Blue screen-Stop 0x0000008E (0xC000001D, 0x8204D687, 0x91A8EBDC, 0x00000000)

Recently had failure of current, and restart, we received the error code: 0x0000008E (0xC000001D, 0x8204D687, 0x91A8EBDC, 0x00000000). The operating system is Windows Vista Home Premium. Any help would be appreciated.

Edit: There are some important documents and photos that would be essential to preserve.

Hello

Data recovery

1. remove the hard drive and it slave in another computer

2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

3. try Knoppix

http://www.Knopper.NET/Knoppix/index-en.html

BUT this method 3 depends on your hardware in the computer that failed

Tags: Windows

Similar Questions

  • Error blue screen: STOP: 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED

    original title: blue screen with the error: "STOP: 0x0000008E (0xC000001D, 0 x 82850572, 0x9E204038, 0x00000000)"»

    Hello everyone,

    It has been more than a week I tried to re - install my computer: ACER9802AWKMi after several months of support with blue screen apearing errors whenever there is more than one program open :-(
    So I started with a recovery disk, but the problem was still there.  The computer came with XP Home Edition and I got an upgrade to Vista (all original stuff) with all updates (SP1 and 2 and everything else updates)
    Now, every time I go on the internet: especially no problem, but if I want to play a game (online) full screen, after a few minutes:
    Yes: blue screen with messages such as
    STOP: 0X0000008E (0XC000001D, 0 X 82850572, 0X9E204038, 0X00000000)
    STOP: 0x0000007F (0x00000008, 0x8013F000, 0 x 00000000, 0 x 00000000) or
    PFN_LIST_CORRUPT or
    something with the memory of the BIOS (which I have to remove cache or mirror) witch I tried to do, but not found in the BIOS SetUp (when start PC press F2)

    Whenever I get another message :-(

    I tried with FixIt, fact CHKDSK - CHKDSK F + CHKDSK F R
    I have also run Everest to have all the necessary stuff... so if you need it...

    If anyone has a sollution, I would be very happy to hear it.

    TX much

    In the mean time brands more than 13,000,000 errors:(et toujours obtient plus élevé.)  Of course I'm not every minute in front of my screen (sometimes I work too: the job from 9 to 5, you know)

    Hi Sabine,.

    This means that the RAM is broken or damaged. If you receive error messages, you can stop the execution of memtest86 +.

    Ask someone who knew a little technical to open the laptop and check out how many RAM modules there. If it has a single module, buy a new RAM module.

    If she has more modules, remove other modules, so that you don't have 1 module of RAM left. Now run the test for each RAM module again (only install 1 module at the same time) to check if all are damaged or 1.

    If you have discovered how many RAM modules is broken, buy new RAM

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Satellite 2410-404: blue screen STOP: 0x0000008E TVALD. SYS

    Hello
    last night I tried the WinXP "verifier.exe" tool to check unverified in WinXP drivers.
    My system worked very well until this try. After the first reboot, the system load until the home screen where I choose my account (Administrator rights) to load my profile. After the boot process slows down upwards, only windows processes are shown in the lower right bar (icon of sound system, network) and after a while, there is a blue screen with the following information:

    STOP: 0X0000008E (0XC0000005, 0XF89A742C, 0XF3DFDB50, 0X00000000)
    TVALD. SYS - address F89A742C base at F89A7000, DateStamp 3b7caa6c

    and the system stops.

    Please help how to deal with this error, the tvald.sys is a Toshiba system file in the system32 directory.
    I have the Toshiba recovery cd, but I have half a month of accounting files that is not registered so I need urgently a fix where I do not format the hard drive.

    Thanks for any help
    Alex

    You are right;
    The TVALD. SYS seems to be a Toshiba ACPI-Based value added logical device driver that is required to run the stable notebook.
    It looks like these files has been has not signed with a certificate from a trusted windows source and therefore the tool of Windows XP "verifier.exe" locked or deleted. (I put t know exactly what verifier.exe)

    I put t know if you were able to solve this problem without using the Toshiba Recovery CD :(
    The TVALD. SYS seems to be stored in
    windows\ system32\ drivers\ tvald.sys c:\

    and in the registry here:
    HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-TVALD

    However, in my opinion the verifier.exe tool should be removed and the settings must be reset!
    In this case, you can use the XP System Restore tool!
    That's all I can suggest

  • Blue screen * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

    I have a Hewlett-Packard HP ProBook 4510 s 32-bit with Windows 7 Home Premium and a blue screen appears always * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

    Hello

    Check with the help of HP, their online documentation and drivers, diagnostics and ask
    in their forums about known issues with this model.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =======================================================

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ===============================================================

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Two main causes of these blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See the methods of update driver generic and verify the implementation of driver verifier in the next
    Message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

    • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    Make sure you have enough disk space.

    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • When you try to Watch youtube videos, get the blue screen error: 0x0000008E (0xE0000001, 0BA460925, 0xA8919820, 0x00000000)

    I can't view videos such as youtube without my computer locking with a blue screen and error message: 0x0000008E (0xE0000001, 0BA460925, 0xA8919820, 0x00000000) how correct this and what it means? I am running windows XP. Thank you

    Hello

    · You receive this error message only when you watch videos online?

    · Do you remember any changes made on the computer before the show?

    · What is the number and the model of the computer?

    · What is the service pack installed?

    Check the status of the card/video display adapter installed on your computer.

    a. click on start

    b. click Run, in the Run dialog box type devmgmt.msc

    (c) in the Device Manager window, look for the screen reader and expand the drive, double-click the sub element to check if an error message or error code is listed.

    You can also check out the link below: general troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E": http://support.microsoft.com/kb/945658

  • Blue screen - STOP: 0x0000008E

    I got a blue error screen that lists the following information:
    Problem: Blue screen
    6.0.6002.2.2.2.0.768.3 OS version
    Locale 1033 ID
    ICC code 1000008e
    BCP1 C0000005
    81FF03D4 BCP2
    BE0C2C5C BCP3
    BCP4 00000000
    Version of the OS 6-0-6002
    Service Pk 2
    768-1 product

    Files that describe the problem:
    C:\Windows\Minidump\Min.011410-01.dmp
    C:Users\Owner\AppData\Local\Temp\WER-123833-0.SysData.XML
    C:Users\Owner\AppData\Local\Temp\WER14F6.tmp.version.txt

    The message said I may not have sufficient disk space and disable BIO memory options and something to do with caching. My battery was insufficient in time, so not that of course that has nothing to do with it. My battery needs to be replaced as well, since it does she take his load for more than 30 minutes. In any case, I don't know what to do or who call for this problem. I run on Windows Vista Edition Home Premium. I've already fried a laptop after 1. 5 years, the current one is 2 years old. I'd appreciate the help. Thank you

    Hello

    Power problems can cause strange things, however if the system is connected to a/c which should not be a problem.

    Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
    View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
    in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
    a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
    Displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Error code: Stop: 0x0000008E (0xc000001D, 0xF0Fe6005, 0xFA018D9c, 0x00000000

    This is the error message that I receive on my Dell - any help?

    It can help to look at the files minidump against accidents with a debugger.

    Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

    The following link has information about the use of Windows Live SkyDrive:

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

    In addition, you do not necessarily have compress the minidump files, you can download one at a time.

  • STOP: 0X0000008E (0XC000001D, 0X806D1A89, 0X80549C38, 0X00000000)

    BSOD w/top of code and a reference to the error driver. Can someone decipher the codes and tell me what they mean? At least then I can get to the root (kit) of the problem.

    You can also go to run, type: CHECK

    Run the xps Driver Verifier. This link will help on how to use. http://support.Microsoft.com/kb/244617

  • Error code: __Stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) can anyone help please

    My laptop Acer gives me a blue screen on start, or crashes on startup.
    I just got an error code:
    Can stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) anyone help please

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
    You must identify which exception has been generated.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Blue screen... STOP: 0x0000008E (0xC0000005, 0xBF8B6C11, 0xA9538368, 0x00000000) win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

    I have a Dimension 3000 bought in 2005, upgraded to 2 GB of RAM.

    I recently implemented almost from scratch, because Opera program and profile would be repeatedly corrupted, making me lose the email. (This reappeared even after reinstall opera clean, do not use old messages or other profile files). Therefore, I restored a backup of the C: partition Ghost (there are others for my data and downloads) I did shortly after the purchase, after which I had installed only Ghost and two games (I uninstalled the games). I installed SP3 and ran Microsoft Update. I was trying to reinstall other programs that I use now. It's Rhapsody; one of my kids 'synchronize' a player MP3 Sansa Fuze with Rhapsody.

    A few days ago when closing Internet Explorer, I got a message that should be closed and I could send a report to Microsoft. It is also used to happen before, from time to time.

    Then, more recently, when I closed Rhapsody, I got a blue screen with a message that there was a problem. He said I could try to change some settings in the BIOS. I remember what happens before I restored the ghost of 2005 BU. I looked in the BIOS and not able to find the parameters referred to in (something like memory cache). I wish it were possible to print these messages on a blue screen. I didn't copy the entire message, but I write these references:

    STOP: 0X0000008E (0XC0000005, 0XBF8B6C11, 0XA9538368, 0X00000000)

    Win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

    This means almost nothing to me. I hope that someone on the forum knows what this means and can suggest what could be the problem.

    So far, I have not had more wrong with Opera, so there may be two distinct problems. OTOH, I reinstalled only Opera on 10/12/10; I can still have problems with it.

    Hello

    Here is more information on the bug 0x8E control: http://support.microsoft.com/kb/945658/

    The 0x8E KERNEL_MODE_EXCEPTION_NOT_HANDLED can be caused by a faulty service/driver, damaged hard drive or defective display card not enough space, or memory, Hardware/software incompatibility and third-party remote control software. So to get started:

    1. test your memory. Run Memtest you can download from http://www.memtest.org/#downiso. Download the ZIP file, extract the ISO and write on CD. Once written to CD, boot your PC with the CD and run Memtest. Allow the test to run by at least 3 passes or until it gives errors. If you have more than 1 memory module, run the test on each module separately. Try running Memtest from a cold - start unplug your PC for an hour to cool down, then immediately run memtest again when you next turn on the. This way memtest will run when the memory is cool and after the 3rd pass when the memory is hottest.

    2. update your display driver. Reference Dell seems to have highlighted 3 different models of Dimension 3000 and so there is 3 different Intel display drivers. See if you can find an updated driver on the Intel Web site. If you use a graphics add-on card try to find an updated driver from the manufacturer's website. If you have any trouble finding a driver let us know what brand and model of graphics card you have.

    3. update the Rhapsody software. (I think it's the software you using http://www.rhapsody.com/-software ?). If it's Rhapsody software I think it seems to integrate into your Web browser and it's perhaps why Opera and now IE are mistakes? You can uninstall Rhapsody for a while just to see if it is the reason for your BSOD.

    4. when the 0x8E BSOD is caused by win32k.sys, yours, is it then possible, it is caused by control software remote third. It can include programs such as VNC, PCAnywhere, etc. of Teamviewer, RAdmin.  If you use one of these programs, uninstall it and see if the PC stops mistakes.

    5 run a scan on your hard drive. You can check your hard disk for errors by going toStart ->Run -> type chkdsk c: /r -> clickOk . When asked if you want to force a sayNodisassembly. When asked to plan the audit at the next startup, Yes. Reboot your PC to allow running chkdsk.

    Alternatively, you can run a diagnostic on your hard drive. This by downloading the diagnostic program from your hard disk manufacturer. A list of manufacturers and their diagnostic tools can be found here: http://www.tacktech.com/display.cfm?ttid=287. Once more, download the ZIP file, extract the ISO and write to CD. A time written on CD, boot your PC with the CD and run the test Advanced/extended.

    Also make sure you have enough hard disk space. It is always recommended, if possible, to have at least 15% of your free hard disk capacity.

    6. Finally, take a look in your event viewer when the BSOD for possible errors. You want to look especially in the system and Application logs (and maybe Internet Explorer connects). You can run Event Viewer by going toStart ->Run -> type eventvwr.msc -> pressOk -> event viewer screen opens. If there are errors listed in one of the newspapers type them in your next post if you are not right.

    Reading your post I see 3 specific issues, that you might want to focus:

    -The memory you added (run Memtest) and hard drive (run Chkdsk)

    -The Rhapsody program - try to update or uninstall.

    -The software was initially corrupted until you make the first image after the purchase. So you just ghost the problem on.

    I hope this helps. Good luck.

  • Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)

    Hello

    This is my first post, please have mercy,
    I have a BSD at startup and this is the code that continues to show upward.  System Restore (from system repair and also safe mode) has not solved the teething problems.
    Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)
    I think the code means some sort of failure hardware, is anyway to deduce which device has failed in assessing these codes?
    Please let me know if I'm on the wrong track with a hardware failure, I appreciate all the advice.
    Thank you

    Stop 0 x 124 is a hardware error

    If you are overclocking try to reset your settings to standard processor and see if that helps.

    If you keep getting the BSOD here are things more than you may want.

    This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

    Stop 0 x 124 - what it means and what to try
    Synopsis:

    A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.

    Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

    Generic troubleshooting ' Stop 0 x 124 ":

    (1) ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

    (2) make sure that the machine is sufficiently cooled.
    If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

    3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
    It is best to run the latest drivers anyway.

    (4) update of the BIOS of the motherboard according to the manufacturer's instructions.
    Their website should provide detailed instructions on the brand and model-specific procedure.

    (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
    At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

    (6) attempt (stress) test these hardware components that can be put to the test artificially.
    The most obvious examples are the RAM and HDD (s).
    For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
    For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
    Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

    (7) as the last troubleshooting no invasive steps, perform a reinstallation of Windows 'vanilla': just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
    Who stops working mitigate the problem of the 0 x 124, jump to the next step.
    If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
    Smash back, obviously the latest addition of software may be somehow connected to the root cause.
    If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
    Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

    (8) clean and carefully remove the dust inside the machine.
    Reinstall all memory modules and connectors.
    Use a can of compressed air to clean the RAM DIMM supports as much as possible.

    (9) if all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
    Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

    If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  • Blue screen STOP: 0x0000005C (0x0000010B, 0x00000001, 0x00000000, 0x00000000)

    WHEN I TRY TO INSTALL WIN 7 I GOT THIS HELP PLEASE
    Blue screen STOP: 0x0000005C (0x0000010B, 0x00000001, 0x00000000, 0x00000000)

    DN

    If you cannot start in safe mode and can not boot from the dvd, your options are extremely limited.  The fact that you can boot from Ubuntu suggests that something is wrong with e OS not material.

  • STOP: 0x0000008E (0xC0000005, 0xBF9568C8, 0xA6864C00, 0x00000000) win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633

    Hi, I get a blue screen frequently with the below error message.
    "Technical information:
    A problem has been detected and windows has shut down to prevent damage to your computer.

    STOP: 0X0000008E (0XC0000005, 0XBF9568C8, 0XA6864C00, 0X00000000)
    Win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633

    Beginning physical memory dump.
    Complete physical memory dump.
    For more assistance, contact your system administrator or technical support.  "
    I am using Packard bell Easynote MX45.
    XP Home edition Version 2002
    SP3
    Inter (R) CPU [email protected] GHz.
    3 GB Ram
    could someone help me fix it please.

    N

    You are better able to tell us if the problem is resolved.  Continue to run Malwarebytes about once a week.  If the BSOD ceased and MBAM does not show any other infection, you're probably good.

  • STOP: 0X0000008E (0XC0000005, 0X805662D1, 0XB38CDA04, 0X00000000)

    Tonight, my computer shuts down with a blue screen with a message saying that there was a problem with Windows, more this stop message...

    STOP: 0X0000008E (0XC0000005, 0X805662D1, 0XB38CDA04, 0X00000000)

    I have managed to restart in Mode safe for this post, but am not all that computer warned to manage a technical difficulty.   Is there a simple solution that I can use for this problem, or is a trip to my computer that required doctor?

    I have not loaded new software in the past few days and have now uninstalled the latest program installed, just in case.

    When I tried to send an error report, it wouldn't send it due to a problem.

    Any ideas?

    Thanks in advance,

    Andrea

    It can help to look at the files minidump against accidents with a debugger.

    Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

    The following link has information about the use of Windows Live SkyDrive:

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

    In addition, you do not necessarily have compress the minidump files, you can download one at a time.

  • Stop: 0x0000008E (0xC0000005, 0x805678A0, 0xEDE28CA8, 0x00000000)

    I was browsing the internet and nowhere a blue screen appeared in front of me and this displays exactly:

    Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check manufacturer updates the driver. Try changing video cards.

    Check with the hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

    Stop: 0x0000008E (0xC0000005, 0x805678A0, 0xEDE28CA8, 0x00000000)

    Followed by the physical memory dump. Now at this point, I don't know what to do or think. I don't know what this means, but if someone could enlighten me and walking I would be grateful. Where can I find and locate the devices or equipment having problems?

    Hello

    Follow the steps in the link below and check if you are able to solve: general troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E": http://support.microsoft.com/kb/945658

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for