Bluetooth does not start at the L850-BJS Satellite during the installation of Flash cards

Similar Questions

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• XP Home Edition does not start without the installation CD after reinstall.

  I reinstalled XP Home Edition on my PC without formatting the drive first in order to keep all of my data.  I have installed all service packs.  However, for some reason, I had to call Microsoft to get validated.  The only problem I have now is that it does not start without the installation CD in the drive.  I have XP on the half before the C drive and me on the back of half.  The reader is a digital WD800JBRTL of Western.  Well it worked like that for years. Why can I now not start without the CD?

  HiNeal2660,

  It seems that the NTLDR file is not on the C: drive. NTLDR is the boot loader for all versions of Windows.

  You can perform a Windows XP repair installation & check if you are able to start normally.

  For more information, please visit this link: perform a repair Installation

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Satellite U200-179 often does not start after the installation of Ubuntu Live CD

  I'm installing Ubuntu edgy on my new computer toshiba laptop U200-179.
  I install linux without problems from the live CD, but when I try to restart the pc, often it does not start.

  During booting linux runs the utility to check the file system, although it seems that everything is ok and the boot stops.

  I also tried a different distribution (Knoppix 5.01), but with this one, the installation process stops at the beginning.

  What could be the problem?
  Luca

  You have upgraded to the latest version of the BIOS available (3.30)? The previous (2.40) had problems with some Linux distributions...

• H8 - 1280t - QC461AV #ABA: desktop HP - computer does not start after the installation (Windows 10) video card

  So, I just bought a new video card an XFX R9-390 and a new HX1200i POWER supply corsair (overkill ik ) that I put on a card mother IPIWB-PB for my 3 years old HP PC, and the new stupid video card is not working. the PC just does not start, I see is a black screen. My monitor is an HP 2311gt and I can't use my computer with the old video card no probs, BUT whenever I have to install the new card does not detect my monitor just and I only see a blank screen. I HAVE NO IDEA HOW I'M DOING. Help, please

  PS. I have RMA the new power supply and the video card and they got to check and send back to me, so I know that the two pieces of equipment are working very well AND of course I am currently using my PC with the old video card

  Wiraqocha, here is the link to start safe for HPs with Win 10 and instructions to enter the BIOS. It may be useful:

  HP PC - secure boot (Windows 10)

• Satellite A300-15 a does not start after the installation of the alcohol program

  Hello...

  Satellite A300-15 has, I bought yesterday and after completing the installation of Vista, I tried to install "Alcohol" but my judgment of the laptop and now I'm not able to boot up the laptop.
  It does not start in any mode.

  I forgot to make recovery disks. I think that alcohol is not compatible with Vista. Error I get is below.

  Can someone tell me the solution?
  Please help urgent

  "A problem has been detected and Windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

  Looks like a problem familiar to me, as I had the same one with the Daemon tools. After installing these tools, I couldn't start my Windows XP. I guess that it somehow mixed upwards of some drivers or registry entries, but not sure about that.

  OK, you can try to uninstall tool first start Vista in safe mode (press F8 before Windows starts upward).
  You should then be able to enter in Vista without problem.

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• Windows XP does not start after the installation of an SSD.

  Windows XP SP3 and Intel Smart Response Technology

  Recently, I built a new computer and installed Windows XP Pro and Windows 7 Pro in a dual-boot arrangement.  Everything worked very well.  I then installed an SSD in the hopes of using the Intel Smart Response Technology (SRT) to speed things up.

  I shut down the computer, installed the SSD, brought up in Win7 and follow the easy guests in SRT to activate the player.  Restarted several times and things SSD speed up significantly.  Wonderful.
  I so restart and select Windows XP so I can SRT it.  After you select Windows XP in the boot menu, a few seconds and I get a quick flash of a BSOD and the computer restarts spontaneously.  I can't enter in WinXP, not even without failure or last known good config Mode.
  I again in Win7 and disable the SRT, reboot and I can enter Windows XP very well.  So obviously WinXP has a problem with the SRT is activated outside the XP.  That being said, I can't activate SRT in WinXP first either.  "Accelerate" option does not appear in the menu.
  Any ideas on that?
  Thanks for your help!
  -Matt

  Hello

  In these cases, we always recommend to update the system BIOS of motherboard, update the firmware of the controller RAID and disks installed. If the problem persists, you will need to fix the compatibility problem directly with the manufacturer of the motherboard and add it to the RAID controller itself.

  I suggest you to contact Intel support site to improve assistance on the issue.

  http://www.Intel.com/p/en_US/support?IID=HDR+support

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also:

  http://download.Intel.com/support/chipsets/SB/intel_smart_response_technology_user_guide.PDF

• Windows XP does not start after the installation of 3 GB of RAM. Will start with only 2 GB or less.

  I installed the new RAM on my desktop Compaq EVO D500.  Everything was working fine until 2 GB.  When I tried to install no matter what the computer does not start.  Specifications of the computer say maximum RAM is 3 GB.  All the memory and are good because I swapped taken in all the combinations possible and memory.  Any ideas. gknapp_ny

  If their were any memory related settings that had to be changed I would have no idea how do.  I had initially 512 MB of RAM (256-2 sticks).  I added a stick of 1 GB aditional third availabel taking and all went well.  Then I had two more identical 1 GB sticks and added them one at a time.  With 2 GB without problem.  But with the third stick of 1 GB that I couldn't start - I just beeps. I swapped one of the sticks of 1 GB for an old 256 MB and still no start just beeps.  When I run 2 GB everything is fine.  The BIOS recognizes the 2 GB of RAM. gknapp_ny

  Sounds as if your BIOS will not identify no matter what says the spec, 3 GB.

  It seems as if you may need a BIOS update in order to recognize the 3 GB of RAM - especially if it is a very old Compaq Evo D500.  See the "Improvements" tab to the page linked below.

  See http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=96295&swItem=PSG_I15378-37635&prodNameId=97121&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Note that the patch on the link above is for models Evo D500 "with a ROM family 686Y2."  Read the "Release Notes" on this page to determine if your machine is one of those and if so, see "Instructions of Installation" to install the upgrade.  If your D500 is a laptop, you should Flash the ROM ONLY (i.e., update the BIOS level) when the computer is plugged - loss of power during this process can potentially cause irreparable harm to the computer.

• M127FW MFP: Computer does not start after the installation of the MFP M127FW

  My computer does not start on my hard drive after installation of my new printer MFP M127FW unless I have first of all disconnect the USB cable between the printer and then turn on the computer.  My BIOS is set to boot from my drive hard, not from a USB key, so that makes installing the drivers M127FW MFP and software do on my computer?  I guess it has something to do with the Smart Install feature.

  "On the printer, press Setup, maintenance, Smart Install and stop."

  It worked.  Thank you.

• Apache does not start after the installation of ColdFusion11

  I am doing an upgrade to CF8 to CF11, but should keep CF8 on the server until CF11 runs correctly on my production server.

  Apache 2.2.26, Tomcat 7.0.64

  Windows Server 2008_R2 (virtual)

  I have the original CF 11.0.0 file directly from Adobe. I chose a standard installation (no JEE) with Apache web server and all subcomponents, no servlets. The installation proceeds without problems.

  In httpd.conf of Apache, I see the code section that had been added by my previous installation of CF8:

  LoadModule jrun_module "C:/ColdFusion8/runtime/lib/wsconfig/1/mod_jrun22.so".
  < IfModule mod_jrun22.c >
  .. .more code...
  < / IfModule >

  I also see the line of code that the installer was added for CF11:

  Include "C:\Apache2\conf\mod_jk.conf".

  I can also find the file mod_jk.conf in the place that it references and all CF11 files and folders that it references exist.

  I put in the comment section above for CF8 and try to restart Apache, but it will not start. There are no entries in the Apache logs to explain what happened. If I remove the comments for CF8 and comment out this line for CF11, Apache starts fine.

  Since the installation, I have three questions:

  1. Apache does not start successfully with mod_jk.conf CF11
  2. I noticed that the ODBC services do not run in Windows for CF11 (they are for CF8)
  3. I can not navigate to the admin of CF11. CF8 admin works fine (probably on the same port, huh?)

  Ideas about why Apache does not start correctly? Thank you.

  I finally found a useful entry in the Windows system event log:

  The named Apache service reported the following error:
  > httpd.exe: 526 C:/Apache2/conf/httpd.conf online syntax error: syntax on line 2 of C:/Apache2/conf/mod_jk.conf error: cannot load C:/ColdFusion11/config/wsconfig/1/mod_jk.so into server: Apache the named service is not a valid Win32 application.

  Looking at my previous installation for CF8 notes, I found a similar problem.

  Solution:

  Extract mod_jk22.so Apache 64 - bit C:\ColdFusion11\runtime\lib\wsconfig.jar (zip) to C:\ColdFusion11\config\wsconfig\1 like mod_jk.so (in lieu of essentially the mod_jk.so CF11 Installer put in place)

  Now, commenting on the CF8 to my Apache httpd.conf section and allowing the line CF11 allowed Apache to start properly. The file mod_jk.conf applies an alias to the CFIDE CF11 so that my web address can reach the CF11 Admin!

  Completion of the process of configuration/installation in CF11 then allowed me to download and install the update 7. On Self restart, ODBC connectors are also running!

  Situation with my questions:

  1. Solved
  2. Solved
  3. Solved