Bluetooth driver after installing new hard drive

Similar Questions

• Help with Bluetooth after installing new HARD drive

  The hard drive failed on my laptop HP Pavilion dm4 3099se Beats Edition son. I replaced the hard drive, installed and activated Windows 7 64 bit (using the key supplied with the notebook windows). I used an oem Win7 disc, not the recovery disk.  Then I installed the drivers needed to make it work again. But I can't get the Bluetooth works, even if the wifi works. Use the Intel ProSet Wifi driver but the Intel ProSet Bluetooth driver returns an error when it is installed... and Bluetooth does not appear in Device Manager.

  I installed the ProSet software also. It is also an error "can not properly installed. I have not installed the HP software (which I hope it is not necessary).

  Is there than a bluetooth radios category in Device Manager?

  If so, then the generic microsoft drivers have been installed.

  Otherwise, the device is not enabled and is not being picked up by Windows.

  If you have not installed the software of HP connection manager, and who controlled the bluetooth when you reinstalled the hard drive, you need to install this software, turn on the BT using this software and go from there.

  On some HP business notebooks computers where the wizard wireless HP (predecessor to the HP Connection Manager software) controlling the wireless and bluetooth at the same time and no device showing in Windows when I reinstalled the operating system, which has happened to me.

  After installing the Wireless Assistant software, the two aircraft were then visible and I was able to install the drivers.

• No input signal after installing new hard drive

  SUP guys, im need help, my hard drive on my computer has stopped working, I'd get an important flasher hits and it looks like it please insert a disk and when I did a diagnosis, I had hard drive errors I went and bought a new one.

  In order to take the old one out I had to remove the cables from the hard drive, the big white thing that plugs into the motherboard, the processor fan and cable.

  I put in new hard drive, put everything back as it should and when I boot it all im getting are no signal input on my screen, I have tried on 3 different screens and got the same thing.

  Here are some pictures of the inside of my computer:

  

  

  

  If you notice the VGA thing on the 2nd picture, should no more added to it? I mean in addition to plug the cable from the monitor, I have the impression that there should be something added to the back of it, I just noticed now, the computer and the screen worked perfectly before.

  It's a HP model number is a6655f, it came with vista, but after putting in the new HD, I intend to put windows 7, I have a copy of it.

  I guess with the new hard drive and I am I was right assuming that you have already installed windows 7

  Sounds like you need drivers for the drive, and sounds like a simple problem, download drivers and install I believe that when you install windows 7, it offers you the possibility of drivers installed.

  Oh and you could try to change SATA to IDE in the BIOS and see if that helps

• After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

  After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

  Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

  See you soon,.
  Jerry

• Problems opening Captivate 7 for Mac after installing new hard drive

  Hello!

  My HDD recently crashed and I need to install a new hard drive (OS x El Capitan, version 10.11.13) on my mac. They re-installed Adobe Captivate (I use Adobe Captivate 7 for Mac), but now the software and files that I created using the software will not open. Initially, I received an error message stating that I had to install a new version of Java, but even after I did it, it will still not open. I click on the link in the finder and it bounces on the taskbar at the bottom for one second, then disappears. I tried to restart the computer, but it does not help.

  Can anyone help? I need it immediately for work!

  Thank you, Ashley

  I suspect that the reason is the operating system. Even the Captivate 8 was not compatible with El Capitan, I doubt that is the case with CP7. Only CP9 is compatible with El Capitan.

• Satellite Pro A120 - Jerky empty reading after installing new HARD drive

  Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive.

  A I had a problem of driver somewhere? I think it's the 945 chipset.

  Hey Buddy,

  To be honest, it's really hard for us, users, to say what causes this problem and I think you should test more yourself

  Anyway, you have reinstalled Windows using the Toshiba Recovery disk?
  You should also check if all Windows updates are installed and if you have yellow exclamation points in Device Manager.
  For any use of video and multimedia substance High Performance plan wrote BobRock_1.

  Sorry, but I think that it s all we can say :(

• No sound after installing new hard drive

  I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

  When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

  I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

  Any help or advice would be appreciated!

  There could be a possibility that you may still need to download additional software.

   

  Perhaps, your motherboard has audio drivers available at their homesite or perhaps your sound card as well.

   

  However, if you have a brand system / pc, and then click on his homesite and look for the model number for the available downloads and updates.

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

   

   

  "stefff05" wrote in message news: 5eb879d3-2646-4a25-8e81-286abb719b2e...

  I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

  When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

  I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

  Any help or advice would be appreciated!

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Catalogue lack of LR 5.7.1 after installing new hard drive

  A few days ago I was forced to install a new hard drive on my computer because of problems. I have re-downloaded all of my programs which included Lightroom. I had a disc for Lightroom 3 and then had updated to LR 5.7.1 online. I used a link to Adobe for re - download 5.7.1.  I have an Acer running Windows 7 Home Premium 64-bit.

  Now I have 2 major problems.  There are a total of 139 images in my catalog that I guess are the catalog in LR3. They appear when I click the icon in the grid. I got about 4000 processed images so why don't others appear under all the photographs?

  The way I work is to download my camera pictures in folders on my hard drive which is now renamed F drive.  Then I pass to the ones I deal with in Lightroom. Which causes probably my second problem. When I click on set to the point that one of these images to 139, the file is not found.

  How do I find the catalog for the rest of the 4000 images and how to 'find' the images first 139?

  Thank you.

  These photos are considered to be 'missing' by Lightroom... I can say because it is an icon of exclamation point on each of the photos in the Filmstrip at the bottom. You must reconnect the photos in Lightroom by pointing to the actual location on the hard disk of this photo, or alternatively, you can log records both.

  This document explains and illustrates how to do this.

  Adobe Lightroom - find moved or missing folders and files

• recovery after installing new hard drive

  The recovery disc will reset windows on a new hard drive with the key at the back of the pc

  Yes.

• Restore itunes after installing new hard drive

  Very well. I have a HP DV2726ca the HARD drive was not. I have several external hard drives. I backed up my music folder and then just copied the contents of the folder this music in the new music folder.

  When I open iTunes I see not those exclamation points or I see a bunch of clouds. shouldn't the fact that I kept physical copies say that I wouldn't have to download anything?

  I have a "iTunes folder" and a folder named "music m4a files.

  I put all my songs inside this folder "automatically add to iTunes".

  I'm so confused. In the past, I had more easily. right now I don't have one of my playlists. I clicked on see the duplicates and there were many, some are same as triples.

  I allowed my computer again. I don't understand why I not see an exclamation mark on the left side of the song or I get a rating of icloud. not sure if there is something that needs to be downloaded to play my protected music old ones I bought 128 and require authorization for the file set.

  I had installed 10 windows but I have problems to install again on windows 7. my computer gives me several s bluescreen per day. I told someone the errors, and then he said sounds like a HARD drive problem. whenever I did the test drive HP that it would fail within a second. so I bought another 500GB which is what I had in this laptop before.

  This laptop comes with Windows Vista. I upgraded to 7 years and then updated on 29 July. It does not appear that I can install windows 10 so I just want things to normal with windows 7.

• Just installed new hard drive 1 TB

  Just installed new hard drive 1 to and vista only reads only 127 GB. How can I get vista to recognize the full 1 TB

  http://www.vista4beginners.com/how-to-manage-your-disks-using-only-Windows-Vista-disk-management-tool

  Take a look in disk management.

  See you soon. Mick Murphy - Microsoft partner

• DeskJet f4180: always E error message and empty cartridge light flashing after installing new cartridge

  I always get the error message E and empty flashing cartridge light after installing new black cartridge.

  Welcome to the @vinylzappaforum!

  I read on the 'E' and the empty cartridge light blinks after I installed a new black ink cartridge. If you have tried the guides that I suggested in our other thread here, so the next step would be to call phone support at HP to discuss your printer options coming with them. I let the info below.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• After installing new cartridges, printer icon says printer is off line. Tried to go in the passage of the off-line online, without any change.

  The printer itself doesn't seem to be the problem. Have disconnected the cables, and the message is offline, offline. Reconnect and he said just in offline mode. This makes me think that it is a software that I'm not waking up switching.

  I did the online diagnostics and he thinks that the printer is turned off. But it's not. Were do form here?

  "After installing new ink jet cartridges.

  The problem began after you opened the printer.

  I suggest you contact the manufacturer of the printer.

  See you soon.

  Mick Murphy - Microsoft partner

• Printer does not print after installing new ink cartridges

  I have a Lexmark X 2500 printer. After installing new print cartridges, the printer gives me the error message to order more ink. The printer does not recognize the new ink cartridges that have been installed.  There is a warning on the ink cartridges to do not touch the contacts on the bottom of the cartridges. If this happens, how can I make them work?

  Richard

  You should contact Lexmark as they know their best products and we can onlu support of Microsoft products on this site.