Blue Tooth not good Magic mouse, didn't follow

Similar Questions

• Magic is not so magical Mouse in Excel 2016

  There a solution to the issue with the mouse wireless in Excel 2016? I have a lot of trouble with the click of a mouse in Excel. I have to move the mouse out of the cell, I work in, click a cell away from her several times and then come back and try again. It's really very frustrating and complete a productivity killer. So distracting and stressful. I saw another thread that mentions this problem, but no good suggestions other than using a different mouse... I checked the MS forums as well and there are 22 other people in a single thread that have the same problem, but I do not see a response that does not involve the use of a wired mouse. I do not want to do.

  So I think it's a bug of MS Office.  Someone at - it suggestions other than using a different mouse? Thank you...!

  Cathleen

  Cathleen Hello,

  You ask about the new Magic Mouse 2?    This has had some changes and is designed only to work with the El Capitan OS 10.11. x and upwards.  It is possible that the Excel program has been updated to allow this, but there again, maybe not.   I don't use Excel so I don't know.

  Excuse the intrusion, but I asked the hosts to remove your e-mail address of signature.   It is unwise to publish in a public forum, if it has a link trade or not.

• Blue tooth not installed vista device drivers Home premium

  Tooth blue device drivers not installed code 28 family vista premium Think pad r61i driver unknown on enumerator Microsoft Blue Tooth please please help thanks

  Hi Atella,

  Welcome to the Microsoft Answers site!

  The system hive has exceeded its maximum size and new devices cannot work until the size is reduced. The system hive is a permanent part of the registry associated with a set of files that contains information related to the configuration of the computer on which the operating system is installed. Configured items include applications, user preferences, devices and so on. The problem could be but who is more connected to the computer, specific devices are always listed in the system hive.

  Try the following steps.

  Method 1

  Step 1

  1. put in place the Device Manager to show devices that are more connected to the computer.

  (a) click Start

  (b) type cmd in the start search box then right click on cmd in the top of the start menu and choose Run as administrator.

  (c) command prompt opens ups.

  (d) at the command prompt, type the following command and press enter:

  Set devmgr_show_nonpresent_devices = 1

  2. in Device Manager, click view, and then click Show hidden devices. You will now be able to see devices that are not connected to the computer.

  (a) select the device you want to uninstall.

  (b) on the dialog device properties, click driver , and then click Uninstall. Follow the instructions.

  (c) restart your computer.

  3 uninstall devices that you no longer need.

  4. check the device properties dialog box in Device Manager to see if the error is resolved.

  5 reinstall the drivers.

  For more information you can consult this article if this is for windows XP
  http://support.Microsoft.com/kb/310123

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavilion 2 detachable x: no blue tooth not more. Win 10 of Pavilion x 2

  
  

  Remove the Chuck and let windows find and reinstall a driver

  solved my problem with the blue tooth. It is back and functional!  With one Advisor to Mrstenter in another case,

  This problem is solved!

  Strange as if little has changed in the way Windows resolves its problems since the mid-90s, when I was an active windows user. Brute force seems to be the solution to everything.

  Thanks Mrstenter.

• El capitan and scrolling of the mouse Magic Mouse

  Salvation in the retina of MacBook 12 "2016 with El Capitan 10.11.5, I plugged a mouse wireless magic, but the scrolling feature, nor work. Can you help me? Thank you

  Hello Cristoan,

  Thank you for using communities of Apple Support.

  I see that you are having problems with your Magic Mouse didn't scroll not correctly. The following article provides basic troubleshooting for Apple wireless, including the mouse Magic Mouse.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  Best regards.

• Sensitivity of the magic mouse 2

  OS X 10.11.3 (15 d 21) model name: iMac model identifier: iMac14, 2 name of the processor: Intel Core i5

  I recently changed to a Magic Mouse 2 and it worked perfectly. Recently the sensitivity seems nave has increased as evidenced by the fact that I have to hover over a link to activate it. How to restore to original operation?

  Hi DCRIOW,

  If you want to adjust the settings of your Magic Mouse 2, take a look at the resource below to adjust the settings in system preferences.

  Using system preferences

  Preferences system systemic control ("global" settings) and is available in the Apple () menu in the upper-left corner of the screen. Preferences system allows you to set things like your resolution screen, keyboard, mouse, sound, taken the printer settings, settings, accounts and more sharing.

  Customize your mouse

  The preferences panel mouse look different depending on what type of mouse you are using. These settings allow you to set the mouse sensitivity to control how quickly the pointer moves on your screen when you move your mouse, and adjust your double-click reflexes. Other controls may be available, depending on the type of mouse you are using.

  

  1. In the Apple Menu, open system preferences.
  2. Choose View > mouse, or click on the mouse icon.
  3. To control the speed of the pointer (cursor) moves across your screen when you move the mouse, click on Point & click and use the tracking slider to adjust the speed.
  4. If double-click speed if poster, you can use the double-click slider to adjust the speed.
  5. To change the action settings, click the tab more moves. You can enable and disable the gestures for blow and the Mission control.

  Configure your Apple wireless devices

  Mouse Magic 2, Magic Keyboard, Magic Trackpad 2

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to USB cable to the port of lightning on the device and plug the other end of the cable to your Mac.
  2. Make sure the switch is in position I. (Green will be visible).
  3. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  4. The Bluetooth Preferences window shows the status and costs connecting your device. When the device is charged, unplug it for wireless use.

  Note: The Magic Mouse 2 unusable when you are connected to the cable.

  Take care

• Blue Tooth Mouse pairing attempts failed on Mac mini after several months of service

  Hello support team,

  My attempts pairing Blue Tooth Mouse (for my "Easy blue Typhoon" made in Germany) are retained is NOT on my Mac mini once I used the 'Typhoon BlueEasy' mouse for several months in good pairing function combined with my Mac mini.

  Already I changed the batteries (which are not emptied) for rechargeable batteries (filled 100%) now - but this does not solve the problem of coupling:

  

  The easy blue Typhoon is not damaged/broken - it works fine on my other devices.

  I think that all of a sudden the 'mini Apple Mac system' blocked matching by some unknown reason.

  Jona li

  -

  You said "it works well on my other devices".

  The other device are on and have Bluetooth turned on?

  If the mouse BT is pairing with other devices?

• Last Magic Mouse 2 is not compatible with the Mavericks 10.95 - and that stinks

  It is not so much a question as an expression of stunned disappointment.  My old mouse Magic went kablooey, and so I got a new.  Unfortunately when I the paired with my MacPro 2012, running the Mavericks 10.95 (sorry Apple, you have not matched the Mavericks speed and performance with Yosemite and El Capitan) I discovered that features the touch like scrolling and swiping has not worked.

  After an hour to read the little booklet that comes with the mouse, zap the PRAM, reset the SMC and usually ask myself? *  I watched the Magic Mouse box and found the answer in 3 grey dots on white type: requires OS 10,11 or higher.  All right.  Mea culpa, caveat emptor, blah blah.  I should have read through the entire page of the Magic Mouse on the Apple Store Web site, but I already have the product so don't figure there were many new take into account.

  However, it seems strange to me that a completely necessary peripherals does not work with a BONE from a few years ago.

  There are loyal customers (30 years of computer science and I have never used or owned a PC) who use your products as professional (I'm a sales manager of creation) and, for reasons that go beyond taste, prefer your earlier and faster OS.  Apple wants to move the herd along for many understandable reasons.  I do advertising.  I get it.  Offers new features and the "improvements" that Miss on users who refuse to put up-to-date is perfectly logical.  But prevents them from having a functional Apple mouse goes too far.  It will encourage strong armament and it stinks.

  In light of Apple's strategy, it seems pretty ironic that the same company that once derided the PC world as thinkers authoritarian group straight out of Orwell is curve at this level to get its users to conform to his version of the future.  What the * happened to "Think Different"?

  Good question, I guess, and I can only opine; as you know, we are here just volunteers.

  The question is... when a company changes its products.   As I see it, different operating systems have developed over the years at a huge pace, such that cannot not could be foreseen four years ago.   So the Magic Mouse 1 was fine for the moment but did not have the ability to adapt to meet the current needs.     So what does Apple?   It must be a new mouse that will respond to current needs and anticipate the needs for some time in the future.

  You can still buy the old MM1, although you might have to go hunting.   And of course, you can take the old one back if it was purchased less than 14 days ago in most countries and 28 days ago in the United Kingdom and most European countries, I believe.

  I hope you get over your troubles.

• Magic Mouse 2 * new * does not work

  New macbook and new magic mouse 2 but I can't connect via usb or bluetooth, I tried to restart the two and wait for it to load. literally, I don't know where to go from here. need help! Save me

  Note: Magic Mouse2 cannot be used when you are connected to his cable.

  • Setting up your Apple - Apple Support wireless devices

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to the USB cable to the port of lightning on the device and
  2. the other end of the cable to your Mac.
  3. Make sure the switch is in position I. (Green will be visible).
  4. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  5. The Bluetooth Preferences window indicates the level of status and connection fees of
  6. your device. When the device is charged, unplug it for wireless use.

  There are several opinions and comments about magic Mouse2

  http://www.Apple.com/shop/reviews/MLA02LL/A/magic-mouse-2

  also you might feel free to contribute to them, but also to comment

  Apple feedback • comments support • return of products

  Among the comments, are issues of the user that may or may not help you

  make the best diagnosis of your installation + user experience problem.

  If your product (MM2) is the Thunderbolt port, as it should, it may

  not being able to associate as some suggest it can, through the use of the USB port. Since

  This is not a. The port of loading may or may not be useful to attach

  mouse to the computer during the initial installation; to see if it is recognized.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • IPod, Mac and iPad US technical support:
  • (800) APL - CARE (800-275-2273)

  You can find it does not help. Or can the gremlin inside the MM2

  self-pity and decide whether to allow a connection in any case. Say what? Please?

  If the mouse was purchased directly from Apple (official, store or online)

  You should have 14 days to return the product. An Apple Store

  Genius can be useful in practice to troubleshoot or to help set up a mouse.

  My mouse are USB & all fasteners; they can't run away + I of good spare parts.

  Sorry your mouse is pointing upwards. I give a talk, no uncertain words.

  Good luck in this case!

• Magic Mouse 2 is not scrolling

  I just bought a Magic Mouse 2, and when I drag my fingers on it as indicated to scroll, it does not scroll vertically or horizontally. I read the instructions, watched videos... nothing. Check the settings and everything. Please help me fix it!

  Hi there sepowers51409,

  Looks like your Magic Mouse 2 is not all scrolling when you drag a single finger upwards or downwards at the top of the mouse. First, I would check to see if, perhaps, the scrolling speed is set at a minimum, which could make it appear as if the scrolling does not work.

  Change the way your mouse works

  You have another computer to test with to help us to isolate and fix the problem? Don't forget to UN-pair he from the current computer if you do, so that it didn't is no complications when you test.

  If you want to remove (désapparier) a device from the list of devices on your Mac, follow these steps:

  1. Choose the Apple menu > System Preferences, and then click Bluetooth.
  2. Place the pointer on the device you want to remove, and then click the button which appears next to the device name.

  From: using a Bluetooth mouse, keyboard or trackpad with your Mac

  If you do not have another Mac to test this then I would be:

  1 UN-pair the mouse with the above steps

  2 remove the batteries

  3 reset the PRAM on your computer

  4. replace the batteries in the mouse

  5 pairing and testing new scrolling.

  If the problem persists can create a new admin user or test this point to another user, you may have on the computer?

  OS X El Capitan: set up users on your Mac.

  Thank you for using communities of Apple Support, let us know how it goes!

• connect my lack of headset blue tooth, shows ofline but not pared, no signal

  my Bluetooth headset want to play he matched it still shows no signal, blue tooth mouse works

  Hi John,.

  To help you better, please answer these questions:

  1 operating system Windows are you running?

  2. what happens when you try to connect the Bluetooth headset with the computer?

  3 you get a specific error message?

  4 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method2: Remove and reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2. Select the device that does not work, then click on remove.

  3. click on add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click on Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  6. make sure that the device is on and that the batteries should be replaced.

  7. make sure that your computer's Bluetooth adapter is attached and put on the market, and that the device is turned on and discoverable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  ·    Make sure that you have installed the device using the appropriate program. If this isn't the case, reinstall the device.

  Note: also update the latest drivers.

  See the following links for more information:

  Add a Bluetooth device to your computer

  
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices

   

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device

  
  

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• V470 blue tooth wireless mouse has stopped working

  My Logitech v470 blue tooth mouse worked but stopped.  I went online and downloaded the latest version of the software.  The machine started to work.  I used for1.5 days and on the second day, all of a sudden, it stopped working.  All diagnoses that I know say it works.  The blue light comes on when I press the search button but never connects.  The computer says, the device works, but it does not.  Please help since the pad on my laptop is more sensitive (opens instead of allowing me to do some drag on the desktop) and I need the mouse to work around the touchpad.

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct this contact Logitech

• After the update of Sierra: not to Disable Trackpad with Magic Mouse connected

  Hello

  After that I updated to macOS Sierra on my MacBook Pro the Trackpad is not disable mouse connected with Magic.

  Feature: MacBook Pro retina 15 inches (end of 2014) on macOS Sierra.

  Since the update, I noticed that my stays compatible with my Magic Mouse connected after built-in trackpad window connection.

  In system-> accessibility-> mouse and Trackpad preferences, I have not "ignore the built-in trackpad when mouse or trackpad wireless is present". If I switch it off and on again once again, the parameter will be.

  However, once I lock the device (user name right-> connection... window) and reconnect, the trackpad works. You must pass the parameter each time.

  Is this a bug of Mac OS Sierra (can't find anything) or am I missing something? I am aware that the trackpad is reactivated at the login window, but before it will deactivate after logging in.

  I don't use Magic Mouse, but I have USB Wired mouse and I have the same problem since installing Sierra.

  I have the box ticked, but I must go and clear the check box and then save.

  I have to use a mouse all the time because my trackpad goes haywire and I wasn't able to find a solution for this. It moves its own and open stuff on its own.

• Can not good press the mouse on the name of the file and get the option of e-mail

  Can not good press the mouse on the name of the file and get the option of e-mail

  Hello! If I understand your question, you want to right-click on a file and attach it in Mail. To do this, click on the file with two fingers on the touchpad, or control + click on the file, select 'Share', then 'mail '.

  I hope this helps!

• Magic mouse 2 not showing all preferences.

  Hello people, I had my magic mouse 2 now for about 2 months, but have always failed to scroll right I don't see not all preferences. I only get the option of tracking speed and double-click speed.

  I have the latest version of the software updated on my mac, etc.

  See I don't get the options for 'Scroll and zoom' etc.

  Please help me and thank you in advance.

  Can you re - check the version number of your OS.   With the magic mouse 2 you must have the El Capitan 10.11.5.   I use this but my magic mouse in system preferences is different, as you can see.