blue screen - only works in safe mode

Similar Questions

• touch screen only works in safe mode

  I have a P100 Hedy tablet pc and touch screen does not work after installation win 8. It worked when I had win 7 on it.

  I also realized that the touchscreen works perfectly in safe mode (limited touch, point 2, something something).
  Why is this work without failure, but not when I load windows normally mode?

  Hi Julie,.

  Thank you for keeping us posted.

  We are unable to find the drivers for the model you provided. You can contact the manufacturer of the Tablet for drivers.

  Please download the drivers and install them in compatibility mode.

  Please refer to my previous post on May 13^th 2013 for the step to install the drivers in compatibility mode.

  If please get back to us and let us know if this helps.

• Firefox crashes at startup, only works in safe mode

  Hello.
  As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

  That's what I've tried so far, but it did not work:

  Restored Firefox.
  
  Reinstalled Firefox and also delete my profiles.
  
  Hardware acceleration disabled.

  These are my recent incident reports

  bp-114dcdff-7b46-425b-8ec0-478102140218
  bp-464d26b6-4530-4230-8e4f-5000e2140218
  bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
  bp-6a0e5565-1f66-4606-8c29-8ac292140218

  Thanks in advance, I hope you can help me.

  Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

  There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

  Here are two reports of incidents on the problem:

  BP-a257ee60-b8d6-495c-82a3-605572140218

  BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

  Thanks for your help and sorry for my English.

  EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

• WiFi MiniPCI card only works in "Safe Mode with network.

  AR5001Xplus MiniPCI card only works in "Safe Mode with network" (windowsXP-Home-SP2 and all updates recent).
  In 'normal' mode, it freezes my laptop after a few seconds.

  Hello

  Why you don t give us more information about your problem? We don't know what unit you have? Is the original part of card or you have built at least?

  At the moment I can just recommend you to reinstall the unit with recovery media. If the problem persists, try to install the card separately with the right driver. Otherwise, you must change the WiFi card or test it with the other.

  Give us more information.

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• Mouse and keyboard only work in safe mode... why?

  Or work on restoring normal operation and all the images are blurred. Said one-stop two players work under ms - back! Someone help me?

  If it works in safe mode it looks like it's the drivers. because in safe mode, it uses only basic MICROSOFT DRIVERS... go in safe mode, go to the DEVICE MANAGER (right click on computer and click on MANAGE then click on allow or continue if prompted, and then click Device Manager).

  under the heading of the keyboard device, click on the '+' and then right click and uninstall all THE items in the CATEGORY of the KEYBOARD and click OK on all messages

  then

  under mouse/mice and other input devices , click on the '+' and then right click and uninstall all THE items in the CATEGORY of the mouse/mice and other input devices and click OK on all messages.

  Then

  Reboot and allow devices to relocate

• Graphics card only works in Safe Mode

  Just did a clean install of Windows 7 and when re - installing the latest drivers Nvidia drivers do not work. I have a Nvidia GTX570 finds ok computer. I can only run in safe mode with the base windows graphics drivers so think the card works ok? can someone help?

  Install and run the uninstall of the display driver, I remove all items from nvidia.

  Uninstall the display driver.  http://www.Guru3D.com/files-details/display-driver-uninstaller-download.html

  Restart the computer.

  Install the latest java.

  http://Java.com/en/

  Visit Nvidia Auto detect Graphics.

  http://www.nvidia.com/download/scan.aspx?lang=en-us

• computer only works in safe mode

  Happens to Windows Logo and crashes, does not work in safe mode have lost Admin VAC and can't do a restore
  point

  madmacca,
  We could use a little more information.

  What version of Windows and service pack level are you?
  Do you have an error message, and if yes what is it?
  Nothing changed prior to the show starting (hardware or software)?

  When you start in Safe Mode, a minimal boot and will see if this you start normally.
  Here is information on the clean boot: http://support.microsoft.com/kb/310353

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LCD monitor only works in safe mode

  I connected a new monitor and will work in safe mode. I tried to change all the settings in safe mode but nothing seems to work when I restart the computer in normal mode. Help, please

  I'd like to see if you can install any software that came with your monitor.

  There is another option to enter in Windows Vista, choose activation lower-resolution (640 X 480)... .or the VGA mode as it used to be called.

  Try to install the drivers in safe mode if it does not work.

  If these don't work, let me know the exact model you new monitor so I can see if I can find any known issues.

  Mark <> Microsoft Partner

• computer blocks only works in safe mode and error blue screen BCCode: 116

  specifications of the computer.
  Windows vista Home premium 32-bit
  Error Msg

  -stop enexpectedly

  Signature of the problem

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)

  Mini052711 - 01.dmp

  SysData. XML

  Version.txt

  See a temporary copy of these files

  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem

  BCCode: 116

  BCP1: CF 892 008

  BCP2: 90B 22036

  BCP3: 00000000

  BCP4: 00000002

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Information about the server: 2528169f-3730-4b08-b413-9ffae78c8aa8

  Hi Manju,

  Remember to make changes before this problem?

  If the computer works fine only in Safe Mode, then some present third party software on the computer may cause this problem.

  
  Method 1: activate the boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: you can follow the steps described in the article below, which addresses the problem of blue screen

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

• Blue screen on reboot. Safe mode does not work...

  When I try to start my computer, it displays a blue screen, no matter what I boot (hard disk, safemode, Recovery Manager). It still crashes and I get this message:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error message. Restart your computer. If this screen appears again. Follow these steps:

  Check to make sure any new hardware or software is installed correctly. If this is a new installation ask your hardware manufacturer or software of windows updates you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as the capture or the shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000C1F5 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000).

  I was using automatic updates.  Shut down the computer after the installation of updates and I have had this problem since.

  Hello

  You can try these fixes in XP, they could be the same and I have more a XP machine to test it on.

  XP experts:

  -Meets - even if this can help you to XP back here, it seems
  http://answers.Microsoft.com/en-us/Windows/ee318395.aspx

  Discussions at the Microsoft.public.windowsxp.general
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General&cat=en_us_0cc55ed7-e23e-4264-97e8-eb7d5a162b12&lang=en&CR=us

  Google search on the error in Windows XP
  http://www.Google.com/search?hl=en&q=Windows+XP+0x0000C1F5&LR=lang_en&AQ=f&OQ=&AQI
  Search the Knowledge Base Microsoft on error in Windows XP
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000C1F5&spid=1173&catalog=LCID%3D1033&1033comm=1&Res=20

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• the computer restarts on startup and then only works in safe mode

  I'm running out of options.

  I have a MSI all in one pc which runs on windows vista Basic. I turn on my computer and it will show my lock screen, but just before I can type my password, it restarts itself and give me different options of safe mode. I tried a lot of different solutions, but none of them seem to work. Can anyone help me, please.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you already know)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Why my laptop only works on safe mode?

  my phone does not allow me to use the normal settings, it only allows me to use the safe mode and the sound does not work and the screen is enlarged

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• WiFi only works in safe mode

  WiFi worked normally on my Mac Pro and then suddenly yesterday I received signal and an IP address but pages load. Other devices and computers work well with my wifi router. I can also surf the web very well when I boot in safe mode. However, when I restart my computer, then no wifi again. I can then go back into safe mode and get internet. I did no new software updates, installations or router configuration changes that may cause this problem from one day to the other. Anyone have any suggestions?

  Since then, I tried the following:

  -restart my router

  -renew the DHCP lease

  -flushed out DNS cache

  "- removed 4 files of./Library/preferences/SystemConfiguration/" then restarted computer

  -rebooted in safe mode

  -reset the SMC

  -turned off bluetooth

  -hidden "iTunes Helper" elements of opening under my user account. The only listed element.

  http://etrecheck.com/

• Disqus will not be open. Only works in safe mode

  I am running windows 7. Never had a problem with opening of Disqus on Cnn until today. Yesterday I updated avast, and no problem with disqus yesterday after the update. Today, the section of disqus on CNN opens at all in Firefox. It works fine in IE. I went through all the trouble shooting pages. The only way he opens disqus, is if I open Firefox in "safe" mode I followed the instructions and finally disabled 'everything', same avast, plugins, extensions, add-ons, etc. Even with everything turned off, including avast, it only opens disqus in safe mode. I consider my self pretty darn good on the computer, in fact, I'm the Go-to-Guy "in my circle of friends when someone computer crashes. However, I am out of options here. The only thing I have not tried is the Firefox "reset". I hesitate to do now, because by disabling all with no luck, I don't see a reset to help me.
  Thanks in advance to anyone who can help me with this.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.