Bluetooth 3.0 Infinity Disney base no not matching on AppleTV

I have the new AppleTV 2015 and the Disney Infinity 3.0 starter edition that I ordered from the Apple Store a few weeks ago.  The box indicates that this is the version of bluetooth of the Base of the infinite and compatibility of Apple devices lists.  The operating system is updated to tvOS 9.1 and Disney Infinity 3.0 is installed, we have been able to play one of the Starter levels (battle of Yavin).  But there is no sign anywhere of the AppleTV, be able to communicate with the Base of the infinite, even after a few iterations of the electric based bike and restarting the AppleTV.

Is there an indication of mating or communication which should be evident outside the game?  In the Bluetooth configuration in the system preferences panel, I am able to see the controller that comes with the game starter pack and it pairs and works.  But, no sign anywhere of the Base of the infinite, which is turned on, nearby, and flashing her little blue light.

Should what steps I take to understand on which piece is broken, the Base, the AppleTV, or something in the software?

(a remarkable singularity, when I hold my phone near the Base of the infinite to try to take a picture, the answer Apple pay screen!  Is there an NFC chip in the Base?)

curious,

Rob

I have the same problem with the same material. As far as I know, the base will not appear in the menu bluetooth tvOS. Our base finally showed after power cycling a few times and made the right base against or on top of our Apple TV. Then, inside the Infinity Disney app, our base appears with full signal strength but we cannot choose to play with our numbers. We can only play the digital edition, while the base just flashes blue on the disk space of power. Very disappointing.

IF anyone knows a solution, let us know! Disney site has anything about it at the moment. Thank you!

Tags: Apple TV

Similar Questions

  • Satellite A300-1QD - "Bluetooth Stack for Windows by Toshiba" will not be installed

    Hello

    My system: Vista 64 Home Premium

    I already have the option for bluetooth devices in my Systemcontroll, but no device is shown.
    So I downloaded official Toshiba Bluetooth stack. At first, it seems that everything is fine, but after the second window, when RFBUS is installed and shown in the popup system that it is redy for use, the installation will stop. I don't know what to do? If I cancel the installer at this point, the installer said that the installation has been successfully and I should restart my system. Done, but no device.

    If I install the Bluetooth monitor too, I can connect to my mobile phone.

    Do I need the monitor? What is my fault on the battery Installation?

    If you are using an external Bluetooth USB adapter that is not Toshiba, then use the Bluetooth software supplied by the product.

    Do you use an internal Bluetooth module or a USB Bluetooth Toshiba adapter then I recommend the following?
    -Remove the "Bluetooth Monitor" software.
    -Remove the Toshiba Bluetooth stack.
    -Version of stack Bluetooth download the x 64 of the last battery Bluetooth.
    -Install the battery Toshiba Bluetooth. Make sure that you do not cancel any window during the installation. Be patient.
    -Do not use the Bluetooth Control Panel icon. It is still available, but you can not always use.
    -To start the battery Bluetooth just double click on the Bluetooth system tray icon or run it by double-clicking
    Start-> programs-> Toshiba-> Bluetooth-> Bluetooth settings

  • I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon with sprint 4g

    I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon 4g with sprint, if anyone can help me I appreciate it.

    Check with the manufacturer of your celllphone or Sprint to make sure your phone has this feature, and if so, what is needed to get there.  It should be in the documentation for the phone manufacturer or Sprint web site.

  • My plane and discriptions do not match base of FSX.

    I added freeware aircraft now selection screen are blurred and aircraft do not match the descriptions.

    Hi Donnio,

    1. where did you download the freeware aircraft?
    2. that you get the appropriate screen when you load another plane?

    I advise you to contact the Publisher of the plane of freeware for assistance on this issue.

    Hope that helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Helmet Jaybird not matching not...

    Helmet Jaybird not matching not...

    iPhone 7 more bluetooth keeps spinning, no device detected

    Hello qwer134,

    Thank you for using communities of Apple Support. And I see that you just got a new iPhone 7 more, congratulations! Always exciting when you get a new iPhone.

    I see that your Jaybird bluetooth headphones are having difficulties if the pairing on your iPhone. I definitely want to make sure that I can pair my headset to my iPhone, I use mine a lot. Let's see how I can help.

    Please see the article get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, specifically these sections:

    First try these steps

    1. Make sure that your device iOS and Bluetooth Accessory are close together.
    2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
    3. Restart your Bluetooth accessory.
    4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
    5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
    6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connect again.

    If you still cannot match or connect your Bluetooth accessory

    Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device.

    Contact the Apple Support if you have any of these problems:

    • You can't turn on Bluetooth or the setting is gray.
    • You cannot connect any Bluetooth accessories with your device.
    • The accessory manufacturer has confirmed that your accessory works properly.

    To learn more

    Find out what Bluetooth, profiles you can use with your device.

    Once you have gone through these steps, see if you get the same result when connecting.

    Have a great day!

  • Mouse BT is not matching in Windows 10

    Hello

    I hope this is the right place to ask this question, since it's on windows (but on my Mac)

    My problem is that my refuses to mouse (mouse Microsoft Comfort Sculpt) pair Bluetooth in Windows 10 (installed Boot Camp), while it works perfectly under OS X.

    What I do in the Windows 10:

    I start Windows, open settings - box Bluetooth, then turn on my mouse, then press on and has held the key "pairing" on this subject. The mouse appears on the list of discovered devices, I select "Even" and after a second or two Windows says "could not match, try again and make sure that the mouse is detectable again" the mouse disappears from the list and is not seen again here until I have restart Windows. I repeated this dozens of times without success procedure; I ran all the possible troubleshooting utilities - without success. I even downloaded and installed "Keyboard and mouse Center", but it obviously doesn't work because the mouse must be matched first to do the job of 'Center '. I contacted Microsoft, they suggested that I should find a suitable driver for my Bluetooth adapter, but the only driver I could find is dated the internal Apple Broadcom BT card driver, if I'm not mistaken, July 2015.

    I really need to make it work in Windows 10, because I have to work a lot in this OS and I prefer to use a Bluetooth mouse (not necessarily the real mouse, but since it works under OS X, even if I buy another mouse, there no guarantee that it will work in Windows 10).

    So, two questions:

    1. How can I make my current work (MS Sculpt Comfort Mouse) mouse in Windows 10?

    2. are there other BT mice who do you think is more likely to be achievable in Windows 10

    (I don't really want to buy Apple Magic Mouse - I prefer a traditional wheel 2 buttons + scroll mouse)

    How do you normally run Windows on your Mac? You start in Windows only using Boot Camp or you run Windows and OS X both at the same time using Parallels or Fusion?

  • the channel guide does not match the actual string

    the channel guide does not match the actual string that is to say PBS should be Channel 13 but is listed as channel 2 on the guide

    Hello James,.

    Welcome to the community of Sony.

    What is the model # of the TV?

    You can locate the model # of the TV from this link.

    You can try the steps mentioned on the underside of the base article of knowledge:

    http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C408137

    Please mark it as "acceptable Solution" If you find this information useful.

    Kind regards

    Colby

  • service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

    service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

    I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.

    Hi Carl_Focus_Phone,

    ·         Is confined with Update Service Pack 3?

    ·         Did you do changes on the computer before the show?

    You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.

     

    How to troubleshoot an installation fails on Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950718

    You can also see the following articles for more information:

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

     

    Learn how to install Windows XP Service Pack 3 (SP3)

    http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    Let us know if that helps.

  • HP Compaq 15 PC laptop 15-h024sg, do not installed the drivers, the characters on the keyboard does not match

    I am trying to install drivers such as WLAN, BLUETOOTH, CAM YOU in my laptop (hp Compaq 15 Notebook PC 15-h024sg), but I can't. It shows that my hardware or software does not support. I use Windowsn7 64-bit. More when I'm typing my keyboard and typing the characters do not match for all characters. So now, what can I do?

    Hello:

    You need the driver for the wireless card.

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_134477_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • "The file is maybe damaged. The file header checksum does not match the checksum calculated. »

    Hello

    I work with a HP Pavilion a6030n PC with Vista OS base. I had problems with the computer recently when starting. He continues to work at some point during the process and crash, forcing a hard stop. I'm not too computer savvy, but can generally work through questions. I tried several (and probably useless) methods to try to get the computer to work, with a modicum of success. Today, I received this message: "the file is maybe damaged. The file header checksum does not match the checksum calculated. "Hmmm... I looked through the forums and found a lot of computer-speak, who basically told me that I'm over my head. I thought that I would try at least ask the question before resorting to what is the hard drive a person to fix if all goes well.
    I can get it working again, or is my HP to his last breath?
    Thank you!

    If warnings getting You ' r files are corrupted, which could indicate a problem with the hard drive (most likely) or the memory/RAM in the computer (a little less likely but a good possibility).  Your computer came with a disk diagnostic or diagnostic software you can run to test the components inside?  You can also download this software and run it to see if he can help you narrow the possibilities.  Otherwise, I recommend to find a local repairman good and trustworthy and have them check for you if you are not adept at hardware troubleshooting.  It can get very frustrating and very expensive, very quickly.

  • Recovery scenario - vote drive does not match the guid of cluster

    Hi all

    Think you can not start your guest virtual machines just because it has a corrupted root system.img image. And suppose that it contains 5 physical disk (which are all created by the model CARS) where ASM on them.
    What is the easier recovery of computers scneario virtual comments (RAC)?

    Can this be a plausible scenario to retrieve availability? (Assume that both of the RAC system images are corrupted and we do not prefer a level system rather than backup recovery / restore)

    1 create 2 RAC instances using the same details of networking and the hostname that is corrupt. -Use the new 5 different drives.
    2 stop the newly created instances. Place the disks for instances newly created using virtual machine Manager.
    3. Add the old records the image system is unable to be corrected, but ASM disks are still in use (since the newly created instances using VM manager.) for newly created instances.
    4. open the newly created instances

    We want that the DSO and CRS have been initialized and be opened without problem?

    When I try this script I get the error the cssd/crsd shows.

    -Cluster guid 9112ddc0824fefd5ff2b7f9f7be8f048 found in the voting disk does not match the guid a3eec66a2854ff0bffe784260856f92a cluster obtained from the profile of negotiators.
    -Found 0 files preconfigured voting but 1 vote files are required, endpoint in order to ensure the integrity of the data.

    What could be the easiest way of recovery of a virtual machine that has healthy ASM disks but image corrupt system?

    Thank you

    Hello

    you have a similar problem, trying to clone data bases with 11.2.
    The problem is that a cluster is identified uniquely, and this information is considered in the OCR and voting disks. So exactly these 2 should not be cloned.

    To achieve what you want, simply configure your system in this way, you have a diskgroup separated for OCR and vote (and ASM spfile), should not be restored in the case of szeanrio.
    Only all files in database in ASM will then be exchanged later.

    Then what you want is possible.
    However, I'm not sure that the RAC models have the ability to install the OCR and vote in a separate diskgroup.

    Concerning
    Sebastian

  • The text of the e-mail under the column of the object does not match the selection

    When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

    right click on the folder, select Properties, and then on the button repair.

  • Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think.

    Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

    CBTEKRONY wrote:

    Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

    What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.

  • Of and/or submitted do not match body msg

    Hi all. Two weeks ago, I posted this problem under a different title, but got no answer, so let me try again once it is mess up maybe 5% of my email.

    Every morning I collect E-mail - from 40 to 70 messages, many from Gmail - and filtering of messages usually works effectively for transfer of the Inbox in the folders. But somewhere along the line, 1 to 3 emails get confused together: the and/or submitted do not match the text and the text sometimes includes the Source of Msg, including the text of some other, unrelated to email.

    I use FF and TB for more than 10 years now and believe this kind of email confuse goes back only a few months. I use the last Thunderbird in Windows 7 on a Dell desktop computer. I have 4 addons I hope so innocent. Of course I can send screenshots and the source of the message for analysis.

    Hoping this time to draw attention to the problem! Thank you!

    Large. If you please mark as resolved if you are satisfied.

  • The color in printed images is not match the colors on the screen

    I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

    Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

    The range Spyder products are not up to the task.

    The normal options for managing your color workflow are:

    1. using the X-Rite i1 photo system,

    2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

    3 - Send your files to a professional lab that is capable of producing quality work.

Maybe you are looking for

  • Can I use wildcards in blocking junk e-mail?

    I get spam viagracialis @?. I continue to block individual addresses, but then I get half a dozen more. Is it possible that I can identify emails beginning with the foregoing and to block all occurrences?

  • Satellite Pro M10: Questions of undocking Port Replicator II

    Hello I have problems with my port replicator. I have a Toshiba M10 with the APR II (PA3802). Everything on my machine works fine, but when I try to take my computer out of the docking station I slide the eject switch and the computer will not be sha

  • Satellite A500-138 - battery gets smaller when it is off

    Hello! I recently bought the A500-138 and I noticed that if the computer turns off for more than half a day the battery power is lower.For example, after 2 days when the computer does not work at all the battery starts to 88%. It it normal or there i

  • Satellite L670/055 - no response - symbol of any line of underscore "_".

    Can someone provide a response: I bought a L670 today and following instructions left for more than three hours to set up for the first time.Nothing seemed to happen all I have is the underscore symbol "_" in the upper left, - is this normal? I upgra

  • Dell XPS 12 Mini DisplayPort seems to have stopped working

    Hello My Mini DisplayPort seems to have stopped working. I can connect on the same monitor of the ultrabook even through the USB port. However, because I'm a geek of database I need up to 3 screens. So when I try and connect to my Mini DisplayPort mo