Bluetooth and the gesture of the wrist will not shut off

Similar Questions

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days.

  Original title: I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike

  I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike

  Hi Mike,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  I suggest you to go through the following articles and check if that helps.

  Error message when you start Windows Vista: "your activation period has expired".
  http://support.Microsoft.com/kb/925616

  Resolve activation problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  How to activate Windows Vista
  http://support.Microsoft.com/kb/940315

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  For more information:

  Validation failed? These scenarios may help to explain why.
  http://www.Microsoft.com/genuine/downloads/FailureScenarios.aspx?displaylang=en

  If anything in my post is not clear or if you have other questions, do not hesitate to let us know. It is our pleasure to be of service.

• HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

  HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

  The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

  When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

  Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

  For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

  I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

  Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

  I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

• Computers button just flashes and the computer will not start

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Hey Bowers

  you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

  otherwise, it would seem that you have a hardware problem

  Contact the manufacturer of the computer or a local reputable computer repair workshop

  Walter, the time zone traveller

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Spent 680 GTX to the 770, now MPE is disabled and the recording will not work in CS6.

  I recently had to return an EVGA GeForce 680 via RMA failure, and as EVGA was more than 680's in stock they sent me a 770 instead.

  I installed the card and reinstalled the latest drivers, and I got this error message when you open a project (CS6):

  "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA), which is not available on this system.  Mercury Playback Engine Software only will be used"

  I also get the following error message when you try to encode: "recorder captured No. Frames"

  I have so I uninstalled and reinstalled everything using this sequence:

  -Uninstall the wipes and utilities Matrox

  -Uninstall Adobe CS6

  -Run Abobe vacuum tool

  -NVidia drivers run Setup (ver. 337.88), making sure to check 'Perform Clean Install' (I installed only graphics and HD audio drivers. No 3D Vision, physx and GeForce experience)

  -Install Adobe CS6

  -Update Adobe CS6

  -Install the Matrox utilities

  -Restart the PC and the power of Matrox cycle

  -Install the Matrox models

  The Matrox I use is THE MX02 w/MAX (version 7.6.0.1993)

  Windows 7, Adobe CS6

  After re-installation, I still get the same error messages.

  Can someone please offer assistance so that I can get back to editing?  Thank you!

  The 680 was on the list of "Supported", the 770 apparently not. No worries. It works, they just never specifically tested and they do not want to engage in something that they haven't tested.

  Just delete the file named cuda_supported_cards.txt and the problem will disappear.

  Regarding your Matrox stuff, I have no idea. I'm sorry.

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• SE error message: there is a carriage jam and the printer will not printusing HP PSC 2355xi printer all in one

  Original title: transport jam

  Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

  It is a hardware problem, not a Windows problem. You should contact HP for assistance.  This may mean that the engine or the running gear is toast. They should be able to tell you which components to check.

  writing in the new message: * e-mail address is removed from the privacy... *

  Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

• I just finished making a video and went to look once more time to correct small sync and the video will not play!

  video will not play

  I have just made a video and went to look once more time to fix tiny desync and will not play the video! Help!

  Hi Tasha,

  1. you play the video in movie maker himself?

  2 operating system Windows after you?

  If you use Windows Live Director, you can post your query in the Windows Live Forum for assistance.

  Windows Live Support

• My dell Inspiron 1150 windows xp password son has locked and the screen will not change, we do not know the password or have we not the reset disk, how can connect to reset password

  My dell Inspiron 1150 windows xp password son has locked and the screen displays the dell logo and says that I need the master password or administrator, my son can't remember and we do not have the reset disk, is it possible to get and reset the password or enter the system

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Tricky

• My Start button and the taskbar will not drag to their correct positions. Also my clock has position of bud and watch military time

  My Start button has moved to the top left corner and the time display and the bar spots went vertical to the position of the lower left corner. Clock military time.  Unlock the taskbar and try to drag-and - drop failed. Help, please.

  On Wednesday, October 10, 2012 20:16:51 + 0000, Inezbower wrote:

  My Start button has moved to the top left corner and the time display and the bar spots went vertical to the position of the lower left corner. Clock military time.  Unlock the taskbar and try to drag-and - drop failed. Help, please.

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.

  Ken Blake, Microsoft MVP

• I seem to have a problem with the accessibility, the start-up wizard he show s up and the lens will not close

  I can't stop the Accessibility Wizard, it starts at the start, I don't know how turn off I tried, but always there especially the Magnifier start it will be not just off until she start. I have not need it.how I keep them to start at startup?

  Hello

  I suggest you to see link below and check if it helps.

  Disable accessibility options: http://windows.microsoft.com/en-US/windows-xp/help/turn-off-accessibility-options

  Hope this information is useful.