Bluetooth isn't turned on, latest firmware installed.

Similar Questions

• 42RL833 - latest Firmware installed and cannot access the YouTube app

  I have 42RL833 Toshiba which is updated to the latest firmware, however I still cannot access the application on my YouTube. I get an error saying that Youtube XL is no longer supported.

  What can I do to fix this?

  > I get an error saying that Youtube XL is no longer supported.

  Google has stopped the YouTube XL service and, therefore, this service isn't available anymore.
  http://www.Toshiba.EU/innovation/generic/YouTube-XL/

  You can read details here:
  https://support.Google.com/YouTube/answer/3123170?hl=en

  It also seems that YouTube XL has been replaced by YouTube Leanback Lite:
  http://www.YouTube.com/leanbacklite
  See also:
  https://support.Google.com/YouTube/answer/3153576#

  There is also a note that if you can connect your computer to your TV, you can continue to use the YouTube TV-optimized experience by visiting youtube.com/tv.

• My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... .etc

  My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... etc I tried everything. He used to work on Window Vista and a few old iTunes. I've updated to iTune and move to Uverse. It has stopped working. I thought the problem was iTunes so I've updated to the latest version of iTunes in Vista, then update to Vista and then install Windows 7 and then last iTune on Windows 7... I now have everything that the most recent and it still does not work. I have not the firmware on my router can be updated, but I think it's fairly new

  There may be a setting on your router you can disable IPv6.  Try this and also disable IPv6 on your NIC again.

• Where can I get the latest Firmware UJ - 822S for Portege S100?

  I'm looking for the latest firmware for this drive. The drive came with the Portege, and I know that they are specific OEM. There are later versions of the firmware available on other sites of manufacturers, but these will be simply screwed to the drive. I'M NOT AFTER RPC-1 firmware, just the last available if possible.

  Thanks in advance,

  PoB0782

  Hello

  Is there a special reason why you want to install new firmware, maybe some problems burning?

  I put t know where you can find the latest firmware for this phone, but if you Google a bit you will find many forums, such as http://forum.rpc1.org/.

  You will find useful information and comments about the firmware and the results. I just want to say that you should be careful about this. I put t know how old your unit and if the warranty is still valid, but please note that, after the installation of the firmware non-Toshiba, warranty for ODD will be lost. In the case of the STRANGE is defective it is not replaced.

• Connection (enable WebService) error - CM1415fnw (latest firmware)

  Hello

  I bought amazing HP LaserJet Pro CM1415fnw color multifunction, yesterday. So my quest began:

  (1) installed the latest drivers on Mac OS X 10.6

  (2) connect the printer to the desktop external network WiFi (AirPort Express with DHCP and static IP to the internet)

  (3) tried printing via AirPrint, printer is not found, then download the latest firmware and upgrade of printer.

  (4) AirPrint works very well and I tried to enable Web services for the first time

  (5) connecting... Connection... Connection:

  Connection error

  The printer is unable to connect to the services. Check the Internet connection. Press [Retry] to try again or [OK] to exit.

  I tried a few times, switch power and WiFi connection. Tried to do it via the web interface and get error "connection error. Check Internet connection. ».

  Any ideas?

  Check your network settings. In particular, check that the gateway ip router is correct. The HP software can set the wrong ip there.

• Question about 4.0.4 latest firmware

  Hello Moto, I had updated my device to the latest firmware (673.94.324.XT910. PSHAsiaRetail.en.03) via OTA. Completed the update very well. I did a factory reset after the update of data. When you set the camera after startup, there was no account Setup Wizard (I love this feature because I often have to do a hard reset on my phone). The Startup Wizard just to skip setting up accounts for some unknown reason. So the question is, has my update succeeded or he just missed a file during the update? Maybe it was a bug in the firmware related? Its just me to be skeptical, not a big deal though. Thank you.

  This isn't a bug, all right. Setting up the account has been deleted.

• LaserJet M553x: the latest firmware of rank on LaserJet M553x

  Can someone tell me please how to save on the latest firmware (2306242_531754).  We bought 27 LaserJet M553x printers and only installed the latest firmware on 2 of them.  And right after that I installed the latest firmware I am more able to control which tray to print the page seperator of.

  Before... printed tray 3 and tray source 2.  It's more work, but works on printers without firmware.

  Please let me know if you were able to get this resolved or are still looking for a solution.

  I work for HP, supporting the HP Experts, who volunteer their time and expertise to help others.

  Thank you.

• Sansa C250 v2 (01.01.05P). microSDHC? update to the latest firmware? Linux questions.

  People of greetings,

  just got my refurbished Sansa C250 2 GB. Back to v2. Parameters a 01.01.05P for the version number.

  I read somewhere on these forums that even if v2's back, it does not mean necessarily that the player is actually v2. Is this true? How can I tell what version it is?

  So should I upgrade to the latest firmware and which?

  I plan to buy either a 4 or 8 GB card microSDHC. Advice please.

  Anyone who has used linux to update firmware and for all other operations or would I have to use windows?

  Thank you

  Prasad

  Well, since nobody answered my questions, I will answer them myself.

  As has been said on this forum and others (http://www.anythingbutipod.com/forum/showthread.php?t=24680), this is the version of the firmware that you use to know the version of your player. Mine is v1. I think another, or should I say a sure way would try to penetrate into the first partition (or the partition to install the firmware) - If your drive is v1, it would be to put your player mode waiting (moved to the rec and orange shows on the left button) press and hold the rec button and plug it into a computer should appear the partition of 16 MB. V2 has a different key sequence.

  Since it is highly recommended to upgrade to the latest firmware, I upgraded to 01.01.00P which, by version number appears a downgrade, but it is what is here to... He did bring back the USB menu however.

  Since then, I could install Rockbox (http://forums.sandisk.com/sansa/board/message?board.id=c200&thread.id=3396), I'll go ahead and buy a 8 GB microSDHC card. Will post here when I get it to let you know if it worked or not. I think that should be. This post helped me decide to go ahead and buy it: http://www.anythingbutipod.com/forum/showthread.php?t=35302.

  I used two Fedora-7 and live CD Fedora-9 (on USB) - no problem.

  just something I did - I took a return of my entire 2 GB (after formatting the partition of 2 GB to get rid pictures and music that came on the player). used dd if = / dev/sdc. gzip - c > sansaC250. Also saved the first (16 MB) partition dd if = / dev/sdc1. gzip - c > sansaC250part1. I just thought I might be able to use it if I bricked my drive when rockboxing it. I don't know if restore partitions (or the entire disk) is unbrick it at all. Happy had to use it.

  Take advantage of...

• Don't I have the latest Firmware for WRT110?

  I just bought and installed the WRT110 and I was wondering if I have the latest firmware. I show the version 1.0.04)is build 10 in routers administration page.

  Also, I would like to know if I have security measures in place for my network. I am 'new' for wireless routers, but I used a wired Linksys router with two computers on the network. Now my wife has added his MacBook to the mix, so I thought I would try a wireless router. The other two systems will remain wired for now.

  So far I have:

  Compatible WPA - 2

  SPI enabled

  NAT enabled

  MAC enabled filtering and only authorized wireless computers MAC address

  Changed default SSID

  Default password changed

  What else should I consider for this set - up?

  Thank you

  Paul

  You should not loacte the router near the LCD monitor also or other computer equipment or speakers...

  To disable the SSID broadcast-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  Click the Wireless tab, select Disable SSID broadcast...

  Disabling the SSID broadcast prevents your network to appear in the list of available wireless networks, but it is still present...

  Note that disabling SSID broadcast is one of the many techniques of tightening of security on a Wi - Fi network. This technique is not 100% effective, because hackers can still detect the SSID sniffing different messages in the Wi - Fi Protocol. Yet, using techniques as the disable broadcast SSID makes it more likely that any intruder it will move your home network who seek easier targets elsewhere.

• Sony Xperia M4 Aqua double E2363 can't update to the latest firmware

  I have a double M4 Aqua E2363 that was a price of Xperia Lounge competition.

  My problem is, the phone is in the first 26.1.B.1.85 firmware and can not detect the new firmware 26.1.B.2.147

  I check in the PC Guide and he said I have the new firmware.

  What can I do to update my phone?

  PS. can I Flash stock Sony firmware with 26.1.B.2.147?

  Its simple firmware installed on your phone isn't the only custom and especially a firmware built for purposes of demonstration, so they used to get updates. Yes you can Flash stock E2363 region of the firmware via flashtool.

• Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all scrambled together all left links

  Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all the links scrambled together on the left side of the page. Same thing with face book page. All use them to work properly. 64 Waterfox win 7

  Do not use waterfox, it is not supported and is a non-official version of Firefox that often has known bugs. Downlaod Firefox from www.getfirefox.com, uninstall waterfox, then try again.

• Where to download the latest firmware for Toshiba TL938G

  Can someone give me a link where to download the latest firmware for TL938G?
  I want to update with USB

  Thank you

  Hello

  Have a look here:
  http://www.Toshiba-OM.NET/firmware.php

  + The message was edited: link has been removed.

• Cannot find the latest firmware for the Toshiba 40TL838G

  Hello

  I am trying to download the latest firmware for the 40TL838G model, but I'm not.

  Where can I find it?

  Thank you.

  The same has been asked in this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914

  We can receive the update only via a network update
  In which case you will not receive updates via the network, your firmware is up to date.

• Download the latest firmware for Toshiba 40RL838G

  Can someone give me a link where to download the latest firmware for 40RL838G?
  I want to update with the USB (no internet connection available)

  Latest firmware (in the firmware information) is 6.4.0V.1, but TV has 6.1.oK.1 (21.Oct 2011)
  With this firmware, I have problems with the channellist.

  Thank you

  I guess that you won't find it for download.

  The info says:
  Updates to energy efficiency TL838/868 RL838/858
  Energy efficiency upgrades were made to the series RL838/858 both TL 838/868. In order to update your TV with the latest firmware and take advantage of these changes, please follow the methods below:

  * Please note that the TV must have an active internet connection to update the firmware.

  Internet access can be obtained by connecting to the local network or WiFi (using the required WiFi dongle)

  Connection can be confirmed by doing a trial of network connection. This can be done by selecting preferences-> network-> Network Connection Test configuration

  * Method 1: *.
  _Automatic network warning
  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning
  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

  If you need the device to the network

• Need the latest Firmware for Camileo P30

  Where can I get the latest firmware?
  Thank you very much

  If the firmware is available you can find it on Toshiba support page http://eu.computers.toshiba-europe.com
  But I have fear of firmware is still not available.