Bluetooth network is not available

Similar Questions

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• I use a computer laptop xps 15 in which I want to use my computer laptop wi - fi as a bt hotspot it gives me error that Microsoft hosted network is not available

  Dell xps 15 laptop with windows 7 Home premium 64-bit
  processor Intel core i5 2.30 GHz

  Hello tejashande,

  Thank you for the question!

  It is disheartening to know that have problems you with the computer laptop wi - fi. As I understand it, you get an error that Microsoft hosted network is not available when you use the computer laptop wi - fi as a hotspot.

  I need to ask you some questions to help you best.

  1. What is the exact error message related to networks hosted?

  2. is it works much earlier?

  Download and install the Wireless driver from the link below and check.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/3854.XPS-15-l521x-Windows-7-driver-cab.aspx

  Answer to us if you are having problems with a Wi - fi connection or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Microsoft Hosted network is not available (CF00100E)

  Whenever I try to start a network hosted, I get an error message like "Microsoft Hosted network is not available". Any problem with my network card. I am currently working on Windows 8 operating system. Is it possible to solve?

  Hi Rithu,

  Try these steps and check:

  a. press the Windows key + R , type Devmgmt.msc to open Device Manager.

  b. click view and press on ' see the hidden devices.

  c. go down the list of devices and expand the "network devices".

  d. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  e. Select activate

  f. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  g. after that, the connection should be displayed.

• Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  I got this program for years.  Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.

  Hi lindat7439924,

  There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/

  Kind regards

  Meenakshi

• Network printer not available through Remote Desktop on some workstations

  We have workstations XP SP3, the latest updates, with a network printer that is attached to the whole. Printing works locally by all workstations
  but it does not work on some of them remote desktop. The printer driver is installed on the server.

  The workstations that cannot print remote desktop can see the printer but not with 'redirected' name.

  How can this problem be solved?

  Hi dragos3,

  See the Microsoft articles below and check if it helps.

  How to make a local printer available during a connection to a remote desktop in Windows XP Professional

  http://support.Microsoft.com/kb/312135

  Provision of local resources to a server terminal server

  http://TechNet.Microsoft.com/en-us/library/cc780664 (WS.10) .aspx

  Print to your local printer from a remote session

  http://TechNet.Microsoft.com/en-us/library/cc758836 (WS.10) .aspx

• Wireless network adapter not available on my Equium A300D

  Hello

  I hope you can help; I currently have the Toshiba Equium A300D laptop. He has a virus and corrupt 1 of my hard drives, I can now t use, however I installed the operating system on my other hard drive, everything was fine until I try 2 connect 2 internet, windows diagnostic the problem and said that he couldn't find the network adapter for my Wi - Fi t.

  Can someone give me help solve this problem?

  Thank you very much

  >.. .couldn t find my Wi - Fi network adapter
  Wireless network card recognized and installed correctly?
  What is the status in Device Manager?

  If everything is OK here I assume card WLAN is not properly enabled. At the first WLAN switch on ON position and then use combination FN + F8 to activate the wireless network card.

• Satellite A300 - WLAN networks are not available

  I have a satellite with an A300 unit init system and I'm trying to connect to the internet via Wi - Fi.
  My internet connection is all very well already phoned the service provider that everything is fine with it.

  When I try to connect 2 a network... no networks are available?
  Any1 no what I have to do?

  Wireless network card is installed correctly?
  Wireless network card is enabled?
  Check it with FN + F8.
  Is WLAN led on when you scan area available networks?

  Maybe you didn t turn on the wireless network card.

• "" Pavilion DV6 - 6033 cl: I get a message "My Bluetooth" that the Bluetooth radio is not available.

  Says Bluetooth settings

  Address of the device: not found

  The comuter name which will see other bluetooth devices: unknown

  The type of device that other bluetooth devices will see: unknown

  Allow bluetooth devices to find this computer: inactive

  show the bluetooth icon in the system tray: checked

  Inform me about Bluetooth connections: checked

  Activate the mode support high speed: checked

  Shows Device Manager:

  Bluetooth rAdios

  Generic Bluetooth adapter-device is not working properly.

  Under move the tab name, address version, manufacturer ID, HCI, LMP version have all entered data

  Driver files C:\Windows system\Drivers\bthport.sys,

  System\Drivers\BTHUSB.sys C:\Windows,

  System\Drivers\fsquirt.exe C:\Windows

  Microsoft Bluetooth enumerator

  Thank you for your response. I tried a few more things from the detachment and now have blue tooth work. The first thing I did was to restore my computer and that brings back the original bluetooth - a Ralink Motorla BC8 Bluetooth 3.0 + H adapter.  Since the device manager says that this device is not functioning, I finally felt that there had to be something simple it can't connect. I tried a Windows 'Bluetooth' and found a Bluetooth Setup program. When I ran this problem has been completely resolved. Thanks again for your attention to this problem.

  Before you buy mouse logitech, bluetooth was working. I don't know why it stopped, but probably because of things that I did to try to make it work, I compounded the problem.

• JLab GO earpiece/headset Bluetooth connected but not available for audio playback

  I have connected the Bluetooth device and you can see the two Bluetooth devices as well as devices and printers.  But when I go into Control Panel and sound is not an option for playback or recording.  I uninstalled the device and repaired.  I also entered in the properties of the device and the Services tab and activated flow hands-free calling, Audio, headphones and remote control.  The device works fine on my 2 Surface Pro and my LG Android G2 phone. Any ideas would be greatly appreciated.

  Hello Pierre,.

  Thanks again for the response.

  I suggest you try using the steps described in this article and check.
  Reference:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

  I hope this information helps.

  Thank you

• Re: Satellite C850-1MC - Bluetooth function is not available

  Hello

  I can't find the bluetooth on my Satellite C850-1MC feature

  I checked and my laptop is equipped with bluetooth, and indeed, in the past, I saw an icon in the lower right window of my laptop.

  I recently looked to use the bluetooth feature and I'm at a loss in the place where to access it, all my attempts to find it in the control panel have been in vain.

  Any thoughts greatly appreciated

  Thank you very much

  Eldon

  Hello

  Bluetooth must be enabled first in order to pair the two devices via Bluetooth.
  To activate the BT, you must use the function keys FN + F12 (This activates and disables the internal Wi - Fi and Bluetooth modules)
  ?

• Impossible connecting to "fix it online." "Signins other Live" are OK - get the message "the Windows Live network is not available on this site.

  Get the message "the Windows Live network is unavailable on this site".

  Hello

  The question you have posted is related to windows live and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• How to stop PC if the network is not available until 30 minutes

  Hi all

  I use vista 32 x Home premium sp1 and model of the laptop is hp dv4 series 1318tu. I need to download a 2.9 GB file. I started my morning from 06:00 download and I have to go to school. I want that in my absence, if the network is disconnected (may the light goes out or the network connection error) up to 30 minutes, then my computer is turned off automatically. is it possible to task schedular? still is it also possible that if the (ac) power is restored then my computer automatically starts and connects to the network to download the torrent file.

  Hi Amarjeet Anand,

  Unfortunately, he has no way of creating a task using the Task Scheduler.

  You may need to find some third-party programs online to achieve this.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DMZ connected network is not available

  My configuration:

  PIX - servers with gateway as pix - DMZ dmz - remote router - remote LAN

  When I try to reach remote LAN to dmz servers that I'm not able to reach.

  My servers have pix as gateway.

  PIX has road for Remote LAN. (PIX I n t have no problem to reach remote LAN)

  When I add remote LAN-specific routes pointing to local router then I n t have problem to reach the Remote LAN.

  My problem is the why of the pix as the gateway server not able to reach remote LAN.

  the problem is related to the v6.x pix golden rule.

  the golden rule does not fundamentally pix redirect the packets in and out the same interface. for example, server dmz try to send a packet to the remote lan. for now, dmz server has a default gateway for the interface of a pix dmz, dmz server passes the packet to the interface of dmz pix to begin with. PIX receives the packet comes from the dmz server and the remote lan. now, pix determines the next hop for this particular package is the router in the dmz, which is once again through the DMZ interface. as mentioned, the golden rule does not allow this operation because the packet is received on the interface of a pix dmz.

  the workaround, as mentioned earlier, martin is to change the default gateway on the dmz server. the default gateway should be the router in the dmz, then configure static routes on router.

  now, there are two choices with regard to the configuration of the ports on the router.

  a: Configure the pix as the gateway router dmz dmz interface by default and configure the static route to the Remote LAN. or

  two: Configure the remote router as the default gateway of the router dmz and configure a static route for pix inside the net.

  personally, I prefer the first options as server dmz may need access to the internet via the pix as well.

  leaving again watching the flow of traffic to dmz, DMZ router as the default gateway server; router DMZ with interface dmz pix for the default gateway and the static routes for remote lan.

  package from Server dmz for the lan remote will be forwarded to the dmz router. DMZ router will then forward the packet to the remote router based on the static routes; Alternatively, package from Server dmz to the internet or the pix inside the subnet will be forwarded to the dmz router. the dmz router will then package the pix dmz interface based on the default gateway settings.

• Bluetooth: not available

  My bluetooth appears as 'not available '. I already ransacked the com.apple.Bluetooth.plist and reset my smcand did a reset, but the problem remains. I own a macbook pro 13 "(early 2011) with el capitan installed 10.11.6 recently." Other features include:

  Processor: Intel Core i5 to 2.3 GHz

  Memory: 16 GB at 1333 MHz DDR3

  Storage: 512 GB SSD (360 GB available)

  I checked my hardware and it says "none found information" under bluetooth.  I have never had problems bluetooth before and don't know if it's related to the installation of el capitan, but I know it worked before the upgrade.  I don't know when it has stopped working since the update.  Any help would be appreciated.

  You'd better take a Genius Bar appointment or contact Apple support, they have a special utility that could detect the problem.