Bluetooth is not ready after waking from sleep on Windows 7

Similar Questions

• T400 not re after waking from sleep - w7

  I have a t400 with integrated f5307g wan device, which works very well, but after I wake the laptop from sleep, the wan card disappears in the menu fn + f5 and can not be turned on. I have to restart to reappear.

  IM using windows 7 with the latest drivers (according to the lenovo system update). does anyone else know this?

  has not tested linux? If so, reset BIOS default values and should be solved.

• Tecra R840 not stopped after waking from sleep (USB, BT does not work)

  Hello

  I have a problem with my R840 running win7pro + SSD.

  After he wakes up from his sleep:

  -No USB activity (but there is power in ports because I can see the leds on the external HARD drive or mouse)
  -my Bluetooth mouse no longer works
  -my internet connection will work after 1 or 2 minutes of waiting
  - and... the laptop will not be stopped, unless I press the physical button on / off for 5 seconds or so!

  In Device Manager, everything looks ok! In all power management devices/REPEATER MULTIPORT USB etc is on do not turn off the devices to save energy!

  Already own started the laptop several times and the problem remains.

  Everything is fine if the laptop can't SLEEP!
  But I put it in sleep mode and I wake up it I have all these problems!

  Any suggestions?

  Best regards
  Paulo

  I think it of very difficult to find a solution to this problem because the software (OS) and hardware (SSD) has been changed.

  So the question could appear due to new software and change of material missing or bad drivers.
  To me, it seems that the issue requires further investigation.

  Did you notice the same problems using the preinstalled Toshiba system and the original HARD drive?
  I think that this should be checked first.

  By the way: this is the BIOS updated?

• Acer Aspire 5830TG will not charge after waking from sleep

  Hello world

  This problem started today, it never happened to me before. Change recent before this started was that I plugged my Sony USB recorder in the market stop charging port to recharge and left overnight, the help is much appreciated, thank you!

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you done any hardware or software changes to your computer?
  2. What is the model of your laptop?

  Please refer to the suggestions for the $CaR face replied on February 9, 2010 and check if it helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/brand-new-Windows-7-system-battery-plugged-in-not/d338d4c6-865a-49a3-8333-8c30e989a4f8

  We can also refer using these items and check the issue.

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems
   
  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  You can also try to run this Microsoft fixit to check if there is any problem in the power settings.
  Reference:
  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite T110 - Defective Bluetooth after waking from sleep

  SATELLITE T110 Bluetooth will fail after awakening from sleep.
  The icon will be flick between white and green as he seeks my device (phone).

  I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?

  Operate as planned, then I have to charge fully.
  Bluetooth connects then as planned.

  It only became a problem because I installed the latest BIOS v 2.40
  I use the 64-bit Version.

  When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.

  This is due to the new update of the bios.

  Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
  You mean that with the old version of the BIOS, everything was OK?

  Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  suturenet wrote:

  It's a stupid system, it won't let me post more of the report.

  Yes, the forum software is stupid, but you are insulting the wrong people.

  BOILERPLATE TEXT from the FAQ:

  https://forums.Adobe.com/thread/375816?TSTART=0

  Do not be abusive or aggressive in your tone

  A post of sounding aggressive, demanding, accusatory or abusive will often evoke a response aggressive or abusive and unnecessary.

  Remember, you do not discuss Adobe here in the user forums.  You ask the help of users of volunteers like you who give their time for free. Nobody has any obligation to answer your questions.

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?

• "Bluetooth is not ready", after a new installation on Qosmio X 770

  Hello

  I have a Qosmio x 770 and I was pretty stuped to uninstall the bluetooth drivers and then re install.
  When I re installed them I installed Atheros filter first then the bluetooth stack and now I get the error whenever I try to add a new connection that says "bluetooth is not ready".

  I beleve I have an Atheros driver and/or the card installed, but I don't know how to check.

  I use the bluetooth to connect PS3 controllers if that helps.

  If you need more information please ask and let me know how to get the information.

  Thanks in advance.

  Hello

  Do you have what Windows system installed on your laptop Qosmio X 770?
  I m request because the correct installation of the BT depends on the system you use.

  I also think that the ("bluetooth is not ready') message because Bluetooth has not been properly activated.
  Are you sure BT is has been activated?

  Your comments are greatly appreciated.

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• black screen after waking from sleep

  have a 2009 Intel-based iMac that wake properly from sleep if more than 30 minutes. It is a screen 24 '', 5 GB RAM and processor Core 2 Duo 3.06 GHz, 256 GB SSD drive and was just upgraded to El Capitan at the start of this behavior. The extra RAM and SSD have been installed a few days before the upgrade of El Caitan, so am not sure that the upgrade of the OS was the culprit, but it seemed to work normally after the SSD and RAM have been added. After that the computer sleep long enough to power down disks, etc., the screen remains dark when the computer wakes. If you put it to sleep then it wake up immediately he returns normally without problems. You can hear the startup sound and can even connect and enter the password and hear the mail and other programs that are running, giving their notification sounds, etc.. However, the screen remains dark. If you restart it 10 or 15 times the screen will start normally and the computer works perfectly. diagnosis seems to indicate normal operation. I tried to reset the SMC and the NVRAM and start in safe mode, but these things have no effect. Is it possible to get help with this?

  I run Apple Hardware Test and found no hardware problem under standard test or extended. I ran the first aid on the SSD, but no permissions problem have been found. It is not as if I have a hardware problem, but a problem of software not defined.

• Wi - Fi disabled after waking from sleep - G9-591-70VM

  A few days after the awakening of the laptop from sleep, the WiFi has been disabled.

  Only the ethernet with a red 'X' icon was present.

  Troubleshooting and looking in the network settings of the Control Panel, it was as if a Wi - Fi connection did not even exist on the laptop.

  Restarting the computer does not resolve it. Stop and start the dos system did.

  It happened again just now. All this experience? Thank you

  Hi Kenshin

  What network killer driver do you use so that what happened?

  If you use a driver updated the Acer (pre-installed with the machine) I recommend that you download the new driver directly from the site of the network Killer (here)

  1. uninstall the driver of killer

  2. restart the system

  3. install the new downloaded driver

  4 restart once again

  After that I did anything ever happen related to the network for me yet once (for example, BSOD, lack of WIFI, etc.).

• HP Pavilion 2000 - 2120TU Bluetooth does not work after upgrade from Win7x32 to Win8.1x64

  Hello

  I used my laptop HP Pavilion 2000-2120TU since Apr. 13.
  Initially it was without any OS, so installed Win7x32 Pro.

  After that, I downloaded and installed the drivers from the HP site and all features were OK, including Bluetooth.

  Now I have upgraded to Win8.1x64, once again, downloaded all the drivers from the HP website and install them, but the Bluetooth is not working properly.

  I downloaded

  Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows 8

  Try this one and if it does not, unfortunately, I won't be able to any more help this issue because I have no idea what the problem is.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_127984_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• LR 6 is unresponsive after waking from sleep

  I upgraded to LR 6 in January, and all was well until a few weeks ago, when everytime I wake up the computer from sleep mode, if LR is running, it stops responding. No amount of waiting will allow to become sensitive.

  Of course, I could just leave before going to sleep, but because it takes a while to start, I'd rather not.

  I tried to delete all the related Adobe prefs.

  Technical specification:

  MacBook Pro 2011, 16 GB RAM, new logic board after the failure of the GPU (twice)

  LR 6.3

  Mac OS 10.9.5

  OK, you have almost eliminated a faulty hardware.

  Problem blocking 6 Lightroom on MacOS 10.9.5 wakeup | Community customer Photoshop family

  I noticed you talk about reset the LR preferences file, which will cause support GPU to be re-enabled by default.

  Please check the LR Edit menu > Preferences and make sure you have "USE Graphics Processor" unchecked as below. Close all applications, shut down your system, and then restart your system. Even if it is a test not controlled start/stop of the cycle for the chance and see what happens.