Bluetooth is not recognized on Satellite Pro A100

Similar Questions

• Realtek RTL8187B is not recognized Vista - Satellite Pro L300

  Hello

  I have a Toshiba Satellite Pro L300. It came with vista but I upgraded to 7.
  Now I have installed Vista with all the drivers but there is a problem, the wireless card does not work (RTL8187B) I get to a point that the Device Manager recognizes it, but says he has a problem.
  I downloaded several versions of the driver but nothing. If you could send me an earlier version of the driver or a vista recovery disk that I would be really grateful.

  Please help me that my only hope is to pray...

  I put t don't know what drivers you downloaded but please use portal Toshiba WLAN driver - http://aps2.toshiba-tro.de/wlan/

  He has to work.

  By the way: what type of problem is listed in the WLAN card properties?

• 2 GB card SD not recognized in Satellite Pro 6100

  Hello

  I got a new 2 GB SD card passenger high speed. When I insert into the slot of my Satellite Pro 6100 SD card, I see in the list of the Explorer, the new drive, but when I click it, it says: "Please insert card".

  The card works fine in my Pocket PC.

  What can I do? What is the size limit of card for the SD-Card-Reader inbuild?

  Any help is appreciated!
  Thank you!

  At the point where Satellite Pro has been offered, there was no 2 GB SD card and card reader has been tested with available maps only. If you're lucky, 1 GB card can be readable.

  I think you this card works fine in the other device. There is absolutely no problem with the card itself but old material or even driver for the card reader.

  Maybe in the next few days, someone will point out what card can be used with SP 6100.

• CD/DVD drive is not recognized on Satellite Pro L10

  Hello. can someone help me with the following: -.

  My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

  the (r) drive is shown as TSST Corp TS-L462A - can I get the update
  Download Driver from the site? (is it free?)

  Thanks for any help

  Paul

  Hi Paul,.

  You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

  However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

  Kind regards

• Drivers Ati Vista will not install on Satellite Pro A100 PSAACE

  I saw a number of other users in the forum with the same question. I looked a little further on my machine, and it seems the driver saves oneself is not worl or there is a hardware fault with the graphics card.

  Here, it's put him the catalyst installation error report...

  Catalyst® Install Manager
  Installation report
  Thu, July 12, 2007 13:28:08

  Hardware information
  Name of the ATI Mobility Radeon X 1400 graphics card
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 7145
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0xff10
  Subsystem vendor ID 0 x 1179
  Other materials

  Existing packagesATI Catalyst Install Manager
  Catalyst Control Center
  Microsoft Visual C++ 2005 Redistributable

  Packages for installation
  ATI Catalyst Install ManagerFinal status:
  Version of the article: 3.0.504.0
  Size: 20 MB
  DriverFinal ATI display status: failed
  Version of the article: 8.31.100.32
  Size: 90 MB
  Catalyst CenterFinal status:
  Version of the article: 2.0.2519.38216
  Size: 150 MB
  Microsoft Visual C++ 2005 RedistributableFinal status:
  Version of article: 7.3.0.0
  Size: 10 MB

  Other devices detected

  Error messages
  Driver installation: installation failed
  Installation of the application: failure

  After the execution of the executable, I tried to install the driver maually locate the files in the driver package, while windows recognizes the inf file, it gave an error saying that it could not read the device...

  Hello

  What graphics driver you used?
  One from the ATI Web site or the graphics driver for the Toshiba page?

  You must use the graphics driver on the page because Toshiba that these drivers are designed and specially modified for Toshiba laptops!

  I tried to use the graphics drivers for example, nVidia page, and I was not able to install it automatically.
  I find on this forum that the graphics drivers from Toshiba are slightly changed to prevent overheating of the graphics card.

  Due to a high performance graphic map of the temperature increases and can damage some parts inside the laptop.
  The graphics driver prevents the increase in temperature and slows down the performance of the graphics card. If temperature decreases the performance increases.

• Satellite Pro A100: Bluetooth does not work

  bought a toshiba Satellite Pro A100... came with a built in blue tooth... al worked well... until 4moths to fight back my computer had to be repair he was expelled to the toshiba returned however restarted by bluetooth/service application are not on the taskbar.

  I am looking for the computer n found in system folders aside my blue tooth stack but how to make the blue tooth to work.

  Make sure the WiFi switch is on.
  Press + and select the bluetooth antenna.

  Check if your Bluetooth module has been correctly detected:
  -Open the DeviceManager (start-> Run-> "devmgmt.msc").
  -Open the section "system devices".
  -A "Bluetooth ACPI" device should be available.
  (The system has detected the BT module if this is the case).

  Install the battery last Bluetooth (= drivers + Bluetooth management software) v5.10.12T.
  You can download it here:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php

• Satellite Pro A100 is not recognized any amount of RAM

  Hello

  I have a Satellite Pro A100 and I just bought 1 GB of additional memory. There are two locations, each with a capacity of 1 GB.
  When I put the new memory into the slot and the old 512 MB original memory in slot B and the computer says it is 1 GB.

  I have them two-way round so that the 512 MB is has the 1 GB in B. Now the computer says that there is 512 MB.
  Is there anything I can do to work B slot? I have the latest version of the BIOS update.

  Thanks in advance.

  Hello

  > original 512K of Ram also works in A slot, but not in the housing B.
  This looks like your slot B is defective, mate :(

  I think that, in this case, you can't. You can swap the card mother but that s all.

• Carpet * a DVD-RAM UJ - 841S does not recognize movie DVD on Satellite Pro A100

  I have a portable Satellite Pro A100-PSAAPE.

  Initially the played DVD movies very well, but now it does not recognize DVD movie at all.

  The drive itself is recognized and works very well with recovery DVD and CD-ROM.

  Phone support: they had me reinstall the driver and boot from the recovery DVD. This does not solve the problem. They then said to do a system restore. Tried, but it seems that the previous restorations of system are in themselves unsuccessful and the restoration of the system that has worked has not solved the problem.

  MediaPlayer and Intervideo WinDVD seem to work well, but do not find the DVD in the drive.

  They advise now reinstall me to factory setting, but don't want to build the laptop up to scratch etc, so I'm hoping that there may always be a solution.

  Can anyone help please?

  Thank you

  Best wishes

  idob

  Hello

  You understand that you must specify if it is a hardware or software problem.
  Unfortunately, you can find this secret only using recovery DVD (CD).
  Toshiba recovery installation will define the laptop back to the factory settings. In this case you may find whether or not the CD/DVD device is defective.

  If the player will not play the DVD after the reinstallation of the operating system, then chances are that it is a CD/DVD drive error.

  Good bye

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

  Hello

  I have a Satellite Pro A100 with a carpet * a UJ - 841 s DVD Multi Drive.

  Recently, I decided that as my laptop is running slowly I wanted to format and reinstall XP Pro, I used a standard version of OEM XP Pro (not seller specfic) and he went on the formatting and the reconstruction of my laptop.

  Fortunately, I used Acronis True Image to backup my laptop before I did that my above mentioned dvd player is so more to bury properly (all the drivers and the necessary software has been installed). Before I formatted the laptop I could burn on + and - DVD (r, rw and ram) now that the laptop has been rebuilt, I can only burn to dvd-r/rw/ram.

  I restored from my laptop to the picture created by Acronis and can use the drive normally again to burn + and - DVD.

  Does anyone know why this would have stopped working in the new installation of Windows? I also tried to create a virtual machine using the same xp disc but it always gives me the problem of dvd player.

  Thank you

  Rich

  Hello rich

  Have you noticed the same problem after using Toshiba designed recovery DVDs?

• Touchpad is not what I want - Satellite Pro A100

  Hello

  I have a PSAACE-00V002EN Satellite Pro A100.

  I seem to have a problem with the touchpad - he decides for itself I want to minimize a window when I click in the page (web browsers, etc.). I could try to use the scroll bar or click a link but is not what I want it - it will minimize or expand to full screen. Sometimes it doesn't let me select anything or put my cursor in a text entry box.

  I installed the latest synaptics drivers but this does not at all affect.

  Kind regards

  Dave.

  Hello

  The same problem occurs when you use the external USB mouse?
  Did you install the 3rd party applications that could have a bad influence on the work of touchpad?
  You know, it s interesting to know if this happens on the operating system that was fresh installed on the laptop

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Re: Satellite Pro A100 PSAA3E: after XP installation does not work

  Hello

  I recently bought a psaa3e Satellite Pro A100.
  I formatted and installed Win XP. Everything works except the sound.
  In Device Manager its shows a PCI device problem.

  I think I need the pci to install before my sound card is recognized.
  I could be wrong and often am installed all drivers I could find on this site for my laptop.
  Any suggestions please, its driving me crazy.

  brgds

  spadger

  The solution is simple.
  After installing Xp, you must install all the service packs. SP2 is important.
  In addition, you will need to upgrade the XP to the last State. All fixes and patches must be installed also.
  The * KB888111 * and * KB835221 hotfix * must be installed before installing the audio driver.

  After installing the hotfix, restart the computer, and then reinstall the audio driver!

  Good luck