Bluetooth android smart pairs of phone with pc but unable to connect to each other.

Similar Questions

• problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Somasundaram Mohammed. Thank you for your help and maybe you will pass on the solution to all those in need. All that is necessary is to download Bluetooth Stack Toshiba 9.10 and run it. However be careful because version 9.0 of battery is not compatible. I have now my two Android phones connected.

  Thanks again

  John harney

• Cannot print after you load the phone with a direct USB cable connection

  Original title: fails my. driver what should I do, should I get it fixed or can I do it myself?

  I was recharging the battery from my phone with my laptop yesterday but I was with the son of a usb cord, but I put the wires in the wrong place on the charger then my phone could not load more and now my driver is not responding. When I want to print something the printer just keeps showing me document pending and when I use a USB computer does not pick up it at all. I'm not sure if this is the result of charge my phone

  Hello petagayehenry,

  The printer connects through a USB port?

  If this is the case, then I would probably recommend having the unit repaired as all these problems seem to come from the USB port.

  Have you tried another USB port?

  Best regards

  Matthew_Ha

• Pregnant wireless Bose SoundLink has been integrated with success but don't connect/play audio via Bluetooth

  Separated from this thread.

  How did you get your SoundLink Mini system works? I have the same camera, he paired, but does not connect properly.

  I'm not sure it was a while back, but after having revisited the installation instructions, I think I uninstalled it to devices and printers by selecting 'delete device '.  I think that I also removed from the Blue Tooth device section in Device Manager.  I probably also removed the PC as a device coupled to the BOSE by pressing the bluetooth button on top of the soundlink speaker for I think that something like 5 seconds (see Manual)

  I've then matched again according to the instructions of Bose.  Since then, he has worked perfectly.  I think that they don't make it very clear what is supposed to happen as part of the connection process when you want to use the device.  When the computer is turned on, press the power button on the Soundlink.  There is a small white light above the button on the Bose Blutetooth.  It starts flashing and you will get a single "beep" that it connects, the white light is solid and it is connected

  Hope this might be of some use

• Selecting bluetooth watch never leaves sd in walking mode, but look is connected to the phone 6

  Watch isn't providing directions of speech when using map App.  Just text with the vibration appears.

  When you select bluetooth on the watch, he never leaves the research, but the watch is connected to the iPhone 6.

  < published by host >

  JM Bell wrote:

  Watch isn't providing directions of speech when using map App.  Just text with the vibration appears.

  Hello

  Apple Watch does not spoken directions. He uses instead of taps to advise you when to turn.

  More information:

  https://help.Apple.com/watch/#/apdea7480950

  JM Bell wrote:

  When you select bluetooth on the watch, he never leaves the research, but the watch is connected to the iPhone 6.

  This is the correct behavior.

  To check if your watch is connected to your iPhone via Bluetooth, do not go to the home screen > settings > Bluetooth on your watch. This is how to tell the watch to find and pair with other Bluetooth (e.g. headphones) devices. It is normal for the iPhone not matched to being listed there and for the display of report "research."

  Instead, go to the glance of parameters:

  • When you view the time on your watch dial, slide up from the bottom edge of the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected:
    • Connected and a symbol of green phone in the upper right shows that the watch is connected to your iPhone via Bluetooth.
    • Connected and a green cloud symbol indicates that your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • Disconnected shows that your watch is disconnected from your iPhone and is not connected to a Wi - Fi network. The symbol in the upper right corner will be a red telephone with a line through it. The same symbol will also see the top of the watch face.
  • Slide down again to return to the watch face.

• Z5 does support Android Smart Lock? I turned on, but has no effect

  I turned 'Smart Lock' in security settings according to the Google document "set up your device for automatic unlock.

  1. Settings > Security > Trust officers > Smart Lock (Google) > WE
  2. Settings > Security > Smart Lock > Confirm PIN > add a bluetooth trusted devices & a trusted face > activate "detection on the body.

  The document as I mentioned above the numbers on what it will be a circle "pulsed" at the bottom of the screen around the lock icon when I turn on screen after implementation of smart lock.

  But nothing happened. The lock screen is the same as before, even after restarting my phone.

  Why?

  Oh. I think I found the way.

  1. Watch the front camera.
  2. So to lighten the screen.
  3. The lock at the bottom of the lockscreen will change in a face in a very short time. This means that your face has been accepted.
  4. Swipe the top of the screen to lock to enter directly.

  But thank you again, Gandalf

• Headset Bluetooth shows and added to the windows7 pc but couldn't connect to it

  I've added the icon bluetooth headset in my windows7 pc device list. But he could not connect to pc. When I click on my icon of bluetooth headset, no connection option, displays the properties of headphones only. In this case how can I connet my headset bluetooth with my windows7 pc?

  Try to run Microsoft solution easy solution to resolve your concern. Click on this link to download it and run it, and then follow the instructions that appear on your screen.

  If the same thing happens, we suggest that you use the System File Checker tool to repair missing or corrupted files. Click on this link and follow the steps.

• View-PCoIP does not connect on the desktop with ViewPlanner, but does not connect manually

  I saw this mentioned in a few subjects, but I've not seen a resolution.

  I configured a remote view-PCoIP see Planner run profile. The customer and and food Office of VMs on. The Office is a newspaper and connect the client starts the view Client PCoIP. It connects on the view connection server, but not on the desktop. The error message is 'office 'Unknown' is not in the list of desktop titled. (see the folder of the image as an attachment).

  I press the OK button on the error message, start the Client view manually, by using the same credentials see Planner in AD, and I am able to connect to connect to the server, then the virtual desktop computer. The job see Planner runs even at this place (if I don't stop to see Planner first).

  Two days ago, that I was able to run a desktop computer without problem running 10 profile. Since then, I've added several hundred offices at the pool, no other configuration change I can think. The pool is an automatic with floating assignments, office computers are supplied with View Composer. The 'Test' AD security group has the right (see image file).

  I don't understand why see Planner cannot connect to a desktop computer, so that I can do it manually.

  I see the same behavior with a single or multiple, virtual machine run profile.

  Here is an extract from the journal of the unit (all IP addresses are on an area of temporary laboratory, so I really don't like if they are exposed).

  Thanks and greetings

  Wednesday, March 26, 2014 23:17:29 DEBUG add users ['Test_1'] for security AD Group: Test
  Wednesday, March 26, 2014 23:17:29 DEBUG all users added to AD security group: Test
  Wednesday, March 26, 2014 23:17:31 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop: 0, Clients: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
  Wednesday, March 26, 2014 23:18:19 registration of new customer INFORMATION: 10.128.33.73
  Wednesday, March 26, 2014 23:18:19 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 0]
  Wednesday, March 26, 2014 23:18:20 new INFORMATION server registration: 10.128.33.132
  Wednesday, March 26, 2014 23:18:20 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 1]
  Wednesday, March 26, 2014 23:18:20 INFO get the IP address Office VM-1 of VC
  Wednesday, March 26, 2014 23:18:21 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop computers: 1, customers: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
  Wednesday, March 26, 2014 23:18:30 INFO get the IP address VM VC client1
  Wednesday, March 26, 2014 23:18:30 INFO got the client1 virtual machine IP address: 10.128.33.73
  Wednesday, March 26, 2014 23:18:30 INFO get the IP address Office VM-1 of VC
  Wednesday, March 26, 2014 23:18:30 INFO obtained IP address for the virtual office-1 computer: 10.128.33.132
  Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.73-> name: client1
  Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.132-> name: office-1 computer
  Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State = 'Unpaired', name = 'computer office-1 "where IPADDR = '10.128.33.132'".
  Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '1' hostinfo, State is 'Unpaired', name = 'client1' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:18:30 INFO registration remaining VMs
  Wednesday, March 26, 2014 23:18:30 reached the threshold of the INFO for the number of machines... The plan of starting reference...
  Wednesday, March 26, 2014 23:18:30 INFO waiting for virtual machines to settle and sleep during the time scale
  Wednesday, March 26, 2014 23:18:40 DEBUG of waiting for prefixes map to be extracted from Server view...
  Wednesday, March 26, 2014 23:18:41 INFO function call right with arguments: (pools: [], domain name: domaine.net, groupnames: ['Test'])
  Wednesday, March 26, 2014 23:18:41 groups of security of the object DEBUG AD ['Test'] to the office pool
  Wednesday, March 26, 2014 23:19:10 INFO assigning client-server for 1 pair
  Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:19:10 INFO query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('PCoIP-1VM', '10.128.33.73', '10.128.33.132', 'View-PCoIP', 'Test_1', "passw0rd", "waiting", '2014-03-26 23:19:10 ', 2)
  Wednesday, March 26, 2014 23:19:10 request information: SELECT * from testinfo where testname = 'PCoIP-1VM' and test_state = 'pending' and ClientIP_FK = '10.128.33.73' and ServerIP_FK = '10.128.33.132. '
  Wednesday, March 26, 2014 23:19:10 INFO -.
  Wednesday, March 26, 2014 23:19:10 INFO launch the execution plan for the run profile
  Wednesday, March 26, 2014 23:19:10 INFO -.
  Wednesday, March 26, 2014 23:19:10 DEBUG begins to gather statistics periodically VC...
  Wednesday, March 26, 2014 23:19:11 INFO from the workload for all assigned pairs...
  Wednesday, March 26, 2014 23:19:11 INFO remote command running on 10.128.33.132 machine: Logoff
  Wednesday, March 26, 2014 23:19:11 command run on the remote computer INFO: Logoff
  Wednesday, March 26, 2014 23:19:11 INFO wait until all desktop computers have disconnected
  Wednesday, March 26, 2014 23:19:21 INFO continues the race after waiting
  Wednesday, March 26, 2014 23:19:21 INFO looking for name of the cluster for computer office-1
  Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:19:21 request information: UPDATE SET = '1VM-PCoIP' test_name testinfo, Protocol is 'View-PCoIP', name of user = 'Test_1', password = 'Q1w2e3r4!', test_state = 'Running', start_time = "2014-03-26 23:19:11" where test_id = 2837
  Wednesday, March 26, 2014 23:19:21 INFO running commands remotely with args: customer: 10.128.33.73, server: 10.128.216.88, Protocol: view-PCoIP, test_name: PCoIP-1VM, vmuser: Test_1, vmpasswd: Q1w2e3r4!, workprofile: {'IEbpm': 1 L, 'ARbpm': 1 L, "Thinktime": 2 L, "name": "StandardBenchmarkProfile_1i", "hosttime": 1, "random": 1, "iterations": 1 L, 'OMP': 60 L, 'video': 2 L, 'applist': ' WORD, ACROBAT, IE_APACHEDOC, EXCEL_SORT, 7ZIP} {, PPT, FIREFOX, OUTLOOK, IE_WEBALBUM, VIDEO '}, poolname: unknown, domain name: TMIOCONTROL
  Wednesday, March 26, 2014 23:19:21 INFO by adding the callback function for the remote root object to ipaddr: 10.128.33.73
  Wednesday, March 26, 2014 23:19:21 INFO added reminder for the command startWorkload on the client 10.128.33.73
  Wednesday, March 26, 2014 23:21:02 INFO connection started from the client: 10.128.33.73

  I think the name conventions 'computer of office-{n}' and Office-{n}"may be causing the problem. Can you try just to office-{n} and go to View server, open a command prompt and then run "python c:\listener.pyc" and after the release?

• C168i: unlocked from at &amp; t, but unable to connect to the network with the new SIM card

  I brought my c168i from the USA and I can't use it in my home country. I unlocked the phone to at & t, but it connects to the local network with the new SIM in there. It shows "not available" or "no service". What is going on??

  If you look at Australia GSM worldwide site, you will see which bands are available in your area. If the bands including the phone does not match the country you are located in the phone up with will not get service. Not all bands are available in all areas. In my view, that the phone only has GSM 850/1900 GPRS. This would mean that you get only service when GSM 850 is available that I don't see 1900 in Australia.

  Mark

  Support Forums Manager

• Can share files with the XBox 360 to Windows 7, but unable to connect to Windows Media Center

  I reinstalled my system of exploitation of 64-bit Windows 7 to Windows 7 32 bit and reinstalled the documents to the user and the location of the program on a separate hard drive data. I was able to add both my XBox 360 on Windows Media Center Extender at least 15 times before that, but it's the only time wherever I reinstalled with 32-bit and moving the location of the documents to another drive (even if I still have them settle there but just by changing the location under properties after the operating system is installed).

  When I try to add the Xbox 360 as an Extender, it goes up to like making up the 'contact' on the Xbox loading screen, but then the Media Center on the PC says something in the sense of "Windows Media Center has encountered an error... »

  Anyone can shed some light on this situation?

  Hello
   
  You can try to reset Windows Media Center, see these steps.
   
  (a) click Start
  (b) open the Control Panel, then programs and features.
  (c) click on "Tor disable features of Windows of the URN"in the left pane.
  (d) develop "multimedia functions", uncheck "Windows Media Center". Click 'Yes' to continue and click OK to exit.
  (e) and then restart the computer.
   
  Once the computer is restarted, perform the following steps.
   
  (a) reopen 'or turn off Windows features turn on'. Enable features. "Windows Media Center". Restart the computer.
  (b) launch Windows Media Center, initialize program.
   
  Check if the problem persists.
   
  See also:

  Windows Media Center Extender: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Use a Windows Media Center Extender

  http://Windows.Microsoft.com/en-us/Windows7/use-a-Windows-Media-Center-Extender

  Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Optimize your home network for Windows Media Center Extenders

  http://Windows.Microsoft.com/en-us/Windows7/optimize-your-home-network-for-Windows-Media-Center-Extenders
   
  Check if it helps.

• Satellite P750: Unable to connect to the other PC with WLAN

  Satellite P750 was working fine until yesterday.

  Today, when you use the Atheros AR9002WB-1NG wireless adapter I can't connect to the other pc on the network.
  However, I can connect to the internet ok.
  Other pc can not see me either.

  * When I use wired everything is ok *.
  I tried to stop the antivirus and firewall, but it made no difference. I reinstalled the drivers and etc. shares checked file.

  Can anyone help please?

  Hello

  You should enable the option called Ad-hoc to peer option in your WLan settings!
  Go to network connections
  Select connections-> properties-wireless
  Add the new network
  Here you must configure this (insert SSID, encryption, and password), and don t forget to check this is a computer-to-computer (ad hoc) network

• BlackBerry Smartphones bluetooth pairing phone with Jaguar XF

  I am not able to pair my phone with my car Jaguar XF.  I have an older BlackBerry with additional software.

  Alonesoul, when your pair is done, is it your alphebatically sort of address book? my boss had the 8310 and its address book sort alphebatically but when it improved the 9000 the thing just decided to cancel the alphabetical sorting, any ideas?

• Unable to connect with the PC tab

  I bought a Ubislate android 7 C + from Datawind, but unable to connect with the computer

  Burnersalvation,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. what happens when you try to connect to the tab?

  3. How do you connect tab to the computer?

  To connect to Android Ubislate to the computer, it may require some software to install on the computer provided by the manufacturer of the tab. Then I suggest you to contact the manufacturer of the tab to get help on this issue.

  Check out the link:

  http://www.ubislate.com/contact/index.html

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Unable to connect through bluetooth device

  I have windows 7 basic, lenovo core i5 and after filming bluetooth adapter WE... but unable to connect to my phone from nokia bluetooth and also cannot add bluetooth device... ? Help, please... thanking you... Big Boss-

  Hi Big Boss,

  1. do you receive an error message or error code when connecting Bluetooth devices?

  2 have you made changes on the computer before this problem?

  This problem occurs because of Bluetooth settings, try the following methods and check if it helps.

  Method 1:

  Check the status of the Bluetooth Support Services.

  a. Click Start, type services.msc and press ENTER.
  b. double-click on Services to Support Bluetooth.
  c. set its startup type to manual
  d. click OK.

  Refer to the steps in the following Microsoft article.

  Change settings for a Bluetooth compatible device: http://windows.microsoft.com/en-US/windows7/Change-settings-for-a-Bluetooth-enabled-device

  Method 2:

   

  Connect to Bluetooth and other wireless or network devices: http://windows.microsoft.com/en-IN/windows7/Connect-to-Bluetooth-and-other-wireless-or-network-devices

  Keep us updated on the status of the issue.

• How pair iPhone 6s with Bluetooth headset (AYL) wireless

  First experience with a headphone wireless Bluetooth (AYL).  Paired with the iMac.  Trying to pair with iPhone 6s.  Phone Bluetooth enabled.  The headphones are on.  Phone to turn the circle and any listed device.  Instructions say to make sure that the headphones are "visible" to the phone.  How?

  Took the phone and the headset.  Still the circle of rotation (which went in the preferences system, Bluetooth selected, on) what to do next?

  You have to put the headset in pairing mode according to the manufacturer's instructions. If you no longer have the instructions, check out their site. You can ensure that the headphones are not connected to the Mac.