Blue Screen showing STOP: 0x000000BE (0x02A3C121, 0x088914C90, 0x8640E0BA, 0x0000000B)

I have the above message showing on my father in an act Windows Vista PC and it keeps randomly crashing.  Tried some PC tune up tools but it had no effect.


Any ideas?
Lee

My pleasure Lee

Since a few years I worked on vista, but I can tell you of the unique DMP that it is a question of memory (probably a driver).  The underside of both tests will check the RAM and try to locate the guilty driver.


1 - Memtest.

* Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

* Boot from the CD and let it run at least 5 or 6 passes.

Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

Test the sticks individually and if you find a good, test it in all slots.

Any error is indicative of a memory problem.

If a well-known stick fails in a slot of motherboard, it's probably the slot.

http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html


2. Driver Verifier

Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

So, here is the procedure:
-Go to start and type "auditor" (without the quotes) and press enter
-Select 'Create a custom settings (for code developers)' and click 'Next '.
-Select "Select individual settings from the list complete" and click "Next".
-Select the entire document except for "Low resource Simulation" and click "next".
-Select "Select driver names from a list", then click "next".
Select all drivers that are NOT provided by Microsoft, and then click "Next".
-On the next page, select "Finish".

Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.

If you are unable to Windows because it crashes too early, try safe mode.
If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

Further reading
"http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

Tags: Windows

Similar Questions

  • Blue screen with stop: 0x000000BE (0xF7486350, 0 x 06958121, 0xF7A4140C, 0x0000000b) __iaStor.sys

    I can't start my computer. Windows Xp attempts to boot, then the screen goes blue. I tried to reboot in safe mode, start windows normally and know last good Configuration. I have not installed and recent but implemented programs to automatic update is enabled.

    Hello Dhonerjr,

    Thank you for your message.  There is an article that explains part of the troubleshooting steps to resolve this problem.  Please click HERE for troubleshooting steps.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

    I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

    After starting my Windows I got these message below

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.0.6002.2.2.0.256.6
    Locale ID: 2052

    More information about the problem:
    BCCode: a
    BCP1: 00000000
    BCP2: 00000002
    BCP3: 00000001
    BCP4: 82E9837B
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini041011-01.dmp
    C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
    C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt


    C:\Windows\Minidump\Mini041011-01.dmp

    View your dump using file:
    BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

  • Cannot change anything in the action center error code and the blue screen and stops.

    I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

    OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

    Hey Chrisb,

    You did changes to the computer before the show?

    Step 1: I suggest to start the computer in safe mode and check if the problem persists.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.
  • Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

    I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
    I have Windows XP SP2-teacher-pack. I have the original CD of this package.
    But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
    Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

    After reading your following suggession:
    Here are a few things to try:
    The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

    Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

    I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

    Thanks in advance for help
    What about nice Rajneesh

    Just one quick response for others...

    Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

    Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

    Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

    For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

    Have fun, and... Peace!

    Devvie

    ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

    CONARE nullius momenti videri fortasse missilibus careant
    ------
    All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

  • Blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    How to fix blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

    If you are overclocking reset all default before running these tests.
    In other words STOP!

    1 - Memtest.

    * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

    * Boot from the CD and let it run at least 5 or 6 passes.

    Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

    Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.

    If a well-known stick fails in a slot of motherboard, it's probably the slot.

    http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

    2. Driver Verifier

    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

    I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

    So, here is the procedure:
    -Go to start and type "auditor" (without the quotes) and press enter
    -Select 'Create a custom settings (for code developers)' and click 'Next '.
    -Select "Select individual settings from the list complete" and click "Next".
    -Select the entire document except for "Low resource Simulation" and click "next".
    -Select "Select driver names from a list", then click "next".
    Select all drivers that are NOT provided by Microsoft, and then click "Next".
    -On the next page, select "Finish".

    Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you are unable to Windows because it crashes too early, try safe mode.
    If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
    http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

    Further reading
    "http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

  • I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

    Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

    I'm not being updated hardware or software on my Dell Latitude D8380.

    I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

    I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

    Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

    Please can you help. Thank you, Sue Dixon

    Hello

    Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Let us know the status of the issue.

  • Blue screen with stop: 0 x 00000024 (0x84598f58, 0x84598c54, 0x001904aa, 0x8561df51)

    * Original title: I need help please

    I was given an old computer model of ky x n bc laws all im going to do is to type using office 2000... and it worked in food for 5 minutes now, I have a blue screen with stop: 0 x 00000024 (0x84598f58, 0x84598c54, 0x001904aa, 0x8561df51) in my research I found, it seems that I need a recovery disk for this computer did not come with a how can I do to get a... im also secretly hoping that it costs no stupid amounts of money since I'm on a fixed income... Thanks for your help guys o btw, I tried f8 it will o do now and then appears on the blue screen and f11 does not work

    Hello

    Repair and reinstall the information:

    Try a startup repair and / or a system restore using a Microsoft Vista DVD (to borrow a)

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    You can contact your computer manufacturer and ask them to send you a set of recovery disks to reinstall.

    Most manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • blue screen with * STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000)

    HP Pavilion Elite PC m9150f

    Windows 7

    When I try to start my computer, I get a "Windows Error Recovery" screen and two choices of "Launch Startup Repair (recommended)" and "Start Windows normally".  No matter that the one I chose, I get a blue screen with "* STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000).  I can't go any further.  Then I turn off the computer.

    I restart the computer and choose F9-Diagnotics.  When it opens.  I see that the test of memory has failed and has an error code of "BIOME-1" and the suggestion of "Please contact HP Support".

    Before all that happens, I reinstalled an antivirus program that I have used for several years without any problems.

    So here I am.

    What should I do now?

    I would appreciate your help.

    Thank you.

    Chris

    Here is the user guide.  http://h10032.www1.HP.com/CTG/manual/c01152947.PDF

    Page 26 is the beginning of the "replacement memory.

  • whenever I try to install the new software on my computer goes to a blue screen and stop making

    Original title: HELP!

    whenever I try to install the new software on my computer goes to a blue screen and stop making

    Hello

    It takes a lot more information

    What operating system

    etc.

    read this

    How to ask a question

    http://support.Microsoft.com/kb/555375

    -What you trying to do?
    -Why are you trying to do?
    -Do you try already, why and what was the outcome of your actions?
    -What was the exact error message you received?
    -How long have you been experiencing this problem?
    -Have you searched the relevant forum/newsgroup archives?
    -Have you tried all the tools or KB articles or other resources?
    -Have you recently installed or uninstalled any hardware or software?
    -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

  • "blue screen error" stop 0x0000003e "appeare

    "blue screen error" stop 0x0000003e "appeare

    Bug Check 0x3E: MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED

    This indicates that the system has multiple processors, but they are asymmetric in relation to the other.

    Cause

    To be symmetric, all processors must be of the same type and level. This system contains processors of different types

    You use different processors on your system of MP.

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

    How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

    If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

    Here's a suggestion on how to do a 'clean ': install
    [quote]
    For testing purposes, it is best to install Windows "clean".
    It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
    This procedure is for Windows 7, Vista is similar (but has 2 service packs)

    You will need your installation/recovery DVD (s) before you start.  Once you wipe the hard drive, there is no going back!

    1 back up all your data.
    It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

    NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

    2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

    3. use one of these free utilities to wipe the hard drive:
    DBAN ( http://www.dban.org/download )
    KillDisk ( http://www.killdisk.com/downloadfree.htm ).
    This will also remove the system recovery partitions - so the installation/restore DVD is essential!

    4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

    5 visit Windows Update and get all updates

    6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

    7 visit Windows Update and download the Service Pack 1 (normally under important updates).  Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

    8 visit Windows Update and get any other available updates

    9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

    If problems persist, then the problem is probably with your hardware.

    Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys.  2004/2005 is a problem, 2009,2010 is OK.  Updates are available on the Web from Asus site.

    Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys).  To update this driver immediately!
    [/ quote]

  • What doesWhat is the cause of the msg blue screen error stop: 0 x 90909220, 0xBF94BAD1, 0 x 00000000, 0 x 00000000?

    Under XP SP3

    As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

    Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    What is your Internet browser and version?

    Your system's disks IDE or SATA drives?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

    Do you see that you think not you should see and when you see it?

    What do not you think that you should see?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Your system seems to start OK and then crash or didn't he start not at all?
    Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

    The next time your system crashes, provide more information on what you see.

    Here's a BSOD example showing information you provide:
    Send for the nose and the Red arrows (3 to 4 lines total).
    Send all * line STOP message since there are clues in the 4 parameters.
    If there is a name of the file listed in the STOP message, don't forget to include this information too.
    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
    Now provide more information about your system and data against more recent accidents.
    Click Start, run and enter in the box:
    Msinfo32
    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
    This will minimize back Q & A and eliminate guesswork.
    Download BlueScreenView here:
    Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
    If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
    BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.

    Sometimes BlueScreenView will involve XP files as being the cause of the accident (ntoskrl.exe, win32k.sys, hal.dll etc.) but they are probably not the real cause of the accident (BSV is doing the best he can).  You will need to either pick up some example crashes over and look through them, or find somewhere the XP files are not the 'cause' or you can upload your files to your SkyDrive crash dump and someone with the windows debugging tools can help take a look at them more closely.

    Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
    Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

    Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

    Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

    ==================================================
    Dump file: Mini102911 - 02.dmp
    Crash time: 2011-10-29 04:54:36
    Bug Check String: MANUALLY_INITIATED_CRASH
    Bug check code: 0x000000e2
    Parameter 1: 0x00000000
    Parameter 2: 0x00000000
    Parameter 3: 0x00000000
    Parameter 4: 0x00000000
    Caused by the driver: i8042prt.sys
    Caused by the address: i8042prt.sys + 27fb
    Description of the file: i8042 Port driver
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 5.1.2600.5512 (xpsp.080413 - 2108)
    Processor: 32-bit
    Plant address: ntoskrnl.exe + 22f43
    Stack address 1: i8042prt.sys + 27fb
    Stack address 2: i8042prt.sys + 2033
    Battery 3 address: ntoskrnl.exe + 6e715
    Computer name:
    Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
    Number of processors: 4
    Main version: 15
    Minor Version: 2600
    Size of the dump file: 94 208
    ==================================================

    Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
    While you wait, please follow these steps:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • blue screen error: stop 0x0000007B...

    Please can someone help me with this technical problem in my computer. STOP: 0x0000007B (0xF78E9524, 0xC0000034, 0x00000000, 0x00000000). This information shows whenever I open my computer and I can't open it. I, ve tried safe mode, but even he ends with the blue screen with text and technical information is above. Any help will be appreciated ba please. Thank you very much.

    Basically the error means that the installation of Windows has lost access to the controller driver.

    If it is a newer computer with SATA drives go into BIOS and check the SATA settings, place the controller in IDE mode and see if the computer starts correctly.

    John

  • Blue Screen Mountable_Boot_Volume STOP: 0x000000ed

    Original title: Mountable_Boot_Volume

    When I turn on my computer it starts to boot and then goes to a screen that says sorry for the inconvenience that I can have installed hardware or software etc. or.

    I gives me some options safe mode safe mode with command prompt, start windows normally, etc.. Any option that I chose me back to reboot again
    When I use the f8 key to access the advanced options I chose the system failure enable which gives me the blue screen that says: I have a problem with the boot rack volume
    The screen shows technical information STOP: 0x000000ed (0x83794c08, 08C 0000006, 0 x 00000000, 0 x 00000000)
    This screen also said to send this information, how do I send it?
    Also in advance options me gives the possibility to insert the cd, but the computer will not read it and gives me the error 4
    The last problem I had before this major problem was trying to get microsoft security essentials works correctly, I don't have any errors on the essentials of security, but after that I update and try to run the program would freeze.  Say the updates needed to bring, if it's an allusion to anyone what I can do
    to fix my computer

    Hi tranquiltb,

    ·         Since when are you facing this problem?

    ·         You have made no change later?

    You can check if this article helps.

    When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

    For Microsoft Security Essentials, you can post your request here.

Maybe you are looking for