Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

Similar Questions

• Blue error screen that says windows has been shut down to avoid damage.

  Help, please. We have an office that works under windows xp and we receive a blue screen error message. I need help running system restore because it does not run windows if it keep windows shut down and leaving me with a blue screen error message.

  We need to know what the Blue error screen and if it referred to specific files and/or numbers. Also, please include a description of your computer and its recent history.

  http://www.Aumha.org/win5/kbestop.htm - Stop errors

  MS - MVP - Elephant Boy computers - don't panic!

• Has anyone found the solution to the "blue screen" that States windows has been shut down to protect your computer?

  I followed the directions when invited to press F8 but nothing not done, I find myself just to return to the 'blue '.

  I don't have add new hardware before that happened.

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• Windows Vista Upgrade shut down my computer at 03:00 and 7 hours disappeared

  After working on an Excel 2003 worksheet for seven hours on my computer (Windows Vista) most recent. A box suddenely appears asking if I wanted to save the spreadsheet I was working on that. Just as I clicked on save the computer automatically stop apparently down to install the updates, it had downloaded earlier (every day at 03:00 I see). My spreadsheet now appears as it did seven hours before. Is there a way to recover my work? Left on file temp perhaps, hidden away somewhere.

  I can't believe this kind of programmed computer crash is the parameter defaoult for Windows Vista upgrades, but it seems that to be this way.

  For future use, in addition to change the settings for upgrade by default to ask before downloading anything, as I do, is it possible (as it was years ago) to set up a recording every few minutes in Office 2003 automatic? If so, how should I do that.

  Hi ttam24,

  Thanks for posting answers.microsoft.com

  If you wish, you can set your updates to install only if you are recommending.

  Here are the steps;

  1. Open Windows Update (click on the Start button, click all programsand then click Windows Update).

  2. Select change settings and choose how you want Windows to install updates.

  For Microsoft Office you can post your question on the forum of Microsoft Office.

  Here is the link;

  http://www.Microsoft.com/Office/Community/en-us/default.mspx

  Thanks for posting answers.microsoft.com

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP crashes and freezes. I receive Stop errors that say I can't restore the computer.

  I have a Windows xp that fails and frequently freezes when I restart my computer, it says it was a stop error that I can not restore the computer because its been there for months and I don't know when to return to I'm pretty certain that it was a virus, but whenever I go to scan the computer , it crashes can anyone help me with this problem?
  original title: help with freezes and freezes

  Hello
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer
  It provides detailed instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• KB915597 cause windows vista to freeze

  KB915597 for Windows Defender update causes Windows Vista to freeze.  At all times, I have to restart my computer for this reason.  And I can't uninstall Windows Defender because it is now integrated into Windows Vista.  In addition, I can not uninstall the update.  If ever I have to reinstall windows again and uncheck automatic updates, so I can make sure that this update is downloaded or simply live with the question until Microsoft fixes it.  Microsoft has released a fix for this error yet?  There is nothing wrong with my laptop because I just erased the hard drive and reinstalled vista.  I actually discovered this by accident because I reinstalled my operating system before but this freeze happening started and I thought it was a problem of Dell Update.

  http://www.PCWorld.com/article/226739/remove_windows_defender_as_long_as_windows_is_defended.html

• I start up it will show Windows Vista family premium down then in the middle of the screen will see the Please wait

  I have an Aspire X 3200 desktop PC. And I also have Windows Vista Home premium. When I boot it it will show that Windows Vista family premium down then in the middle of the screen will show it please wait... but it won't load at all. It will do nothing and just freeze like that all the time. Like now, I have to use my laptop able to do anything. I hope I can get help because I would like to use my desktop instead of laptop.

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Step 1:

  Start in safe mode and check if the problem persists there.

  How to start Windows vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in safe mode, and then put the computer in a clean boot state and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Startup Repair tool and check if it helps.

  Startup Repair: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  If method 1 and method 2 has not helped, then perform the system restore from the recovery system to a restore point option when the computer was working fine.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope the information is useful.

• error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  Hi lisafuller,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is the serial number and model of the printer?

  4. what happens when you try to access that Windows update and Control Panel?

  5. do you have security software installed on the computer?

   

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Method 2

  If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Due to Windows update run the Windows Update troubleshooting, check if it helps.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Also check if you can access control panel from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• I am installing a photography software, but I got a message error that says "windows version Basic 3.0.0.0must be installed in the Global Assembly Cache first".

  Error windows version Basic 3.0.0.0must be first installed in the Global Assembly Cache

  I am installing a photography software, but I got a message error that says "windows version Basic 3.0.0.0must be installed in the Global Assembly Cache first". Help someone!

  Try to download and install the .NET Framework directly from Microsoft.  If you have already installed a version and get unsuccessfully with the update - you may want to uninstall the installed versions and the installation later.

• Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

  Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• During the installation process of 6 of Lightroom, I get a box that says: Windows Vista not supported.  I have Windows 7 with Service Pak1. I meet all the other requirements listed.

  During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'.  I have Windows 7 with Service Pak 1.  I meet all the other requirements listed.  Any ideas?

  Hi Chuck,

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410