, and then after that it shows a loading progress bar get us a blue screen of death (bsod) with the following error
STOP c000021a {fatal system error}
The system process Session Manager initialization done in unexpected ways with the State of 0xc000026c.
The system has been shut down
It's hard to detect the controller raid PERC or something? We have since tried to use the stand-alone converter from PC software and point it to the Linux box to see if that process works a bit better, which seems to take too long. I just want to know what happened in the case where the stand-alone converter process decides to vomit on his shoes.
Thank you all,
Brian
Session manager errors are rare with PE - is the CD ok? -, it starts in a virtual machine?
have you tried other CD of coldclone?
This redhat machine has dark material?
as low range or hi-end video cards
___________________________________
VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary
-
I have a HP Pavilion 6500 CTO (?) vintage 2008 model. It came with Vista Premium. It is the only time that I forgot to make a recovery disk, but there is a sort of drive partitioned D that could be disaster recovery. Anyway. .. . . .
I made one of the first Windows 7 Premium Upgrade downloads (I still have the right to download a backup). I also bought 6 months later any when upgrading to Windows 7 Pro.
I would like to donate this laptop to a member of the family, so I would like to start with a clean slate of the operating system and drivers of origin if the wireless hardware and other works. Two Questions
1. If I create a recovery disc in the current state of the computer to have Win 7 Pro loaded, format the hard drive and then try to reinstall the OS from the recovery disk, which will load OS - Vista or Win 7 Pro?
2. see question 1 - it is the best way to offer a new beginning for the system with a reformat and reinstall OS, or is there a better solution? As I said, I don't have a recovery for the Vista operating system disk.
Thanks in advance,
W!
wgrayson wrote:
Cheryl: thank you. I had to google "active partition" and found how how to change active partitions, but I did not know after you change the active partition this restart start RecovManager... Uh, excuse the "duh" question, but I guess you can't have a SINGLE partition active at a time, correct?
The question is a little more complicated. When he restores the computer to the original state, it also roll back updates to the BIOS, or are those left intact? Why ask? At the beginning, on this model of AMD, I had a fan / overheating issue that has been resolved by updating the bios to set when the fan on. I might have to reinstall this update of the bios of HP!
«mark the recovery partition as "active" and reboot, it will then start this partition and start the Recovery Manager»
The bios will not be affected.
.
Maybe you are looking for
-
HP Office Jet 4500 g510a-f: issue of Scanner
I have a Hp Office Jet 4500 g510a-f all-in-one. When I scan a document, it saves it as a jpg. How can I get to save in pdf format? I don't have this option available to me.
-
Hasta con what version of Windows works una DAQ-AT-MIO16XE-10; y hasta con cual version of LabVIEW? Qué Pentium can serve para instalar dicha DAQ? Por favor contestar a [email protected] MUCHAS gracias
-
How to get my Blackjack WMP to work?
I have a Samsung Blackjack thru ATT phone. No use of a simple internet phone. I like to use WMP for my music file, but after downloading music to the playbakc it gives me the error 0 x 80070003. I think that I followed the procedure to download corre
-
Just a small question about virtools. I sometimes play Avatar: Legends of the arena. It always freezes after 5 online games or 1 training. Virtools Player often comes up saying that it broke down. Anyway is to prevent that from happening. And while I
-
Have a Live View remote problem...
I use the remote software a lot and started having a problem in Live Mode when connected to the laptop... If I am connected there is no problem, but when I go to Live View to see what the camera sees it running a little and then give a "Connection Lo