Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

Try recovery Mode

Connect your device to your computer and open iTunes.

When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

Keep now until see you the recovery mode screen and wait that he eat.

Restore as New first, then restore sauvegardΘ if you wish.

https://support.Apple.com/en-us/HT201263

Tags: iPad

Similar Questions

  • Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

    Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

    Hi, I was wondering if I need different software or?   Tent for upgrade achieve performance more than one old computer.   When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added.   3.6 GHz was also used in the 650's.  Just by looking at the cpu they look the same to me.  Any ideas is better than what I have now.   Dell number is 4QXB451

    This isn't the site for these answers... Try intel.com/support/cpu

    Youre pc requirments are based on the chipset boards, chips intel only run with

    the default CPU.

  • Satellite P200D-12f PSPBQE - blue screen when waking up from sleep

    Hello again!

    I feel blue screen problems when I close my laptop and open it again (while he wakes up).
    It says something about Ati blah blah.

    I find that very annoying reseting every time the PC cuz he went to sleep... any1 has / had similar problems?

    What can I do about it? I had b4 of win xp on my laptop (toshiba don't support even xp for this model) and it worked perfectly, even not a problem... and now with win 7 I have millions of problems and win7 is supported!

    > I feel some problems blue screen when I close my laptop and open it again (while he wakes up).
    > It says something about Ati blah blah.

    Blabla ATI means that the BSOD is related to the ATI graphics card chip or graphics card installed driver.

    If Win XP worked perfectly, then the problem must be caused by software installed. Maybe the graphics driver...

    I recommend the update driver graphics card and if necessary, update the BIOS.

  • Get the blue screen when you create a new message or the response message in OWA Exchange 2007

    Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

    Hello

    I suggest you post the question in the forums and check them off below if it helps:

    http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

    It will be useful.

  • Blue screen when you unplug the power of the computer dell laptop XP

    I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

    Hello suncoastsrq,

    Usually, when we see problems during shutdown, the cause is something that loads at startup.

    To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

    In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

    You can download the dump Auggy's previous suggestion?

    Let us know.

    Best regards

    Matthew_Ha

  • IM in safe mode because that's the only way to get into my computer it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?

    Hello I'm in safe mode because it's the only way to get to my desk, it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?

    Hello

    Do a restore of the system using the same safe as you would in Normal Mode.

    http://bertk.MVPs.org/html/restoresysv.html

    http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php

    See you soon.

  • Get a blue screen when loging to AOL. How can I fix?

    Original title:

    Get a blue screen when loging to AOL. How can I fix?

    blue screen when I try to open aol why is what is happening, that it only happens when I try to open aol

    Internet explore is fine

    Hello

    1. did you of recent changes to the system before the show?

    2. do you get an error message?

    3. do you have security software installed on your system?

    Method 1:

    Follow the link below, start in safe mode with network and check if the problem persists.

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    If the issue is fixed in SafeMode with networking, I suggest you perform a clean boot and check if it helps.

    Method 2: Perform a clean boot.

    To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

    http://support.Microsoft.com/kb/929135

    Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

    Method 3:

    Follow the link below, check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7   (Applies to Windows Vista)

    In addition, check out the link below and check if it helps.

    http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=223529

    Let us know if it helps.

  • I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

    I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

    After starting my Windows I got these message below

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.0.6002.2.2.0.256.6
    Locale ID: 2052

    More information about the problem:
    BCCode: a
    BCP1: 00000000
    BCP2: 00000002
    BCP3: 00000001
    BCP4: 82E9837B
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini041011-01.dmp
    C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
    C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt


    C:\Windows\Minidump\Mini041011-01.dmp

    View your dump using file:
    BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

  • Why my computer is being a "blue screen" when not in use (can be started Windows 7 very easy) why the blue screen?

    How to stop the computer to go to "blue screen" when not in use. In other words, how can we not shut down the computer for a ~ 10 hours?

    Arthur

    Please keep all your messages on the same topic in the same thread / conversation.

    Click on the following link to access your profile

    http://answers.Microsoft.com/en-us/profile/798d7b71-764c-E011-8dfc-68b599b31bf5

    Click Edit profile and check the box in front of notification by e-mail.

    A suggestion if you are using Internet Explorer 9, 10 or 11.

    Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.

  • Windows 7 went blue screen when the sleep mode is activated

    Hi, it happened that Windows 7 X 64 went blue screen, when my PC has been set to the standby mode. I received the following from the Windows Event Viewer:

    Log name: System
    Source: Microsoft-Windows-WER-SystemErrorReporting
    Date: 11/03/2014-17:39:30
    Event ID: 1001
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: my PC
    Description:
    The computer was restarted after a bugcheck.  The bugcheck was: 0x000000d1 (0 x 0000000000000005, 0 x 0000000000000008, 0 x 0000000000000000, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 110314-22510-01.
    The event XML:

     
       
        1001
        0
        2
        0
        0
        0 x 80000000000000
       
        17265
       
       
        System
        My - PC
       
     

     
        0x000000D1 (0 x 0000000000000005, 0 x 0000000000000008, 0 x 0000000000000000, 0 x 0000000000000000)
        C:\Windows\MEMORY. DMP
        110314-22510-01
     

    Dweng

    This phenomenon was related to mv91xx.sys magni Windows Driver of Marvell Semiconductor, Inc.  Yours is 4 years and more.  I remove the driver and install the latest driver available.

  • LifeCam is at the origin of the problems of "Blue screen" when you try to close?

    I get a blue screen when you try to stop, we have identified the "Lifecam can be the cause of the problem?

    Hello

    Thanks for posting your query in the Microsoft Community Forums.

    According to the description of the problem, I understand that you get Blue Screen of Death, when you use Lifecam on Windows 7 computer.

    We're here to help and guide you in the right direction.

    I suggest you to consult the help article and check if it helps.

    Method 1

    I suggest you update drivers lifecam and check if this may help,

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

    Method 2

    Visit the link mentioned for more information below.

    Resolve stop (blue screen) error in Windows 7

    Note: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

    Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

    Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.

    It will be useful.

    Let us know if you encounter problems under Windows in the future. We will be happy to help you.

  • blue screen when I try to develop my raw photos

    I downloaded the trial of lightroom version, and my raw photos look like blue screen when I try to develop. I can view them in the library, but not develop... I assume this has something to do with camera raw, but I have no idea how to solve. If anyone can help?

    I'll tell you the information that I found on the web:

    -In the list of supported cameras, it says I need - like version minimum - 5.4 of Camera Raw plugin and at least 2.4 version of lightroom.

    - And system information that appears in the trial version of lightroom is:

    Version of Lightroom: CC 2015.4 [1060496]

    License: Trial

    Operating system: Windows 10

    Version: 10.0

    Application architecture: x 64

    System architecture: x 64

    Number of logical CPUs: 4

    Processor speed: 2.5 GHz

    Built-in memory: 8097,1 MB

    Real memory for Lightroom: 8097,1 MB

    Real memory used by Lightroom: 658,2 MB (8.1%)

    Virtual memory used by Lightroom: 2411,3 MB

    Memory cache size: 3.5 MB

    Maximum thread count used by Camera Raw: 4

    Camera Raw SIMD optimization: SSE2, AVX, AVX2

    System DPI setting: 144 DPI (high DPI mode)

    Composition of the Bureau enabled: Yes

    Exhibition: 1) 1920 x 1080

    Entry types: Multitouch: Yes, built-in touchscreen: Yes, built-in pen: Yes, touch external: no, external pen: no keyboard: Yes

    Graphic processor News:

    Intel(r) HD Graphics 520

    Check the supported OpenGL: past

    Vendor: Intel

    Version: 3.3.0 - Build 10.18.15.4279

    Renderer: Intel(r) HD Graphics 520

    LanguageVersion: 3.30 - Build 10.18.15.4279

    The application folder: C:\Program Files\Adobe\Adobe Lightroom

    Library path: C:\Users\Celina\Pictures\Lightroom\Lightroom Catalog.lrcat

    Settings folder: C:\Users\Celina\AppData\Roaming\Adobe\Lightroom

    Plugins installed:

    (1) home canon Plugin

    (2) Facebook

    (3) Flickr

    (4) attachment Plugin Leica

    (5) attachment Plugin Nikon

    Config.LUA flags: None

    Map #1: Vendor: 8086

    Feature: 1916

    Subsystem: 804e103c

    Revision: 7

    Video memory: 128

    Map #2: Seller: 1414

    Device: 8 c

    Subsystem: 0

    Revision: 0

    Video memory: 0

    AudioDeviceIOBlockSize: 1024

    AudioDeviceName: Speakers (Conexant HD SmartAudio)

    AudioDeviceNumberOfChannels: 2

    AudioDeviceSampleRate: 44100

    Build: LR5x102

    Direct2DEnabled: false

    GPUDevice: not available

    OGLEnabled: true

    In Lightroom, try Edit > Preferences. On the performance tab, uncheck the box use Graphics Processor.

    See also 6 Lightroom displays a blue screen with a white X through it in the module development for all my photos

  • Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

    Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

    IMG_0121 (1).JPG

    Try to edit > Preferences > Performance and uncheck "use graphics processor.

  • Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

    Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • 0 x 000000 x 20 blue screen when running Netflix instant movies.

    When running Netflix instant movies, I got a blue screen with stop 0 error message 00000020 x. I think that Microsoft Silverlight (download again and I have removed him) is the problem. Anyone experienced this? This happened while watching a TV show produced BBC (immediate download could be the problem too, I had looked at a night at the movies before without any problem.) I am running an Inspiron 6000 Windows XP

    Information about your system seems good.

    Notice in the video section, the 'not available' items.  This means that XP is not get it for some reason any.

    Your report ASB is a bit biased (does not resemble my example, but that's OK).   Usually, I doubt the implications of oriented XP files and that you have some Intel video driver oriented files listed.

    Go to the Dell page for your system and get the latest video drivers for Intel (r) video 915GM and then upgrade your system or download the drivers and reinstall them right anyway to make sure they are right.  Keep track of this thread, and what you send as a picture 'before' the situation of the video driver.

    http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&SystemID=INS_PNT_6000&OS=WW1&OSL=en

    I looked on the Intel page to see what that drivers that they have and they have only Windows 7 drivers (for your video chip).

    I'll post the instructions for to make you a bootable CD from the Console of the Recovery XP (no XP media required) and you can put it with your CD for another day.

    Your S.M.A.R.T. errors seem dark, but could be drivers.  If some things said S.M.A.R.T. failure is eminent, I would tend to believe.

    If this system is to give you a few BSOD, you can run the view blue screen on that one too and maybe get more information.  VSO can help you to get more information and to search for a model in the BSOD reports.

    I don't know of a way to try to bypass these types of errors and would start to find how to replace the suspect disk and then turn the suspect disk in a slave drive, keeping in mind that it will probably fail completely a day (do not let it be a surprise!).

    You can learn more about S.M.A.R.T here:

    http://en.Wikipedia.org/wiki/S.M.A.R.T.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Maybe you are looking for

  • Re: What position the caddy a Satellite Pro 6100 use?

    I recently acquired one of the old machines out there I have an I was wondering where can I get the internal carriages of?Second, this model uses a hard drive spindle adapter? Thanks in advance!

  • asynchronous after export with fcp 5.1.4

    Hello I use a mac with OS 10.4.11 and fcp 5.1.4. After exporting a sequence HDV (1080i) - mpeg4 or H264 codec - I get asynchronous results. This does not work with SD material. Can anyone help? Rolf

  • NVIDIA GTX 970 problems

    So I got a nvidia GTX 970 as a gift from my father and I had a HP ENVY 1420 T desktop computer. Can someone tell me what Power suply I need?

  • How to add elements to an array without crushing it?

    probably is can a repeated question, anyone tell how to add a new element to a table at the following location without deleting the other?

  • Multimedia keys of LED does not

    I tried to click on my media keys of LED, but it does not work... supposedly, when I click on my movies main power media will come out but now it won't... I try to search in google on how to configure the multimedia keys LED... He told me to press th