Bluetooth issues with ios 9.3.4

Since upgrading my iPhones 5s and 6s to ios 9.3.4 Bluetooth will not connect on my iPhone (without audio). It happened with some other ios updates. The Apple technicians check these discussions? (Of course, the said Bluetooth device has established a link, but there is no sound!)

Note that my iPad is still running ios 9.3.2 and Bluetooth works very well (big audio). Also note that I am able to listen to podcasts, novels, etc., through hearing aids Siemens wireless. Works great!

Hello

Update iOS 9.3.5 iPhones.

Tap Settings > general > software update

If this does not help, on an iPhone, tap Settings > Bluetooth > on and then turn off Bluetooth then under tension.

If it makes a difference, do the same for the iPhone of the sentence.

Tags: iPhone

Similar Questions

  • iOS 10 Bluetooth issues with Visual Voicemail

    I just updated my iPhone 6 more for iOS 10 and use a Plantronics Voyager Edge bluetooth headset. After update I removed the unit and reset the network settings and then paired the headset to my phone.

    I had a few problems with the audio. First of all, no incoming call notification and audio number are routed to the headset. Before the update registered contacts would be announced. If the call was not associated with a registered contact, he would announce the incoming number.

    Second, when access to Visual Voicemail with the headphones plugged voicemail audio output is not routed the headset. If I use it to play music or other audio he paused but always delivers voicemail audio to the phone.

    Has anyone seen elsewhere this behavior or had similar problems?

    On the voicemail, I tried several different bluetooth headphones and I can not listen at all if the headphone is plugged. First, it tries to connect to the bluetooth, but then it just stops. If my headset supports the end of the notice of appeal, I will do a notification on the helmet, which indicates the end of the message before it happens even 5 seconds in the message.

    If I disconnect all the of bluetooth headsets, then I can listen to either on the phone or on the speaker.

  • Bluetooth issues with car matching Subaru

    I upgraded my iPhone to iOS 10 6 and my bluetooth stopped working in my Subaru Outback 2015. It worked perfectly before the upgrade. Unmatched two car and phone nothing worked - can someone help me with this

    Try the instructions here > get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

  • Cards and rental issues with iOS 9.3.1

    So, it seems that some iPhones have been affected by the latest 9.3.1 update when using maps and location services.

    Since my update to 9.3.1 new iOS, both of my APPS of the map no longer work.

    I went to the Verizon store and they said they had 6 other customers with the same question this week come in the store, but could not help or has a solution. They said it was a problem with the new ios

    Okay, I'll be happy to take a look with you. What seems to happen?

    Well when I enter an address in MAPS or GOOGLE MAPS at random falls a PIN for my site no where close to where I really am.

    He will say that the destination is, and then all the c apps is they state "loading".

    then the cards just freeze and there is no gps in real time or the point "you are here" never moves...

    OK, so the location is never load and if so it is not updated to become precise?

    fix

    and even when I tap on the arrow to refocus or start again the directions... just it freezes or trying to load...

    and then will never give real guidance... because my original location on maps... is leagues where I'm really... or let me down in the middle of a wooded area, etc.

    Ok thank you. I know how it is important for maps working properly! I'd be keen to have fixed too.

    I completely deleted the Google maps app and reinstalled it... with no fix... same issues

    It is a problem that we've seen happen from time to time after this update. In some cases a full restore to the factory settings and then restore a backup to the phone set. Otherwise it will be a bug problem which is released with the 9.3.2 update which should hopefully will come out soon.

    also, I backed up my phone and deleted everything with a factory reset...

    always had problems even after

    even after reset and reload the iOS again... nothing works

    OK, so it seems that yours will be the one who will have to wait for the 9.3.2 update with bug fixes for the location and accuracy.

    Therefore, it does not mater if I buy another maps application? still underway to have the same problems with the gps and location?

    You can certainly try each of them have different compatibility requirements, but we found that most of these cases concern the location services on the phone itself.

    and I can't get rid of the 9.3.1 iOS version? and go back to the old version?

    If you had a backup of an earlier version, you can restore and then use the backup of the old. Just, you lose everything that you have current data.

    Hmmm... is in fact phone... like three of my friends who have an iPhone 5, iPhone 5 c and the iPhone 6 have no problem...? ! ? ! Just me...

    It is not with all phones. It has been an intermittent case so far. There is no rhyme or reason as to why some phones have had problems with the location after the update.

    Hmmm

    If no solution... and simply live with it until a new iOS comes out, and who knows how long it will be...

    I know that the update is being developed because it contains bug fixes for a few different issues. However, I'm sorry I don't have an exact date.

    Just a question - when you deleted everything for a factory restore - did restore like NEW or from a backup?

  • Issues with iOS 9.3.3?

    Anyone had any issues since the upgrade to iOS 9.3.3?

    Nothing at all... do you need help?

  • Is there a bluetooth issues with ICS / Jellybean on IdeaPad A2109

    Hi all: I was wondering is there any kind of problems with the bluetooth on an A2109 with her wanting to disconnect at will and being almost impossible to get it to reconnect.
    I know it's a problem inheirent with ICS and on my Iconia A500 it was driving, me crazy to the point that I returned using a mini usb keyboard plugged into it. I also bought off game Google a program called Bluetooth Keep Alive and there is a little help but has not solved the problem completely.

    This problem occurs even with my bluetooth mouse, but once I have hung do until he's going to stay until I stop my tablet.

    The reason why I asked this before, I bought my A2109 is if I have this kind of problem so that I can live with it being a bit of a pain with my mouse but if even upgrade to Jellybean doesn't solve the problem, if the A2109 has this problem.

    Having to load it via the mini-usb port, which makes it nearly impossible to leave my wired keyboard connected while I use it.

    I might have to look like an excited Toshiba.

    Unless someone here can give me a certain fixed light or an alternitive that it is able to load when you use my wired keyboard. Thanks for your comments.

    WasteLandSavage wrote:
    Thanks for your quick response.

    Now for my other question and if you know maybe you can point me in the right direction.

    IF I had to have this problem would be possible to connect the charger to a using Type A male usb hub usb cable, the cable into the hub and plug the hub on the Tablet using a Micro usb adapter, which allows me to load when you are using a wired keyboard?

    I googled my brains and can't find one answer other then it is possible theoretically. Thank you

    I'm sure that you cannot connect a charger to a hub.  However, a powered hub should provide some charges to the A2109, though not much.

  • with IOS 10.0.2 - 5s iphone Bluetooth problems

    Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

    It has always worked perfectly before the 10th of IOS.

    And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

    I did:

    Forget this device for the PLT M50 and paired again (several times)

    I did a Reset Network Settings

    I don't know what else to do - but it's a 10.0.2 IOS issue.

    Hello AppleUser2k,

    Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

    The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

    Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

    If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

    Thanks again and have a great rest of your day.

  • Air iPad with 9.3.2 Bluetooth issues

    I upgraded my iPad Air to 9.3.2 and now it does not connect with all Bluetooth devices. It will not find most of them, but even if there is a discovery, it will not pair with anything.

    Just before that, I reset my iPad completely and refreshed with the new iOS.  My iPad showed 700 MB of memory left in the memory usage, but when I connected to iTunes on my laptop it showed nearly 13 GB of available. I tried to remove several things, deleting and reinstalling apps, but nothing seemed to free up memory, and most of the memory is being taken over by one big yellow 'other '.  So I reset the iPad and started from scratch. When it resets itself, it is automatically downloaded 9.3.2. I didn't restore from backup, but I rebooted all the apps that I've had, and the memory issue has been resolved (I now have a little more 13 GB of available), but now I can't connect to my Bluetooth keyboard, car or speaker.

    I went through the process of resetting the network settings and reset all settings. I have turned on and off Bluetooth several times. I have turned on and off other devices several times. I turned them all on and off in a different sequence. My iPad that air will not connect to any Bluetooth device.

    I read that there is a significant problem for many users. Please let me know when a fix will be made available, or to explain how I can downgrade to 9.3.1.

    Hey there Bmwilking,

    I understand that you are having problems with your iPad Air and you cannot connect to any Bluetooth device currently. I have an article for you with a suggestion to deal with this situation directly:

    If you still cannot match or connect your Bluetooth accessory

    Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device.

    Contact the Apple Support if you have any of these problems:

    • You can't turn on Bluetooth or the setting is gray.
    • You cannot connect any Bluetooth accessories with your device.
    • The accessory manufacturer has confirmed that your accessory works properly.

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch - Apple Support

    https://support.Apple.com/en-us/HT201205

    Be vigilant and thank you for visiting the communities of Apple Support.

  • Problem of Bluetooth connectivity with Oticon hearing aids and 10 of the IOS.

    I use the Oticon Streamer Pro 1.3 to connect my hearing aids to my iPhone 6 more via bluetooth.  With the IOS 10 update the streamer keep disconnection, reconnection and disconnect.  I tried forgetting the device and once again pairing with the iPhone.

    Hi, Dick

    I have similar problems with my hearing aids Starkey.  iOS 10 broke the bluetooth.  I've been working with Apple, he's broken, no solution until the next update.  Incidentally 10.0.2 is not the solution

  • Bluetooth connectivity on iOS 10 issues.

    Given that I have updated to iOS 10, my 6 s iPhone more does not properly connect to my car - 2007 BMW 530xi. I had no problem before updating to iOS 10.

    MY phone shows that it is connected and so does my car. However, my phone calls are abandoned at the beginning of the conversation. I answer the phone through my car, but it won't work for some reason any. Then I try to change settings of the speakers in my car on my phone back to my car nothing helps.

    Please do not ask me to try simple troubleshooting stupid as I did. I used iPhone and products Apple specifically for the iPhone 4. I know what I'm doing. It is only fair that iOS 10 broke some internal features regarding the Bluetooth connectivity.

    If anyone else has similar problems with their 10 iOS Bluetooth not connecting, please state so that Apple can precipitate a quick update. I can not even use my Bluetooth in my car which is very frustrating as I drive a lot for work and won't put on a helmet or something else on my ears while driving as it is useless for me.

    I have EXACTLY the same problem. For me, it's a 2016 X 3, but the behavior is the same. Devices think they are connected, but are not in force.

    I have reset my network connections, I disconnected and reconnected manually and some other stages of trials and errors. None have assimilated to the sustainable, stable connection I had with iOS 9.

  • Can not listen using bluetooth headphones with music Apple after updating iOS 10

    I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

    Any suggestions or help would be greatly appreciated.

    Hi the edema,

    It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

    As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

    Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

    1. Make sure that your device iOS and Bluetooth Accessory are close together.
    2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
    3. Restart your Bluetooth accessory.
    4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
    5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
    6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

    Thanks for stopping by Apple Support communities. See you soon.

  • iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

    Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

    To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

    Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

    All yo can do is to continue using the beta until the version is rejected in the pubis.

    Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

    https://www.Apple.com/feedback/iPodTouch.html

  • Issue of iOS 9.3 Bluetooth disconnection

    I noticed that * might * have a bug with iOS 9.3.  All my devices using bluetooth now seem to disconnect randomly when using.  All my cars, headphones, bluetooth etc. soundbars have met randomly ~ 10 second interruption in the connection during normal use.  Devices will reconnect sometimes, other times I have to turn off the accessory and start up.  What happens with a 6s and is verified as event at least 6 different various vintage accessories using bluetooth.  Everyone has noticed this after the upgrade to 9.3?  Before application of 9.3 I had never seen this error before.  I also had this happen with at least a helmet on my iPad Pro using 9.3 as well.  I did the reboot standard/forget and repair etc and nothing seems to fix this.

    The confirmation that it is in fact a problem or advice would be appreciated!

    I have the same problem on iPhone 6s, iOS9.3

    Had no abandonment before that.

  • pouvez iphone with ios 9 use bluetooth 4.1 5

    pouvez iphone with ios 9 use bluetooth 4.1 5

    Hello ajwaka,

    After reviewing your post, it looks like you want to know if the 5 s iPhone supports Bluetooth 4.1. I recommend you to read this article.

    iPhone 5 s - technical specifications

    Cell phones and wireless

    • Wireless Bluetooth 4.0 technology

    Thank you for using communities of Apple Support.
    Good day.

  • AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

    AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

    Try these steps, check to see if things work after each step if necessary, before you try the next.

    1. Check AirPlay is on the Apple TV (turn market if it already is)
    2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
    3. Restart the Apple TV (settings > general > restart).
    4. Restart the Apple TV by removing ALL cables for 30 seconds.
    5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
    6. Restart your computer or mobile device.

    If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

    If your problem is AirPlaying starting a computer, try turning off bluetooth

    If you're still having problems, the following article can help you.

    Troubleshooting AirPlay

    Troubleshooting connections and Wi - Fi networks

    Recommended Wi - Fi settings

    WiFi Diagnostic Software (for Mac users)

    You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

Maybe you are looking for

  • Photosmart B110A: Ink cartridges Setup

    Hello world! I have reset my Photosmart B110A (by entering the hidden menu) but now when you want to install it and set it up, the process stops because I did not SETUP ink cartridges, but others. How can I fix that?

  • Droid razr maxx: how to uninstall flash?

    How can I uninstall adobe flash of my razr maxx? I don't want that would it be because he eats memory, use of data increases,slows down web pages, security holes. Many web sites work better without flash. Thanks in advance!

  • Ask questions about the HP Pavilion 14-V041TX Bluetooth

    Hello, sry for asking questions about simple things. How to activate bluetooth for laptop HP Pavlion 14-V041TX? Or how to bluetooth to detect other bluetooth devices? coz already try to use my smartphone, but cannot detect any bluetooth device or lap

  • My laptop was stolen. can I install office 2007 in my new laptop?

    Hi all I had my computer toshiba laptop, stolen last week. In it, I had installed Office 2007 jenuine software. What can I do to block this license and install it on my new laptop? Thank you for your help. Kind regards Christina

  • utilities

    Now, my laptop takes 4 minutes to complete startup. Several utilities advertise that they can speed up the process, but I tried several trial but have found nothing which seems to have improved the position. I disabled several programs that start at