Blue Yeti works more when the upgrade to 10.11.5

Wanted to ask if anyone else may have had this problem.

Blue Yeti has been working flawlessly so that day, that I have updated to OX X El Captain 10.11.5 the microphone no longer works with Screenflow or Garage Band.

It could just be a weird coincidence and blue yet Mic is broken. The led lights when it's plugged in, so it has the power. Any ideas on how to test it?

Try to configure the yeti like new

  • Connect to Yeti with the supplied USB cable.
  • Click on the Apple-> System Preferences menu.
  • Select sound.
  • Click the output tab and select Microphone stereo Yeti under Select an audio output device.
  • Click the Input tab and select the Microphone stereo Yeti under Select an audio input device.
  • Out of system preferences

If it still doesn't work try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

I did not, but you can try another USB cable?

Tags: Mac

Similar Questions

  • When the upgrade to Firefox 3.6 4, it will keep your settings, bookmarks, session Manager tabs, etc.?

    When the upgrade to Firefox 3.6 4, it will keep your settings, bookmarks, tabs/Session Manager settings, etc.?

    When updates to Firefox, it will use the profile folder existing (location where user data is stored). It's going to use you current bookmarks, use passwords, cookies and other data.

    During the upgrade, it will check your extensions and themes to see if they are compatible with Firefox 4. If they are not compatible with Firefox 4, it will offer to check updates and if none is found, it will disable the.

    Although not exhaustive, the following link shows the compatibility of many popular add-ons. Those listed as compatible with 4.0. * or more should work on Firefox 4 - https://addons.mozilla.org/en-US/firefox/compatibility/report

  • The upgrade to El Capitan - I changed all my Albums events... When the upgrade takes place I guess my events will disappear and the albums newly displaced will remain

    I am upgrading to El Capitan, and have all my Albums events... I guess when the upgrade is finished that my events will disappear and the rest are my albums and will not be duplicated in "events".

    NO.

    All photos will be migrated, smart albums will be migrated insofar as their criteria is supported in the Photos and all events will be converted into albums and stored in a folder called iPhoto events

    How Photos handles content and metadata for iPhoto and Aperture - Apple Support

    and read this trick of the user - Notes on the migration of an iPhoto for iPhoto to Photos for Mac library

    LN

  • Engravers Blu - ray Samsung SE - 506 Monte is more after the upgrade of the El Capitan

    Hi all

    MBP, in early 2008, El Capitan 10.11.2...

    My Samsung Portable Blu - ray writer, SE-506CB/RSBD Monte is more after I upgraded to El Capitan, last week.  The drive itself is only a few months old.

    The problem is not the USB ports, like other devices work fine with all the USB ports on my MBP.

    Note that I'm NOT trying to read or write a Blu - ray disc.  I try only to play audio CDs, I've done successfully before the upgrade to El Capitan.

    Someone had this problem?

    Thank you...

    For what it's worth, I have this problem as well.  The drive tray would not eject even with a single cable, so I switched to another.  I could then open the drawer (seems odd for me) but the disc would not rise.  Here's the info from the console log that indicates that the operating system is getting bad feedback from the pilot saying that the disk is defective.  This same drive/cable/disc work very well on my MacBook Air 10.10.5 and had worked perfectly well with this MBP even before the service (and "free" upgrade to EC by Apple).

    Console

    09/01/16 12:34:49.000 kernel [0]: AppleUSB20HubPort@fa130000 011849.735343: AppleUSBHostPort::resetGated: a new attempt to list 100 MS

    09/01/16 12:34:50.000 kernel [0]: AppleUSB20HubPort@fa130000 011850.924723: AppleUSBHostPort::resetGated: a new attempt to enumeration in 200ms

    09/01/16 12:34:51.000 kernel [0]: AppleUSB20HubPort@fa130000 011852.236095: AppleUSBHostPort::resetGated: a new attempt to enumeration in 400 ms

    09/01/16 12:34:52.000 kernel [0]: USBMSC (non-unique) identifier: (Korean characters removed) 0xe8d 1956 0 x 0 x 0, 2

    09/01/16 12:35:10.000 kernel [0]: disk3: alignment error.

    09/01/16 mds 12:35:12.432 [74]: (Volume.Normal:2464) volume: 0x7ffc330a4c00 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/ENTOURAGE

    09/01/16 mds 12:35:12.456 [74]: vsd:0x7ffc33173400 (Volume.Error:577) open failed.  failureCount:0 (null)

    09/01/16 12:35:23.000 kernel [0]: smb_smb_ssnsetup: GROUND does not support extended security, this server will be deprecated in the future!

    09/01/16 mds 12:35:27.471 [74]: context of recycling: 0 (Volume.Normal:166) vsd:0x7ffc33173400 DisabledStore: {}

    DisabledRecycleCount = 1;

    }

    09/01/16 mds 12:35:27.502 [74]: vsd:0x7ffc338c6000 (Volume.Error:577) open failed.  {failureCount:1}

    DisabledRecycleCount = 1;

    }

    09/01/16 mds 12:35:57.502 [74]: (Volume.Normal:166) vsd:0x7ffc338c6000 DisabledStore recycling: 2 context: {}

    DisabledRecycleCount = 2;

    }

    09/01/16 mds 12:35:57.540 [74]: vsd:0x7ffc308c8400 (Volume.Error:577) open failed.  {failureCount:2}

    DisabledRecycleCount = 2;

    }

    The drive works perfectly well with this disc in 10.10.

  • HP ProBook 440 G2, fingerprint reader works not when I upgraded the Win 7 Pro form to win 8.1 Pro

    My HP ProBook 440 G2, finger print reader does not when I upgraded the Win 7 Pro form to win 8.1 Pro.

    Device manager showing the biometric reader works correctly. But in fact, the finger printer reader is not reading or senseing. It seems that the part "dummy". Please help me to correctly configure step by step for that matter.

    Thank you

    Hillet

    Have you installed the software driver validity sensor fingerprint for Windows 8.1?

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943811 & swItemId = ob_134806_1 & swEnvOid = 4158

    See page 64 in the manual Windows 8.1 according to the configuration of fingerprints of validity information

    http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=6943810 & docid = emr_na-c04371762 & docLocale = en_US

  • CalendarAgent close unexpectedly and more after the upgrade to 10.11.5

    After the upgrade to 10.11.5, I get popup after popup stating "CalendarAgent quit unexpectedly" (forgive the change of fonts copy paste)

    He's going to stay here until I have click and then within 10 seconds, it will return. After reboot, after forcing reboots, nothing I've tried so far solves the problem.

    Anyone else having this problem?

    joelb

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • A Web site cannot be displayed more after the upgrade to version 14.01

    I use www.kpnvandaag.nl as a homepage. After the upgrade to version 14.01 this site and only this site will show no more. When go to this page, an error is displayed that says, translated freely: there is an error.
    This page cannot be displayed.

    What is a Web site or Firefox (or other causes) error?

    You may also need to check the settings I n your security software (Norton) to ensure that nothing is blocked.

  • Satellite Pro M30 graphics works not when the driver is installed

    Hi all

    I m having problems with my nvidia Geforce FX Go5200, in a portable Satellite Pro M30, (processor Intel Pentium M 1.7 GHz, 512 MB Ram). This card was working fine suddenly the laptop stops.

    I formatted the laptop and installed Win XP PRO. After installing the driver VGA, I restarted the laptop, but black screen started to come right after the Win XP splash screen appears. The laptop continues to start up but no screen.

    It starts fine in safe mode. I get my best screen simply by disabling the geforce card or uninstall the driver. I tried to install a new driver for the VGA on the download from Toshiba site, but same problem appears. I also tried the BIOS update but nothing happens.

    Can someone help me?
    [email protected]

    It's very strange question. It will be really interesting to know if this happens when you use the CD delivered recovery facilities.

    In any case, I assume that there is a problem with the LCD display. In safe mode, the desktop appears in the resolution decreases but the resolution to the OS boot will be suitable for a standard (1280 x 800), and of course, there is the problem.

    I am not a technician, but I recommend you contact the Service partner. AFAIK they use special tools and programs for display tests. They can tell you more.

  • Field containing average function works only when the data are engaged on the same page. Does not work for fields on other pages.

    I'm having a problem with a field defined to calculate the average of eleven points fields (points 1 to 8 on page 1-9-11 on page 2). My original question was that it could exclude fields of points when they do not have information entered and adjust the average calculation (number of "divided by") accordingly.

    I had someone write JavaScript code for him, but I just found a small problem I don't know if it's something in the code or what the person who originally wrote the script cannot understand it either and suggested that I have post here.

    The middle area (located on the 2nd page of the pdf page two) seems to work exclusively with precision if at least one of the points of the fields on the 2nd page, 9, 10 (and 11) are engaged with the data. No values entered on the first page and only the first page, are for some reason any dividing by a more than expected. For example, if I fill the boxes 1, 2 and 3, it divides the total by four. If I filled just box 7, it halves. If I fill all 8 boxes on the 1st page, it divides by nine. It is corrected as soon as I get the points in one or more of the three boxes on the 2nd page points, suddenly the overall average is accurate. But if boxes 9, 10 and 11 contain no points, then the average is still inaccurate because the number of ' divide by "he uses is one more than what it should. I can't understand how to attach the form to this post, so I downloaded on Dropbox: Dropbox - used Evaluation.pdf.

    Under the direction of State: javascript came work to exclude the empty boxes when the points are entered in one of the three points of fields on the 2nd page (and more), but the average function is not accurate because it adds 1 to the number of ' divide by "in the calculation of the average If the points are only entered into the fields on the 1st page.

    Here's the code I entered in the 'Custom calculation Script' box in the 'Calculate' tab of the Properties menu of Test field:

    Initialize variables

    var num = 0;

    var sum = 0;

    Browse the input fields

    for (var i = 1; i < 12; i ++) {}

    var f = getField ("points." + i);

    If {(f.valueAsString)

    increment the counter to non-empty field

    NUM ++;

    Add the value of the running total field

    sum += + f.value;

    }

    }

    Calculate the average

    If {(num)

    Event.Value = sum / num;

    } else {}

    All fields are empty, then the empty value

    Event.Value = "";

    }

    I do not see that. Add the code of script debugging will display the results that each field is completed:

    Initialize variables
    var num = 0;
    var sum = 0;

    Browse the input fields
    for (var i = 1; i)< 12;="" i++)="">
    var f = getField ("points." + i);
    If {(f.valueAsString)
    increment the counter to non-empty field
    NUM ++;
    Add the value of the running total field
    sum += + f.value;
    }
    }
    Debug - display results as the form is filled;
    Console.Show
    Console.println (sum + "/" + num + "=" + sum/num);
    end of debugging;
    Calculate the average
    If {(num)
    Event.Value = sum / num;
    } else {}
    All fields are empty, then the empty value
    Event.Value = "";
    }

  • Why is not synchronize Lightroom CC more after the upgrade?

    Hello

    I recently upgraded to Lightroom and since no photos to sync to the cloud. It says on the desktop app 'x Sync photos' but nothing ends on the cloud or mobile devices (Android). I can see the names of collection, but not photos. I followed the various Councils of deleting file of data synchronization and data to mobile devices, but without success. Before the upgrade everything worked well. Can anyone help?

    Could you please send me a journal diagnostig Desktop LR - better as a private message with a downloadable dropbox link.

    You can trigger the newspaper through Desktop LR-Mobile with Lightroom > preferences, and when you hold down the ALT key, you will notice a diagnostic log button to generate

    This problem occurs when you are connected via ethernet or wifi? BTW. Does the job of synchronization for your with an earlier version of Lightroom?

    -

    Guido

  • Help! JavaScript works not when the object is moved from one page to the other!

    Hi all:

    I am new to Adobe Livecycle Designer (version 8.0). I created an interactive pdf form of 3 pages with many objects (text fields, radio buttons, drop-down lists, etc.), our company wants to quickly start to use.

    I'm having trouble with some of my Javascript does not not with some of my items on page 2 of the form. Specifically, there is a drop down menu to "Country" on page 2 of my form. When the user selects, for example, 'United States' in the list, I have the Javascript code that is supposed to change the 'currency' list drop-down to "Dollars" rawValue accordingly (on the change event).

    I think that my Javascript syntax is correct, but I am not sure. Here's my simple Javascript associated with the "Country" drop-down list (Note: rawValue 80 = 'United States' and 105 rawValue = "US $"):

    -


    Form1. Page1.cmbContactInfoCountry::change :-(JavaScript, client).


    If (this.rawValue == 80) {}

    cmbCurrency.rawValue = 105;

    }

    It sounds pretty simple and it WORKS when my "Country" drop-down list is moved to page 1 of the form, but it WON'T WORK when I move the combo box "Country" return to page 2 of the form (i.e. where it belongs).

    Anyone has suggestions or solutions? I spent probably 6-8 hours of racking my brain trying to figure out why it works when on a single page, but it does not work when to move to another page. I guess I can have corrupted something OR that I not address fully the proper name of the object?

    Help, please!

    Frustrated and helpless, near Chicago.

    Taylor T

    Yes, it's a quirk of... in the drop-down lists when you select an item in the DOF it is not committed until you exit the field, unless you do the following:

    If (this.boundItem (xfa.event.newText) == 1) {}

    cmbCurrency.rawValue = 1;

    }

    ElseIf (this.boundItem (xfa.event.newText) == 2) {}

    cmbCurrency.rawValue = 2;

    }

    The xfa.resolveNode stuff was not necessary that both objects are of the same subform, and as such can 'see' each other.

    Think like a folder structure subforms - elements can see what is in their own folder but will say where to find things in other folders. If cmbCountry was subform1 and cmbCurrency was so in subform2 that rawValue above lines would look like:

    subform2.cmbCurrency.RawValue = 1;

    It's a good idea to name all your objects, subforms, etc. it is to work with script is much easier - so you won't have to deal with things like these pieces of xfa.resolveNode you had before (as well). He ones because you have more than one subform called "subform", the number of hooks is the Instance number (when you have several of the same object) if the program has to differentiate between the various "subform".

    The number of instance come in handy, but for things like the rows of the table and so on when you need to make calculations.

  • My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

    Hello can anyone give solution to my problem.

    my iPhone touch 5 works not when it is in locked mode and it's time all incoming call came the touch works do not. other times, the touch works normally wat is the problem. ?

    If you disturb not activated. Settings > do not disturb.

  • Pavilion G6-2399sa: wireless and Ethernet doesn't work anymore since the upgrade to Windows 10

    Upgrade the laptop for Windows 10 today (8.1), or wireless or ethernet connections are available to connect to the network with since.

    Device Manager indicates that the two pieces of equipment are working properly.

    I tried to uninstall Win 8 drivers and restart the laptop. Windows installs generic drivers for devices and reports that they are working properly. The links do not appear in network connections.

    Also flight Mode light is constantly display orange rather than white even after disabling the operating system flight Mode. Pressing the F11 key does not change the State.

    Card manufacturers seem to be all WIndows 10 pilots available is HP.

    He handpicked the Lenovo's Office. I guess he will do the same on HP laptop

  • Wireless connection works only when the printer is turned off

    my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

    Hi Moscotty,

    You can read the following article and check if it helps.

    Windows wireless and wired network connection problems

  • Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

    Hello

    I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

    I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
    Concerning
    Tomgold

    Hi tomgold,

     

    Welcome to Microsoft Answers Forums.

    This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

    I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

    Device Manager error codes

    http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

    If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Upgrade HP p7-1110 for Ivy Bridge CPU (Pentium G2030)

    Hello, everyone. Someone please tell me if I can replace the CPU for HP P7 - 1110 with a Pentium G2030 Ivy bridge? The motherboard is known as IPISB-CU (Carmel2). Thank you for your help.

  • Exhaustion of the handles to change notification (SMB requests)

    I run an app, Matlab, on winxp 32 sp3, that internally uses Exchange requests for notification on a good amount of directories and a good amount of these directories are remote (lan) on a 64-bit win7 machine. When I start the application it tells me

  • When I update a message says that I must have a genuine windows validation and wait.

    When I update on windows a message says that I have to have a genuine windows validation and wait. Then I get a blank screen on http://www.microsoft.com/genuine/validate/ValidationResult.aspx?displaylang=en&End=http%3a%2f%2fwww.update.microsoft.com%2

  • Changed my screen resolution/font size

    After you download the latest updates, my resolution size and changed screen fonts.  I was not able to get the slightly larger font size and a good resolution. I get the fine print on screens and large fonts in the Middle! Help. Is there anyway to fi

  • Sending form notifications based on filters

    I have a frustrating morning working on the best way to send notifications by e-mail to the VRP, based on their territory of NA, when they submit a form.I have four representatives who manage a set of States.Is there a better method than the use of E