Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

Hello
When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

Hello

Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

Check it out!

Tags: Toshiba

Similar Questions

  • Blue screen when you try to install Windows XP on Intel ThinkPad Edge 520

    Hello

    I have a ThinkPad Edge 520 type 1143-B5G with a clean disk and I need to install Windows XP on it, for reasons of inheritance. I read on the pilot of the technology Intel Rapid store being necessary, but this seems not to apply to the 520, only to 220 and 420. The recommended settings are not available on the 520 (nor is the driver itself), and the driver is listed by n/a for the 520 in the list of drivers of Lenovo. But, I always get a BSOD error just as Windows is starting from the installation DVD, after the DVD instructed all pilots, he can think about.

    Anyone know how to fix this?

    Would BTW - be possible to install XP in a separate partition, main alongside Windows 7, on a drive that already has Windows 7 on it? Or a clean disk is needed for this?

    Kind regards

    / EvA

    Hello and welcome,

    What settings are you looking for?  It seems that there is a problem with the mode of operation of HD.  The E520 BIOS has an option to change the SATA compatibility instead of AHCI mode?  You will not be able to install a version of "Vanilla" of XP without adding the correct AHCI driver or compatibility mode.

    What version of BIOS do you have?  I see this rather cryptic reference in the BIOS 1.20:

    "[Fixes problem] problem reading/writing data to the SATA compatibility mode."

    It is possible to dual-boot XP and 7, but the best way to do is to install XP first and then let the 7 Installer put in place the configuration dual-boot.  You would still have the problem of compatibility (IDE) vs AHCI mode.

    Ah, lookinng a little further, there is a driver AHCI for XP in Lenovo driver matrix.  The readme file includes instructions on installation.

    Intel SATA controller AHCI Driver for Windows

    Readme for Intel SATA controller AHCI Driver for Windows

    Maybe you get.

    Z.

  • BSOD occurs when I try to install Windows XP Home on the Satellite A100-VA5

    I got a brand new Toshiba A100 - VA5 Notebook, here in Toronto in the Canada.

    Laptop came with Vista. I don't have a problem with vista, but there are some software that I need for my work and they do not work on Vista.
    I decided to install Windows on a partition, but when I run the XP installation CD, it errors on a blue screen with the error below

    The Blue error screen I get when installing WXP stop is

    Stop: 0X0000007E (0XC0000005, 0XF76450BF, 0XF7A91208, 0XF7A90F080)

    I searched on Internet forums, some people have had similar problems on a computer no-Toshiba with XP and the problem was caused because the XP installation CD does not have S - ATA Raid Controller drivers? Which after pressing F6 at the start-up of the plant, solved the problem.

    However, I was unable to find the drivers for the controller S - ATA Raid on Toshiba support site, and I don't know where to find them. Someone knows something like that and it is due to S - ATA Raid Controller drivers? And if the answer is Yes, where can I find them since?

    Thank you

    Omer

    Hello

    Everything you need you can find on Toshiba Canada support page http://209.167.114.38/support/Download/ln_byModel.asp#
    When you choose your part number do not forget, you use PSAANC-VA505C number (check also on the laptop label in the lower corner of your laptop).

    Now, back to the blue screen. As far as I know for this model of laptop is not necessary to install the S - ATA Raid Controller at the beginning of the procedure of the facilities. For laptops with RAID driver this driver is available on the download page. This driver is not available for your laptop model.

    You try to install latest Windows XP Home with Service Pack 2?

  • Satellite C650 - blue screen when you try to install XP

    Hey,.

    For a kind of werid reason my disappeard just win 7 and now I try to install Xp.

    And suddenly, when the facility is good on start, I get blue screen.

    -Does anyone know why I get the blue screen and a possible solution to this problem.

    PS: The XP cd is not bought at Toshiba

    Can you please tell us which drive do you use? Is it perhaps original disc of Microsoft?
    Service pack?
    What is defined in the Advanced BIOS for compatibility, AHCI or SATA option?

    Give us more information please?
    The exact model name and model number can also be useful.

  • I get a blue screen when you try to install XP Pro: Stop: 0x0000007B

    I'm doing a new installation of my CD XP pro (SP2) on a sata drive.
    My bios works with AHCI so I have the drivers on a floppy and press F6 when the installation starts. Finally, the screen shows it starts Windows but crashes with:
    A problem has been detected...
    The rest of her talking about the virus check screen, remove newly installed hard drive, check the errors with chkdsk and so on and gives the following Stop error message.
    Stop: 0x0000007B (0xf78D2524, 0xC0000034, 0x00000000, 0x00000000

    I checked the hard drive with a test of surface (past) deleted and reinstalled the partition and formatted NTFS.
    I have the disk sata hard connected to a sata 6 gb in the motherboard connectors, while the sata drive is an old one that is probably at the low speed of sata. Who would have something to do with it?

    Any ideas?

    Here's what I found for the 6 series chipset: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3273&DwnldID=20710&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+6+Series+Chipset+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+DP67BG&lang=eng

  • LifeCam is at the origin of the problems of "Blue screen" when you try to close?

    I get a blue screen when you try to stop, we have identified the "Lifecam can be the cause of the problem?

    Hello

    Thanks for posting your query in the Microsoft Community Forums.

    According to the description of the problem, I understand that you get Blue Screen of Death, when you use Lifecam on Windows 7 computer.

    We're here to help and guide you in the right direction.

    I suggest you to consult the help article and check if it helps.

    Method 1

    I suggest you update drivers lifecam and check if this may help,

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

    Method 2

    Visit the link mentioned for more information below.

    Resolve stop (blue screen) error in Windows 7

    Note: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

    Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

    Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.

    It will be useful.

    Let us know if you encounter problems under Windows in the future. We will be happy to help you.

  • I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

    I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
    One of the installation files seems to be corrupted. HR:0 x 80070003

    Hello Amawob,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    You cannot install some programs or updates.

    http://support.Microsoft.com/kb/822798

    Reset the Windows Update components.

    http://support.Microsoft.com/kb/971058

    That should solve the problem for you.

    Thank you.

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

    Original title: could not start the Service "Windows Defender" (WINDEFEND)

    When you try to install Windows Defender, I get an error message that

    "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

    How can I check which privileges I have and I need?

    I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

    Help please

    Hello

    This error message is because you have Norton installed on the computer. See the for more information section below.
    http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

    Let's try the steps and check them off below if it helps.

    Step 1: You can try to uninstall Norton and then check if the problem persists.
    Note: Reinstall Norton after verification.
    Reference: http://support.microsoft.com/kb/307895

    Step 2: Change the registry value and check.

    a. Click Start, type regedit.exe and press ENTER.
    b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
    c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
    d. enter 0, under value data, and click on the OK button.
    e. close the registry editor.
    f. restart the computer.

    Registry warning:
    Important
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • When you try to install windows update I recive 0 error code 80070424 x

    When you try to install windows update I recive 0 error code 80070424 x

    Hello

    You can follow this link & check if the problem persists:

    Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updates, or when you start Windows Firewall

    Hope the helps of information.

  • Product ID invalid when you try to install Windows XP on VMware.

    XP installation of VMware

    Hello

    I have a PC under win 7. and I am trying to Flash an old router to wireless access point for a spot of dead in my house. To cut a long story short, I need to Flash the router using a software program that does that on XP (I tried the compatibility options in Windows 7 and it does not work). Then I put on the implementation of a virtual machine using VMware and an old copy of XP, I had. However, when I try and install XP I get the error that the product id is not valid. Now, I know that the software is legitimate - it was part of a XP operating system provided with an HP laptop - so my question is how I can get through the installation? I will not buy another XP code - after all I will ever use again once I finished the flash - and for the same price, I could buy a new router!. I just want to save the Earth, a small piece of discharge potential and save myself $20!
    Any help appreciated
    M
     

    Hi MarkPinches,

    Follow the steps in the article.

    You receive an error message after you enter the product key when you try to install Windows XP

    http://support.Microsoft.com/kb/310637

    If the problem persists, contact VMware support for more help and information.

    http://www.VMware.com/support/

    For reference:

    How and when to contact Microsoft and support Customer Service

    http://support.Microsoft.com/kb/295539

  • Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358

  • Error 0 x 80070103 when you try to install windows vista

    I have windows xp media center edition version 2002 with service pack 3, when I try to install windows vista home basic he said: I do not have enough memory for temporary files and I should free space on my drives. What exactly should I do? I don't have much on my computer to begin and I already uninstalled all unnecessary files, I could think of. Any help would be appreciated thanks.

    Hi sargent_bilko,

    Please use the forum for Support of Vista,

    What is your hard drive? Did you check how much free space on your hard drive?
    Please run the Vista Upgrade Advisor before trying to upgrade to identify your problem:

    http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx

    Let us know the result of Vista Upgrade Advisor, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

    error 8007090

    I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

    Hello

    Are you sure this is the error Code?

    And not this one?

    It is the opinion of Microsoft about the error code 80070490.

    'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

    http://support.Microsoft.com/kb/958044

    Method 1: run (Checksur.exe) system update readiness tool

    1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

      For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

      (http://support.microsoft.com/kb/947821/)

      Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    2. Try to install updates again.

    Method 2: perform a Windows repair installation

    If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

    If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

    "This has occurred as soon as I updated from Windows XP"

    You have the upgrade DVD?

    Here is a tutorial on how to do it:

    "How to perform a repair for Vista Installation"

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

  • When you try to install Windows Service pack 3, I get an error code 517.

    Original title: update to Service Pack 3

    When you try to install Windows Service pack 3, I get an error code 517.  What is & how to fix it?

    Hello

    1. where did you get the service pack 3 for windows vista?
    2. which service pack is currently installed on the computer?

    There is no service pack 3 for windows vista. The latest service pack for vista is service pack 2.

    The following articles could be useful.
    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791
    Service Pack Center
    http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  • get 80071AA7 error code when you try to install windows vista sp1

    get 80071AA7 error code when you try to install windows vista sp1

    80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
    The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

    (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
    How to perform a repair for Vista Installation

    All personal data will be kept. All updates applied previously will need to be reinstalled.

    (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

    3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

Maybe you are looking for