Blue screen on stop ntoskrnl.exe DRIVER_POWER_STATE_FAILURE

My computer blue screened twice now having been to "Shutting down" screen for a few minutes.

I downloaded the 2 .dmp files that I found using BlueScreenView onedrive here:

http://1drv.Ms/1ElvK85

Can someone tell me what is the cause, or how I might solve this problem?

These accidents were related to the corruption of memory (probably caused by a driver).

Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You need not run memtest again unless you want to.

If you are overclocking anything reset by default before running these tests.
In other words STOP! If you don't know what it means that you're probably not  


1-Driver Verifier (for full instructions, see our wiki here)

2-Memtest. (You can learn more about running memtest here)


Tags: Windows

Similar Questions

  • Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

    I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
    I have Windows XP SP2-teacher-pack. I have the original CD of this package.
    But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
    Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

    After reading your following suggession:
    Here are a few things to try:
    The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

    Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

    I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

    Thanks in advance for help
    What about nice Rajneesh

    Just one quick response for others...

    Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

    Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

    Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

    For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

    Have fun, and... Peace!

    Devvie

    ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

    CONARE nullius momenti videri fortasse missilibus careant
    ------
    All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

  • Blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    How to fix blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

    If you are overclocking reset all default before running these tests.
    In other words STOP!

    1 - Memtest.

    * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

    * Boot from the CD and let it run at least 5 or 6 passes.

    Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

    Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.

    If a well-known stick fails in a slot of motherboard, it's probably the slot.

    http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

    2. Driver Verifier

    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

    I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

    So, here is the procedure:
    -Go to start and type "auditor" (without the quotes) and press enter
    -Select 'Create a custom settings (for code developers)' and click 'Next '.
    -Select "Select individual settings from the list complete" and click "Next".
    -Select the entire document except for "Low resource Simulation" and click "next".
    -Select "Select driver names from a list", then click "next".
    Select all drivers that are NOT provided by Microsoft, and then click "Next".
    -On the next page, select "Finish".

    Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you are unable to Windows because it crashes too early, try safe mode.
    If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
    http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

    Further reading
    "http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

  • I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

    Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

    I'm not being updated hardware or software on my Dell Latitude D8380.

    I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

    I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

    Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

    Please can you help. Thank you, Sue Dixon

    Hello

    Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Let us know the status of the issue.

  • Blue screen with stop: 0 x 00000024 (0x84598f58, 0x84598c54, 0x001904aa, 0x8561df51)

    * Original title: I need help please

    I was given an old computer model of ky x n bc laws all im going to do is to type using office 2000... and it worked in food for 5 minutes now, I have a blue screen with stop: 0 x 00000024 (0x84598f58, 0x84598c54, 0x001904aa, 0x8561df51) in my research I found, it seems that I need a recovery disk for this computer did not come with a how can I do to get a... im also secretly hoping that it costs no stupid amounts of money since I'm on a fixed income... Thanks for your help guys o btw, I tried f8 it will o do now and then appears on the blue screen and f11 does not work

    Hello

    Repair and reinstall the information:

    Try a startup repair and / or a system restore using a Microsoft Vista DVD (to borrow a)

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    You can contact your computer manufacturer and ask them to send you a set of recovery disks to reinstall.

    Most manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • blue screen with * STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000)

    HP Pavilion Elite PC m9150f

    Windows 7

    When I try to start my computer, I get a "Windows Error Recovery" screen and two choices of "Launch Startup Repair (recommended)" and "Start Windows normally".  No matter that the one I chose, I get a blue screen with "* STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000).  I can't go any further.  Then I turn off the computer.

    I restart the computer and choose F9-Diagnotics.  When it opens.  I see that the test of memory has failed and has an error code of "BIOME-1" and the suggestion of "Please contact HP Support".

    Before all that happens, I reinstalled an antivirus program that I have used for several years without any problems.

    So here I am.

    What should I do now?

    I would appreciate your help.

    Thank you.

    Chris

    Here is the user guide.  http://h10032.www1.HP.com/CTG/manual/c01152947.PDF

    Page 26 is the beginning of the "replacement memory.

  • I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

    I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

    After starting my Windows I got these message below

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.0.6002.2.2.0.256.6
    Locale ID: 2052

    More information about the problem:
    BCCode: a
    BCP1: 00000000
    BCP2: 00000002
    BCP3: 00000001
    BCP4: 82E9837B
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini041011-01.dmp
    C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
    C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt


    C:\Windows\Minidump\Mini041011-01.dmp

    View your dump using file:
    BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

  • whenever I try to install the new software on my computer goes to a blue screen and stop making

    Original title: HELP!

    whenever I try to install the new software on my computer goes to a blue screen and stop making

    Hello

    It takes a lot more information

    What operating system

    etc.

    read this

    How to ask a question

    http://support.Microsoft.com/kb/555375

    -What you trying to do?
    -Why are you trying to do?
    -Do you try already, why and what was the outcome of your actions?
    -What was the exact error message you received?
    -How long have you been experiencing this problem?
    -Have you searched the relevant forum/newsgroup archives?
    -Have you tried all the tools or KB articles or other resources?
    -Have you recently installed or uninstalled any hardware or software?
    -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

  • "blue screen error" stop 0x0000003e "appeare

    "blue screen error" stop 0x0000003e "appeare

    Bug Check 0x3E: MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED

    This indicates that the system has multiple processors, but they are asymmetric in relation to the other.

    Cause

    To be symmetric, all processors must be of the same type and level. This system contains processors of different types

    You use different processors on your system of MP.

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Cannot change anything in the action center error code and the blue screen and stops.

    I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

    OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

    Hey Chrisb,

    You did changes to the computer before the show?

    Step 1: I suggest to start the computer in safe mode and check if the problem persists.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.
  • What doesWhat is the cause of the msg blue screen error stop: 0 x 90909220, 0xBF94BAD1, 0 x 00000000, 0 x 00000000?

    Under XP SP3

    As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

    Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    What is your Internet browser and version?

    Your system's disks IDE or SATA drives?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

    Do you see that you think not you should see and when you see it?

    What do not you think that you should see?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Your system seems to start OK and then crash or didn't he start not at all?
    Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

    The next time your system crashes, provide more information on what you see.

    Here's a BSOD example showing information you provide:
    Send for the nose and the Red arrows (3 to 4 lines total).
    Send all * line STOP message since there are clues in the 4 parameters.
    If there is a name of the file listed in the STOP message, don't forget to include this information too.
    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
    Now provide more information about your system and data against more recent accidents.
    Click Start, run and enter in the box:
    Msinfo32
    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
    This will minimize back Q & A and eliminate guesswork.
    Download BlueScreenView here:
    Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
    If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
    BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.

    Sometimes BlueScreenView will involve XP files as being the cause of the accident (ntoskrl.exe, win32k.sys, hal.dll etc.) but they are probably not the real cause of the accident (BSV is doing the best he can).  You will need to either pick up some example crashes over and look through them, or find somewhere the XP files are not the 'cause' or you can upload your files to your SkyDrive crash dump and someone with the windows debugging tools can help take a look at them more closely.

    Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
    Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

    Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

    Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

    ==================================================
    Dump file: Mini102911 - 02.dmp
    Crash time: 2011-10-29 04:54:36
    Bug Check String: MANUALLY_INITIATED_CRASH
    Bug check code: 0x000000e2
    Parameter 1: 0x00000000
    Parameter 2: 0x00000000
    Parameter 3: 0x00000000
    Parameter 4: 0x00000000
    Caused by the driver: i8042prt.sys
    Caused by the address: i8042prt.sys + 27fb
    Description of the file: i8042 Port driver
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 5.1.2600.5512 (xpsp.080413 - 2108)
    Processor: 32-bit
    Plant address: ntoskrnl.exe + 22f43
    Stack address 1: i8042prt.sys + 27fb
    Stack address 2: i8042prt.sys + 2033
    Battery 3 address: ntoskrnl.exe + 6e715
    Computer name:
    Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
    Number of processors: 4
    Main version: 15
    Minor Version: 2600
    Size of the dump file: 94 208
    ==================================================

    Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
    While you wait, please follow these steps:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • blue screen error "STOP: 0 x 00000050 (0xA83B2000, 0 x 0, 00000000 00000001, 0x80537DEC).»

    Mr President, I have a problem on my desktop hp 1 week

    When I run Microsft security essential after some time a blue screen happen to my monitor with the following notification:

    PAGE_FAULT_IN_NONPAGED_AREA

    STOP: 0 X 00000050 (0XA83B2000, 0X00000000, 0X00000001, 0X80537DEC).

    ______________________________________________________________________________

    It happens after when I run microsoft security essential other time its ok...

    Help, please

    my pc configuration is

    Compaq HP SR13300IL

    Microsft windows professional sp3

    Pentium 4 cpu 2.93 ghz 0.99 GB of RAM

    & have 320 disc segate hard

    Hello anurydhkuksal.

    I had the chance to look over the landfills.

    It seems that the culprit in this one was HFSYS. SYS.

    This is part of an older program called Hide Folders.

    I recommend you to uninstall this program.

    Here is the debug information. My comments are in bold:

    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows XP Kernel Version 2600 (Service Pack 3) PUTS free x 86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    By: 2600.xpsp_sp3_gdr.101209 - 1647
    Computer name:
    Kernel base = 0x804d7000 PsLoadedModuleList = 0x805540c0
    The debugging session: 11:24:19.718 Sun 9 Oct 2011 (UTC - 05:00)
    System Uptime: 0 days 0:19:08.286
    Loading the kernel symbols
    .........
    Cannot load the image HFSYS. SYS, 0n2 error Win32
    WARNING: Unable to verify timestamp for HFSYS. SYS
    ERROR: Module load completed but symbols can not be loaded for HFSYS. SYS
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    Bugcheck 10000050, {a7fb7000, 1, 80537 dec, 0}

    Could not read the name of the problem driver
    Probably caused by: HFSYS. SYS (HFSYS + 1796)<-- debugger="" blames="">

    Follow-up: MachineOwner
    ---------

    KD >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    It must be protected by a probe.  In general, the address is simple bad or it
    pointing to freed memory.
    Arguments:
    Arg1: a7fb7000, memory referenced.
    Arg2: 00000001, value 0 = read operation, 1 = write operation.
    Arg3: dec 80537, if not zero, the address of the instruction that refers to bad memory
    address.
    Arg4: 00000000, (reserved)

    Debugging information:
    ------------------

    Could not read the name of the problem driver

    WRITE_ADDRESS: a7fb7000

    FAULTING_IP:
    NT! wcsncpy + 33
    80537 dec f3ab rep OSTC dword ptr are: [edi]

    MM_INTERNAL_CODE: 0

    CUSTOMER_CRASH_COUNT: 8

    DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

    BUGCHECK_STR: 0 X 50

    Nom_processus: MsMpEng.exe

    LAST_CONTROL_TRANSFER: from aa327796 to 80537 dec

    STACK_TEXT:
    a7fb628c aa327796 a7fb62ac

    85D 29008 00fe0003 nt! wcsncpy + 0 x 33

    00000000 00000000 00000000 a7fb67fc

    00000000 HFSYS + 0 X 1796<-- only="" 3rd="" party="" driver="" the ="">

    STACK_COMMAND: kb

    FOLLOWUP_IP:
    HFSYS + 1796
    aa327796?              ???

    SYMBOL_STACK_INDEX: 1

    SYMBOL_NAME: HFSYS + 1796

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: HFSYS

    NOM_IMAGE: HFSYS. SYS

    DEBUG_FLR_IMAGE_TIMESTAMP: 3dbbd77d

    FAILURE_BUCKET_ID: 0x50_HFSYS + 1796

    BUCKET_ID: 0x50_HFSYS + 1796

    Follow-up: MachineOwner
    ---------

    KD >! thread
    GetPointerFromAddress: unable to read from 80558ad4
    WIRE 85e759f8 Teb 0ba4.0728 Cid: 7ff8b000 Win32Thread: 00000000 PROCESSOR 0
    The IRP list:
    85D 29008: (0006, 01fc) flags: 00000800 Mdl: 00000000<-- can't="" read="" irp="" in="">
    Borrow not identity
    GetUlongFromAddress: cannot read 80558b6c
    Owner of process 0 Image:
    Joint process 85 c 42020 Image: MsMpEng.exe
    ffdf0000: cannot get shared data
    Wait start TickCount 73490
    County 24427 context switch
    ReadMemory error: could not get nt! KeMaximumIncrement value.
    Get_user_time 00:00:00.000
    KernelTime 00:00:00.000
    0x7c910250 Win32 start address
    Start 0x7c8106f9 address
    Stack Init a7fb7000 current a7fb67c4 a7fb7000 limit a7fb4000 Base dial 0
    Priority 8 BasePriority 8 PriorityDecrement 0 DecrementCount 16
    ChildEBP RetAddr Args to child
    a7fb628c aa327796 a7fb62ac 85D 29008 00fe0003 nt! wcsncpy + 0 x 33 (FPO: [Non - Fpo])
    WARNING: Information not available stack unwind. Sequence of images may be wrong.
    a7fb67fc 00000000 00000000 00000000 00000000 HFSYS + 0 x 1796
    KD > lmvm HFSYS<-- loaded="" module="" verbose="">
    start end module name
    aa326000 aa329da0 HFSYS T (no symbol)
    Loaded symbol image file: HFSYS. SYS
    Image path: HFSYS. SYS
    Image name: HFSYS. SYS
    Timestamp: Sun Sep 27 07:09:33 2002 (3DBBD77D)<-- driver="" is="" about="" 9="" years="">

    ==========================================

    ==========================================

    Let us know if you have any questions about it.

    Best regards

    Matthew_Ha

  • Blue screen error STOP: 0x0000000A

    STOP: 0x0000000A irql not less or equal bvluescreen 1055 whats up?

    What's new?

    Hello

    See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top two responses.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

    ==============================================

    References to Vista also apply to Windows 7.

    Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
    just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
    The video driver or something affecting it would be questionable.

    At the end of this message, I'll post a bluescreen generic and in the next convenience store
    How do to update the drivers and BIOS but also to check memory message.

    -----------------------------------

    BCCode: 0a 0x0000000A

    Cause

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

    The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    Solve the problem

    If a kernel debugger is available, get a stack trace.

    To resolve an error caused by the faulty device driver or service system, BIOS

    1. Restart your computer.
    2. Press F8 to character-based menu that displays the choice of operating system.
    3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

    To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

    1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
    2. Try disabling the cache in memory of the BIOS.
    3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
    4. Make sure that the latest Service Pack is installed.
    5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
    6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

    If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

    Comments

    Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

    BCCode: 0a 0x0000000A<-- read="">
    * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

    ==================================================================

    General troubleshooting BlueScreen to use with the methods above.

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • blue screen error stop 0 x 00000019

    When my friend starts windows 7 on his computer after the signature she gets a blue screen and the codes only that I'm able to catch during the dump process are 0 x 00000019 before restarting the computer, this computer is ony around the age of 2 months, anyone know or have any ideas as to why this is happening?

    Hello

    On a new computer it should certainly contact support from the manufacturer of the system for known issues and
    claim of possible guarantee as well as their forums (if any). It's to fix more they
    pretend that it is something that the user did as the cause.

    ====================================

    If you want to solve the problem.

    This is most likely caused by a stray driver, although the antivirus/antispyware/security programs and
    memory/hardware are all the real suspects. See my update driver and memory by following test methods
    Message.

    BCCode: 19 0 x 00000019<-- read="">
    http://www.faultwire.com/solutions-fatal_error/bad-pool-header-0x00000019-* 1040.html? = date order

    ===========================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista (also Windows 7) Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Help to fix the blue screen error: STOP: 0x0000007A

    Original title: I get the BSOD on my Dell Inspiron 14 stop information is at the bottom.  What means this dose-specific code and how can I solve this problem?

    STOP: 0x0000007A (0xFFFFFFFFC0000056, 0x0000000058DB3860, 0xFFFFF8A000E42A48, 0xFFFFF960001E082C) he begins again each time after it happens like nothing ever happened, but I don't want my computer any crash if there is an easy way to understand what it means and set it would be nice.

    Hello

    Here are some of the more general methods that could help solve the problems of use as
    necessary (same as in the link below).

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for