Bluetooth connection series.

Similar Questions

• Multiple simultaneous Bluetooth connections

  I want to apologize to reproduce my post in another section here, but it seems that here my question would be more appropriate:

  Is it possible for a Blackberry smartphone to function as a Master of Bluetooth in a Bluetooth PAN/piconet? In other words, it can open several ports series to accept/send data from/to several Bluetooth devices at the same time (of course it is not literally simultaneous, time interleaving in the reception/transmission processes effectively reduce the bandwidth for each link).

  I am interested in having a continuous data BB device gains two Bluetooth - permit sensors that constantly streams of data through SPP/RFCOMM. A BB device would support such a scenario? I tried to test this scenario with the Blackberry Simulator, but the Simulator isn't compatible Bluetooth . I don't currently have a BB device to test this on, but I don't want to buy one and then find out that what I want to do is not applicable.

  I was not able to find an appropriate response to this question, and I guess there are some developers who would be very happy if they could have an answer on this. Therefore, I would be very happy to help/clarification of one of the main developers or administrators of the forum that could shed light on this... ;-)

  Is that someone who actually owns a BB device might try to get the next property that returns 'the maximum number of devices supported:

  LocalDevice.getProperty ("bluetooth.connected.devices.max");

  you just need to: import javax.bluetooth.LocalDevice;

  In case, this property returns something greater than 0 or 1, then I can assume that several (up to 7 normally) simultaneous Bluetooth connections can be supported, in which case the available bandwidth would be shared between clients connected to the BB Phone, allowing all the function & communicate simultaneously.

  I would be very grateful to anyone who could try this for me... (the above statement always translates into a NullPointerException in the Simulator)

  As it can be seen in my post about it:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=9500&message.ID=37539#M37539

  a BB device "BOLD" (that's all I can say for sure) is able to communicate with multiple devices Bluetooth SPP/ports simultaneously. The only thing that is needed, is to start a new thread to configure and monitor all serial ports.

• Telechareger 6.2, HotSync don't see Bluetooth connections, Vista 64-bit option

  I got a new Dell Studio XPS with Vista Home Premium 64 - bit and discovered I couldn't sync USB with my Treo 755 p (Verizon). Since bluetooth sync has been recommended, I bought a Micro USB 2.0 Bluetooth IOGear GBU421-adapter and allowed the device to Windows search. When you are prompted by Windows to insert the disk to install the driver, I went on the Web of IOGear site and downloaded the latest software (WIDCOMM bluetooth software 5.5.0.4400 version released on 11-03-09 for Windows XP & Vista, 32 & 64-bit). Before installing this software, I had done a 'clean' uninstall of all Palm, such as ordered in these forums and did a restart of the computer. I installed the bluetooth software & configured to be 'discovered' and restart another. Finally, I downloaded Palm Desktop 6.2, installed and rebooted the computer again. However, HotSync Manager doesn't see Bluetooth as one of connection options. My Treo 755 p "sees" the computer when setting up bluetooth. Y at - he hope that I am able to synchronize this computer with my 755 p or am I forced to seek another smartphone? Any suggestions would be greatly appreciated. Thank you.

  bonz1973: it worked! I am so relieved & happy after so many hours of frustration. I want to thank very you much for your reference to the messages #353 & #354 on 'Vista 64 Hotsync solution!' I want to share my experience that can help someone else. My comments are in brackets [] and take off those edwardek.

  1 installed Palm v4.2 [I have found that I don't have to do]

  2 installed Palm v6.2

  3 installed Palm Outlook 2007 [did not this part either since I'm using Outlook 2003]

  4 installation Bluetooth apps

  5. Insert the... dongle into the USB #6

  [edwardek claims that he needed to use the USB #6 but my computer does not have a USB #6. Instead it divides many ports USB Hubs. What ' is more important that some software implements the Bluetooth to transmit on a COM port Mine was COM3. Films to see how your software installed adapter your Bluetooth device, see the Device Manager in Control Panel. It does not list "Bluetooth devices" where you can find the device, right click, choose Properties and see what the Bluetooth adapter USB port is in. However, Device Manager will appear also my Bluetooth under "Network adapters" and "Ports (COM & LPT)" which is important, because I had to configure HotSync using the serial port COM3. I think it depends on the Bluetooth software you get.]

  6. in your status bar (at the bottom of your PC screen) PC, right-click Hotsync Manager and select 'Settings' [Yes, you must configure your computer HotSync method.]

  7. wait for a long time (2 minutes) and of HotSync Manager window will appear. Because window click on 'Sign in' and when the window opens, click on "USB" (a check mark then), and then click COM (a check mark appears), under the present, you will see a menu drop-down pick list showing all ports. Select COM6.

  [I don't have to wait at all HotSync display.] Yes, check the USB connection or connections series and at this point, a dialog box shows that the serial connection is COM3, corresponding to what was in the Device Manager. I suspect that some software actually creates a Bluetooth option that appears in the list of connections such as specify the instructions of PALM. [My software has not implemented the Bluetooth device is in this way and so I was totally frustrated of not find Bluetooth on the list of connections.]

  8. then configure your Bluetooth application and make sure that it is paired with your Treo (I assumed that everyone knows how to do that, but basically, you ensure the Bluetooth application sees your Treo (your name) and your Treo sees your PC (the PC name).) [Before this step, you configure your Treo therefore Bluetooth is ON and VISIBLE and you can see your computer as a device. I had a shortcut in my Bluetooth software in the PC bar next to the HotSync icon. [Once I had defined for USB connections and series to step 7 and the Treo is configured to be Visible, the computer saw my Treo using the name I had given him the Treo.]

  9. in your Treo start the HotSync, then on your Bluetooth application (Bluesoleil) made a right click on the Treo device and select Connect. You should then see if the 2 devices are connected and that the Exchange begins. [Yes, start the HotSync from your Treo.]

  It worked for me and I hope this helps you synchronize your Treo and your 64-bit Vista. Thanks for everyone's input and help.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Bluetooth connectivity on iOS 10 issues.

  Given that I have updated to iOS 10, my 6 s iPhone more does not properly connect to my car - 2007 BMW 530xi. I had no problem before updating to iOS 10.

  MY phone shows that it is connected and so does my car. However, my phone calls are abandoned at the beginning of the conversation. I answer the phone through my car, but it won't work for some reason any. Then I try to change settings of the speakers in my car on my phone back to my car nothing helps.

  Please do not ask me to try simple troubleshooting stupid as I did. I used iPhone and products Apple specifically for the iPhone 4. I know what I'm doing. It is only fair that iOS 10 broke some internal features regarding the Bluetooth connectivity.

  If anyone else has similar problems with their 10 iOS Bluetooth not connecting, please state so that Apple can precipitate a quick update. I can not even use my Bluetooth in my car which is very frustrating as I drive a lot for work and won't put on a helmet or something else on my ears while driving as it is useless for me.

  I have EXACTLY the same problem. For me, it's a 2016 X 3, but the behavior is the same. Devices think they are connected, but are not in force.

  I have reset my network connections, I disconnected and reconnected manually and some other stages of trials and errors. None have assimilated to the sustainable, stable connection I had with iOS 9.

• Bluetooth connect only to the Beats Studio wireless for 8 sec and no option in the audio settings.

  Any advice?

  Bluetooth connects to headphone listening Beats studio, but only for about 8 seconds and will not appear as an option in the settings of the sound or airtime. MBP 2011 using a dongle usb so I can use bluetooth 4. I tried with another pair of headphones bluetooth and same problem. Bluetooth dongle is comparable with my Mac Mini (2011). I use a thunderbolt to a display connection because the screen is cracked. The usb dongle is this: https://www.amazon.com/gp/product/B00F85ZPIY/ref=oh_aui_search_detailpage?ie=UTF 8 & PSC = 1

  (tried reseting the PRAM and deleting BTpreferences (.plist))   Thank you

  Try to reset the BlueTooth module

  Keep the change option keys > BlueTooth icon at the top right > debug > reset

• Music Bluetooth connection while the execution is HORRIBLE

  I've had my Apple Watch - sport watch 42 original - since the date of launch.  I use it all the time.  But from the beginning, I have known a glaring problem and a huge inconvenience: if I try to listen to music via bluetooth to a BT Headset activated during the running/jogging to Apple Watch, transmission is atrocious.  The music signal / autour jumps, there are 2-3 second lag, the signal falls completely, etc..  It does not work perfectly.  And the issue is NOT the BT headset.  The problem occurs on each BT headset, I tried: Dear and low-end models.  These same BT headsets work absolutely perfect w / my Mac and iPhone.  The problem is the watch...

  You can imagine how frustrating is: who wants to listen to music from the Apple Watch for BT headphones when he cut and in a few seconds.  So now, I end up using the Apple Watch to track my physical condition, but am forced to lug along my iPhone if I want to listen to music.

  Here's something very revealing on the signal low/inaccurate bluetooth from the Apple Watch: if I sit stationary or walking like a robot without arms or by moving the head, streaming works much better.  But this isn't a solution.

  How can I fix it?  Is it even fixable or is it just another glitch in the post World Steve Jobs...

  My brother-in-law has the same w/his Apple Watch BT problem whenever it tries to use it as a source of music during the race...

  Hello

  It is a known problem.

  It's frustrating, and it should be fixed. I have experienced the same problems myself.

  You can report it directly to Apple via Twitter: @AppleSupport

  Only one of the thousands of complaints across multiple sites to support > Apple Watch and the Bluetooth connection is terrible during my career.  Anyone else having the same questions?

  You can also provide your comments here > http://www.apple.com/feedback/watch.html

• you see only not texts in car bluetooth connection

  My husband recently got an iPhone 6 Plus.  In his Mercedes Benz bluetooth connection work and it can make and receive phone calls via his iPhone. However, it gets more texts displayed on the screen of the car.

  Previously, with his phone droid, there was no problem.

  Is it possible to get his text messages is displayed on the screen of the car?

  Apparently the texts on the screen of an iPhone are not compatible with his car. The concession and ask.

• Poor wifi and Bluetooth connectivity after iOS 9.3.1

  9.3.1 IOS is installed on my iPhone 6 wifi in my house guard fall!

  My Bluetooth connectivity keeps cutting to work! So annoyin!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Satellite T130-11U, lost the Bluetooth connection after installing Mobile Broadb

  I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
  Then I installed my broadband Mobile (operator TMN) and lost the Bluetooth connection.

  There must be a way to overcome this 'conflict '.
  Anyone with the same problem?

  Thank you.

  Hello

  Perhaps this 3rd party application is not compatible and that is the reason why this happens
  But first, you should check if the Bluetooth is always enabled

  In addition, you should check if this issue happen after installation of the new BT stack

  Here you will find the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• Qosmio G20: Problems with mobile phone Bluetooth connection

  I am sure I posted this question a couple of days, but it seems to have disappeared. Anyway.

  I'm trying to connect my phone Nokia (N95) to my G20 via bluetooth, however every time I try to put in place the bluetooth software insists on trying to set up the phone as a modem. Now, I don't want it as a modem, just to connect while I can symchronise and save things, but I can't seem to find a way to set up the connection without the application process for the modem settings.

  If I have to configure the settings of the modem then it connects ok but fuck my internet connection to the site and if I disconnect the modem connection in IE my bluetooth connection disconnects as well.

  Can someone tell me what I am doing wrong?

  Thank you very much

  The installation of the Nokia Suite program is normally pretty simple. You must put in place by the Nokia Suite itself and not with the Bluetooth stack. Make sure that Bluetooth is running. A look at some similar HowTo on the following Web site might be useful:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• The Bluetooth connection is not visible on the Satellite A100

  Hey,.

  I have a Satellite A100-797.
  The laptop had Vista Home Premium pre-installed.
  But I have upgraded to Vista Business (32 bit).
  Now my problem is that in Flash cards, the Bluetooth connection is not visible.
  If I press the F8 key on my keyboard, the menu appears when I normally can I enable / disable WIFI and Bluetooth.
  But only WLAN is now visible. I installed all the packages in the driver s page. And I am sure that those who are the most recent.

  Can someone help me please?

  Thank you
  Mathijs

  Hi Mathijs

  Thanks for your second assignment and useful comments.

• Tired of fighting on Macbook Pro bluetooth connectivity

  Why is that to connect one of my bluetooth speakers that first of all, I have to restart my Macbook?  It will simply not acquire a bluetooth speaker without this annoying step.

  So, I'm the only user in the support forum with a bluetooth connectivity problem?

• Tecra S2: No bluetooth connection is possible - why?

  Toshiba Tecra S2
  Model PTS20E-18S032GR number
  purchase 30/01/2006

  There is no bluetooth connection possible. I have the connection in front of the laptop button 'ON' and the hodkey + F8-online bluetooth support 'ON '. But I have every time an error with the 'Bluetooth Manager (v3.01.03)' bluetooth software-online button 'new connection '.
  Error message: "Bluetooth is not ready."

  I can not connect a practice or a Bluetooth headset. I made a mistake, or I forget somethink?

  Hello

  AFAIK that Bluetooth is optional on the Tecra S2 and is depending on the model purchased.
  The switch at the front of the laptop is a wireless communication switch, and it has nothing to do with a Bluetooth device.

  In my opinion, you should check if the Bluetooth is available on your device. Check the Device Manager. You can also check the bottom of the unit. There you should find a Bluetooth label. If the label is available if the device has Bluetooth