Bluetooth connect only to the Beats Studio wireless for 8 sec and no option in the audio settings.

Any advice?

Bluetooth connects to headphone listening Beats studio, but only for about 8 seconds and will not appear as an option in the settings of the sound or airtime. MBP 2011 using a dongle usb so I can use bluetooth 4. I tried with another pair of headphones bluetooth and same problem. Bluetooth dongle is comparable with my Mac Mini (2011). I use a thunderbolt to a display connection because the screen is cracked. The usb dongle is this: https://www.amazon.com/gp/product/B00F85ZPIY/ref=oh_aui_search_detailpage?ie=UTF 8 & PSC = 1

(tried reseting the PRAM and deleting BTpreferences (.plist))   Thank you

Try to reset the BlueTooth module

Keep the change option keys > BlueTooth icon at the top right > debug > reset

Tags: Mac OS & System Software

Similar Questions

  • Beats studio wireless connection problems

    Hello, I recently bought Beats Studio Wireless and when I listen to music on my iPad connected to bluetooth and 40 centimeters of the iPad, the connection suddenly stops. This happens whenever I have change the song and now it does not connect even...

    Thank you for your understanding!

    b

  • Beats Studio Wireless does not charge

    Hello

    So I bought my beats studio wireless in July (2015). A few months later, part of them broke and I got a new pair of beats. I made sure that I take great care of them now... I rarely even take them out of the House. A few days ago, they broke again. When I hook them up (Yes, I tried several takes and multiple cables) beats are no charge. When I plug in, no lights go at all, as if the beats do not recognize the cable. I also tried to reset several times, but still, they are out of the battery and won't charge. The lights still work, because when I reset them they are blinking, and when I try to turn them on they flash red.

    Someone at - it solutions? I don't know if I can still use my warranty, since I used it once already. As I said before, I took good care of them.

    Thank you!

    I called apple support and they replace them.

  • My new airport does not detect my existing WiFi network, I can connect only via the LAN.

    Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

    Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

    You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

    If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

  • I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

    I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

    Windows: Tools > Options > advanced > network > settings
    OSX: Firefox > Preferences > advanced > network > settings
    Linux: edition > Preferences > advanced > network > settings
    Set your settings to connect to the 'No proxy', if you are not using a proxy.

    Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

  • Cannot access the audio settings

    Hey everybody. Today I plugged my headphones in and waited for chip connect disable audio clear more because it's hurting my ears with headphones... He didn't do it, I tried to turn off manually but I couldn't access the audio settings in the music app... He just wouldn't do anything when I clicked it, then he said this: https://www.dropbox.com/s/c7drv4nf6o0pydg/Screenshot_2015-09-22-13-34-25.png?dl=0 and when I go to settings, audio, audio settings, it still says the same thing... I need help, I restarted my phone like 5 times to no avail... And I checked the running applications, and there is nothing that would make this...

    Thanks in advance

    Hello raul, it seems that you have downloaded an app enchancing equalizer or sound that prevents you from using the audio settings by default. Please check the app and delete it and try again.

  • How to reset the audio settings?

    I frequently use Skype to chat with my friends, and recently, I accidentally changed an audio setting origin of Skype to play strong rediculously out of my helmet or not to use my headset at all. I tried to change the setting back, but it did not work. Is it possible to reset the audio settings in Skype?

    I'm not sure what could be the problem, but you can always re-install Skype and use this opportunity to upgrade to the latest version.

  • Beats Studio Wireless - Device missing Bluetooth for Windows 7 64 bit OS drivers

    I have a HP Elitebook 9480 m notebook, running Windows 7 Enterprise 64-bit OS.  I just got this machine and my previous machine was running Windows 7 32 bit OS.

    My problem is that when I go to install my wireless on the Elitebook Beats Studio headphone, it does not find the Bluetooth device drivers.

    I called Apple support (now support produced Beats), contacted HP support and visited with my COMPUTER service company hoping to copy the drivers through my old machine (helmet worked on an old machine) and no solution has been found.

    Copy the drivers through did not work as my machine would not find them when we asked it to look for them.  We have, however, learned that the driver that was used on my old machine was a Microsoft driver, specifically the pilot called btwavdt.sys.

    I need an updated version of this driver, or the equivalent of 64-bit if it is not already compatible with 64 bit computers, in order to properly install my helmet.

    Any help would be greatly appreciated.

    Hi John,.

    Thanks for posting your query in Microsoft Community.

    Since you're using Windows 7 Enterprise edition of the operating system, your question would be better suited for the IT Pro audience. This is why I would recommend posting your query in the TechNet Forums.

    Please post your question in the TechNet Forums.

  • Second laptop connect only with the guest account

    I have an E1500 which replaced a broken WRT54GS. I have a desktop office computer using the ethernet cable to the Internet via a DSL Modem and I have two other laptops, one is a Macbook Pro running Lion and the other is a Toshiba running WinXP SP3 using two Wi - Fi connection. Before installing the E1500 all three computers were able to connect to the internet via my secure connection, but now with the E1500, I can get the Mac to connect using my secure WPA2 Personal connection and the Toshiba will connect through the guest account. I lived the configuration wireless for the Toshiba providing several times I put in good properties wireless and network key, but it does not connect. The process of connecting Macbook was a blink of an eye without any problem. I also get Windows XP wireless connection properties back to default (WEP), because it will not hold personal WPA2 settings, but even if it contains personal WPA2 security settings it does not connect. I was also able to connect the Toshiba with the ethernet cable, without going through the wireless network.

    Why can I connect via the guest account and not via my connection on the Toshiba? Help someone?

    Thanks for the detailed explanation.

    I had actually just this solved tonight with about 2 hours of chat with Linksys. It turns out the Windows SP3 XP Toshiba doesn't have a true WPA2 - Personal encryption, only the WPA - PSK (pre-shared Key), while the Macbook Pro has WPA2 Personal. The whole system runs on a hexadecimal code 63. I got the router located on only WPA2 Personal. When I changed (manual) WPA/WPA2/joint, then I had two computers on the network. But then came another problem, when I connected with the Macbook, Toshiba has lost its connection with an error message - "IP address conflict with another system on the network. That proved to be the setting of the channel on the network. The channel was not sync from the old Linksys router configuration. Changed to channel 11 on the router to synchronize with the Macbook Pro and that has been resolved. There is no option for channels on the Toshiba that I can find.

  • Bluetooth connection problems with the recent update of IOS

    I recently updated my iPhone 6s with IOS 9.3.1 update. Since then, my phone calls are inaudible in my car with my Bluetooth. I deleted the device in my car and turned off and restarted my phone, but my iPhone is not discover the Bluetooth in my car. Any ideas on a fix?

    Sorry, I can't offer a solution but I wanted to get this thread to keep up-to-date.   You aren't the only one with this problem.  I have an iPhone 6 s + and with IOS 9.3.1 update, calls I am doing in the completely distorted sound car.  Also appears that Bluetooth is disconnection/reconnection intermittently.

    Just found the problem today so I did not go through the process of removal of device re-matching, etc.

  • I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

    I have a problem with the canon 5dsr with Lightroom 6 connection

    I can't drop images directly in Lightroom

    The camera connected only by EOS utility

    Help, please

    Hi mateuszm,

    You cannot drop images directly in Lightroom.

    You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

  • TVos 10.0 connects not to the audio from the airport

    Since I've upgraded to the latest AppleTV (about a year now?) I had to browse the audio airplay on my airport because connecting the HDMI cable directly in my system Pioneer VSX 1020 Surround THX certified cinema makes the freak out of the unit and quickly scroll well some input devices, resulting in a cacophony of strong gusts of random audio sources.  My job, as long as I've owned the thing, was to plug the HDMI directly to the TV and run the audio through the airplay of the airport that connects to this same system surround as my input source "iTunes" for my iPad Pro, iPhone, Plus 6, Mac Mini and MacBook Pro (s).

    I upgraded to tvOS 10.  last night and now, even that does not work.  You can select in the settings, but as soon as you leave, it is default to the direct connection of HDMI on TV never inviting to enter the password for Airplay.  Anyone know of a work around for my solution to workaround for this wonderful device that has been damaged since its inception?

    Hello. Can you try disabling the AirPlay password? In addition, your TV has a (possibly optical) audio output which you could feed the surround system? Or does have a HDMI with ARC port that would work with the system? Turn off the TV and receiver control in ATV could make work more happily with surround sound.

  • When you try to put a movie on movie maker file I only get the audio clip without images?

    I have windows XP and movie maker and windows media player does not reconise filmed I take or movies.

    This message appears: Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. To resolve the problem, try to repair the link or the removal of the item from the library.

    I know that all the cables are in and have played against them using the program of the anther, but I want to use windows?

    can you help me?

    Mike

    This happens usually when the video file has
    compatibility problems with Movie Maker.

    You can try the following steps but more
    probably, you will need to convert the file to the
    WMV format to make it compatible.

    Reach... Tools / Options / Compatibility tab and
    left click Restore values by default all the button / OK

    No improvement? Try to convert it to WMV.

    There are many converters available on the net... some
    free... some detail.

    The following freeware converters are a few examples:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    (1) Sothink Free Video Converter
    http://www.Sothinkmedia.com/video-converter/
    (Windows XP / Vista / 7)

    You will need to unzip the file... or you could just drag
    the Setup.exe from the file out of the folder and drop it on your
    desktop and install from there.

    Once installed... Open Sothink and go to... Add the files button...
    Find and select the clips you want to convert.

    Next... in the encoding settings... Choose... Video credits.
    WMV - Windows Media Video (*.wmv).

    Choose an output folder and on the left, click on the button convert.

    You can experiment with other settings later but
    This should help you get started.

    (2) format Factory (freeware)
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup270.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)
    (Windows XP / Vista / 7)

    First, you will need to decompress the file or just open the
    Drag FFSetup270.exe out of the folder
    and drop it on your desktop. To install left click.

    Next, after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your video clips on the main screen...

    Select "all to WMV" / OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck...

  • Satellite A300 - error occurred in the audio settings

    When I try to watch a DVD or movie files from an external hard drive using a TOSHIBA DVD PLAYER, it finds the file or good movie starts to play and then an error message pops up saying to what follows - * an error has occurred in the Audio output settings. Please check audio driver is implemented properly.*

    I want to know how to access the audio driver to check the settings. Any help would be appreicated.

    See you soon

    Dale

    Hi Dale_S,

    It depends on the sound card you have, but normally you can access the settings through Control Panel > Realtek sound effect Manager.

    As the error already say you could also try reinstalling the driver. It only takes a few minutes.
    In addition, it would be interesting to know if this happens with other players, like VLC media player.

  • How can I save the audio settings for a USB device on all USB ports?

    I have a USB minimic and need to trigger the MCO. However, if the device is disconnected and reconnected, or plugged into different USB, settings are reset. Is it possible to configure the settings of the USB device on all USB ports?

    Hello

    See this link:

    http://forums.Logitech.com/T5/USB-speakers-read-only-archive/how-to-setup-a-USB-audio-device-in-Windows-XP/TD-p/292846

    http://www.NuForce.com/HP/support/USB-audio-setup.php

    http://www.von-phone.com/audio-settings-USB-phone.php

    LTE, we know the results.

Maybe you are looking for

  • iPad, Apple ID, makes me crazy!

    I'm about to launch an iPad (little used) MD370NF/A out the window! This morning I have updated to OS 9.3.5. After that, I discovered that there are two Apple ID involved, one for iTunes and AppStore (Apple ID, I also use on Mac Pro, iMac 3 1 and 2 M

  • NB100-127: Bluetooth Module does not work

    Hey all. I had an old netbook to my dad nb100 - 127 model No. PLL10e-00Y007AR. I installed a larger hard drive and also within the 2 GB of ram. Also, I installed windows 7 spinning round. During the installation of the hard disk, I noticed a place an

  • Electric circuit of Satellite A500 - 1 GM touch touchpad and USB box

    It is intermittent, but I seem to be able to create a current through my fingers of two buttons on the front of the touchpad. Current configuration of the plug is like this:-Dispatcher 4, including plugged in the laptop and plugged in an external har

  • Airports of stranger appearing in my Airport utility

    Recently, the Airport app utility opened automatically at the start of my Macbook, to show me that an airport needs an update. The problem is that the airport is not mine. It shows 4 airports and only 1 in mine. It started only recently and was not l

  • How can I move files from drive c to h drive?

    moving files from c to h drive