Blue screen when you log in windows server 2008 r2

Similar Questions

• LifeCam is at the origin of the problems of "Blue screen" when you try to close?

  I get a blue screen when you try to stop, we have identified the "Lifecam can be the cause of the problem?

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, I understand that you get Blue Screen of Death, when you use Lifecam on Windows 7 computer.

  We're here to help and guide you in the right direction.

  I suggest you to consult the help article and check if it helps.

  Method 1

  I suggest you update drivers lifecam and check if this may help,

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

  Method 2

  Visit the link mentioned for more information below.

  Resolve stop (blue screen) error in Windows 7

  Note: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.

  It will be useful.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit

  I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit. Here's the print for the activation screen. Your help is most appreciated. Thank you

  Hello Mika Wong,

  The question you have posted is related to Windows Server 2008 and would be better suited on the TechNet support forum. I suggest post you the question on the TechNet support forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Blue screen when you unplug the power of the computer dell laptop XP

  I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

  Hello suncoastsrq,

  Usually, when we see problems during shutdown, the cause is something that loads at startup.

  To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

  You can download the dump Auggy's previous suggestion?

  Let us know.

  Best regards

  Matthew_Ha

• Printer busy or error; When you work on Windows Server

  I'm working on a persistant problem with a specific printer where I work. A bit of history: first of all, this printer is used by users on WYSE thin clients connecting to a Windows Server 2008 R2 virtual via a RDP session, however, some users connect using Windows 7 Professional. It is a network printer on our corporate domain installed as a local printer on a print server, as well as a local printer on the RDP server in use by the users of the thin client. Now the printer works perfectly for print test pages, Word Documents, etc. However, the problem arises when my users need to print PDF documents, for which they mainly use Adobe Acrobat 2011, although some also use the latest version of the reader (we update player generally that the new versions are available). When trying to print, the print queue will say coil (page 1/2/3, etc.), and then it will immediately change state of printer busy or error. When this happens, until the job is canceled, no other jobs will process, regardless of the type of document. And to further complicate things, one of the main users of this printer says that's not yet each PDF, some and it doesn't seem to be a constant difference between those who does not print and those who will be. The printer in question is a Xerox Workcentre 7345, and I tried to install the latest drivers, PS versions both PCL6 and attempted to use the driver for the Fiery controller, all giving the same result. I installed the printer as a shared printer on the network on the print server, and I installed it locally on the RDP server. Both lead to the same "occupied or printer error. I also tried bypassing the spooler and print the document as an image, both of the separately and with the two parameters defined. I am at a loss, and my users can use is more reliable for this printer to print PDFS... I would like some suggestions on what to do at this point. Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• ESXi 3.5 and when trying to install windows server 2008

  I installed ESXi 3.5 on my server and successfully created a first virtual computer on which I am trying to install Windows server 2008 standard. I use VMware Infrastructure Client 2.5 from a Vista machine to access my virtual machine console.

  Installation of Windows server is an ISO file located in the root directory of the ESX Server data store. Everything went well with the installation until one last server restart showed a screen stating "the password must be changed before logging on the first time' by clicking on 'OK' present a login for 'Administrator' screen, asking me to enter a password for the 'new' and 'Confirm password '.

  Any attempt to enter a new password results (up to 14 characters, mixture letter & number) in a message "unable to update the password, the value provided for the new password does not meet the requirements of length, complexity or the history of the area.

  As far as I know, I'm not usig a specific domain, have never been able to access Windows server 2008 to create an admin account. I don't know how to solve this problem. I am new to VMWare and Windows server 2008.

  Any suggestion to move forward and allow me to have access to the server via the console?

  Thanks in advance for your help, Claude

  This isn't really a problem with VMware, but more of a problem of Windows 2008 password complexity requirements.

  The account that she is not asking that you must change the password is the local administrator account.

  And you have tried in upper case, lower case, numbers and special characters?  Something like Win2008!@#$ maybe?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

• When installing ha6 on windows server 2008 R2 compatibility issue

  Hi, I want to install Virtual Studio 6 on windows server 2008 R2 (to run our legacy code). I encountered the problem of compatibility: "virtual studio has a compatibility issue with this version of windows.

  I tried the steps below:
  1. right click on "setup.exe" and select "Run as Administrator"
  2. run in compatibility mode, such as windows XP sp2.
  It does not, someone who can help on this? Thank you!

  Hi Weihe,

  The question you have posted is related to the Virtual Studio 6 installation on windows server 2008 R2 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

  Hello
  When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
  When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

  At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

  Hello

  Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

  However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

  Check it out!

• Blue screen when you perform the search for live TV in Windows Media Center on the new Lenovo A700

  I just got my new Lenovo IdeaCenter A700 yesterday and have been busy setting up.  The computer is equipped with a built-in TV Tuner and I tried to put in place the TV on it so I could watch TV on my computer.  I have RCN for cable and a cable TV that gets first plugged into the decoder and then I plug the cable to the TV - so I just plugged this cable on my computer instead of the TV.

  I used the following Web site to set up using Windows Media Center - http://www.howtogeek.com/howto/9166/learning-windows-7-setup-live-tv-in-windows-media-center/.  After that I put in my zip code he sought the power of the signal or something and then I got a blue screen.  To restart the computer the information below has been MS. error message This happened to me twice.

  Anyone know how to fix this? Or otherwise, I just want to use my computer to watch TV on, and if I can do this other method other than Windows Media Center free I am happy to do.

  Please let me know if you need more information.

  ************

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 4A
  BCP1: 0000000076E5FF2A
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF8800AADECA0
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\102110-15849-01.dmp
  C:\Users\fennis\AppData\Local\Temp\WER-36941-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  This seems to be resolved now... it was maybe an update of windows, like when I rebooted my machine it updated automatically and after that he worked all of a sudden!

  Anyway, now it shows a black screen and no sound for all channels, but that is a different problem... and I'll look in to that.

  Thanks for your help.

• Re: Windows Update KB kb961371 causes blue screen when you try to connect with BT

  Just thought I'd share what he had me flumoxed for awhile.

  I found that Windows Update has published around July 16, 2009 cause BT crash and Wlindows to go back to a blue screen.

  KB961371 is installed automatically by Windows Update If you have set it to do.

  Unistalling it end the Bluescreens.

  BT Stack Version 6.40.00 (T)

  Windows Vista, but can affect other operating systems

  Update details

  http://support.Microsoft.com/kb/961371

  Ian

  Hey Ian, thanks a lot for this info.
  I'll test it on my machine.

• Blue screen when you install Windows XP on Touchsmart tx2z with pre-installed Windows 7

  I use the Tablet for a month or two, and I found Win 7 not this practice. I then tried to install XP (I used a SP3 disk at startup of the system), but the computer shows blue screen after loading some files and would not start the installation program. I don't know if XP downgrade guide works because I have not seen tx2z in the list. Someone has an idea? Thank you very much.

  Try to "slipstreaming" the driver SATA HERE decompress to a folder and use nLite to update your copy of XP and burn a new cd.

  This guide shows "slipstreaming" one driver SATA Intel, but the process is the same:HERE

  Daniel also has a pdf guide of AMD only "slipstreaming" at the top of the forum, if you need it... called "SATA Drivers for XP".

• Tecra A2 blue screen when you select the display settings tab

  Hi, I have a Tecra A2 Windows XP SP2 (and all of the updates in automatic mode). Only two months. When I go to display properties and click on the tab settings of the machine crashes with a blue screen. Have tried to reinstall the driver provided on the CD with the machine but makes no difference. I tried downloading a more updated to Intel driver but it says that it cannot install it. Any suggestions from anyone, please?
  Also (may be relevant but do not know) in device manager I have two default monitors list and two identical cards - which is how it should be?

  Hello

  Yes, to you on time. In the device under Graphics Manager, two graphics controllers appear. But it's not a fault.
  Also Toshiba recommend using the graphic drivers of Toshiba. In this case, you should visit Toshiba's pilot Web site, and you need to install the graphics driver from this site.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Check if, after this installation, the blue screen error message occurs

• Blue screen when you insert the DVD - M40X

  Hello
  I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
  After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
  I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
  Is there a solution to this?

  Hello

  Well, as the support service team say that the DVD player is not able to read this format.
  But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
  Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

  Good bye