Bluetooth on office jet 150 does not connect

Similar Questions

• HP Laser Jet Pro M127fw MFP: HP Laser Jet Pro does not connect to applications so I can't scan

  All of a sudden my printer connects to the apps, so I can't scan. He linked it to the good apps until all of a sudden it stopped. I turned the printer power off and power on. Tried turning off the power applications, then on but it does not connect. I'm connected wireless. What can I do?

  Hello

  Make sure you have the latest firmware to keep the connection of web services:

  http://FTP.HP.com/pub/softlib/software13/printers/IPG/M125/LJM125_M126_M127_M128_Series_FW_Update-20160622_signed.dmg

  The last firmware datecode is 20160622, you can find the current firmware for your printer datecode by clicking Setup > reports > report of Configuration.

  The current datecode is listed in the printer information section.

  Kind regards

  Shlomi

• Bluetooth device is paired but does not connect

  Hello

  I have a DELL Inspiron 15 laptop and I have windows as operating system 8.1. After the update to windows 8.1 that I am unable to connect to a Bluetooth device, although getting paired do not connect. I tried and find all the solutions on the service check and update the drivers and everything is in sync, but I am still unable to connect.

  Hi Harshank,

  Thanks for posting your query on the Microsoft Community.

  This issue may arise, when the Bluetooth drivers are not updated.

  Please provide the slot details, to help you best.

  (1) have you installed the latest drivers for Bluetooth?

  (2) what device you are trying to connect with your PC via Bluetooth?

  I suggest you to download the latest Bluetooth drivers on the manufacturer's Web site and check if it helps.

  See the link below to download the latest version of Bluetooth driver:

  http://www.Dell.com/support/article/us/en/19/SLN113225/en

  If the problem persists, ask Op to install the driver in compatibility mode and check.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  It can be useful, we meet with the status of your question. We will be happy to help you.

• HP Jet 7 does not connect to internet

  Just bought a HP Jet 7 tablet. WiFi connects to the router, but shows limited, access unless I have disable Bluetooth. Once off, it says I have connection complete, but then failed to connect to the net via IE, store or anything like that. Had the tablet in hand for 4 hours and have not been able to get on the net with her yet. Have also reinstalled the drivers for the Realtek card, that made no difference. Any help would be greatly appreciated!

  You should not really joking with pilots until we know all aspects of the material and tested packages of drivers. The drivers provided with it should work fine. It does not sound like having however a defective unit. You can try to connect to public wifi to see if it's just a strange mismatch with your router, but if she does all the wifi, then you don't have much choice but to replace.

• Devices bluetooth audio seen paired, but does not connect unless that selected

  iPhone running 9.3.3

  Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

  I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

  Thank you.

  Try control centre. Swipe up from the Home button

  

  This screenshot of my iPad, it's the same on iPhone

• HP Office Jet 3830: Printer not connected

  I just installed this new printer, followed all the instructions in the manual and website, downloaded the latest update.

  Checked everything with the Setup Wizard, and he says that everything is ok.

  YET, when I try to print anything, it indicates that the "the printer is not connected"...

  I restarted my computer and also to restart the printer. Nothing has changed...

  I need to help and suggestions to solve this problem.

  Thank you

  Lewis

  Hey @lbriskin,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that your Macintosh OSX 10.11 computer detects a printer all-in-one Officejet 3830. I can help you with that.

  First of all, let's see if the problem can be related network or Mac related. To do:

  Turn the printer off for a minute.

  While the printer is off, remove the power cord at the back of the router for a minute.

  When the lights came on your router on the printer.

  Now, let's see what the printer think, that is the question. Click on the wireless icon that looks like a radio tower in the Middle at the bottom of the screen.

  The next step depends on the IP address on the printer display.

  • If the IP address starts with 169.254, then the printer does not receive a valid IP address. Click the gear icon and select Wireless Setup Assistant to connect again. If the IP continues first 169.254 then the next step is to contact your internet provider because you have a device that will not receive a valid IP address of the router. If this is the case, then I would suggest calling a device and not a printer. If you say printer they say talk to HP and want to terminate the call.
  • If the IP address starts with 172 the printer is connected to a network of comments. Contact the company that you provided with the router for assistance with deactivation of the feedback network.
  • If the IP address begins with 192.168 or 10 then the printer IP address is fine. The next step would be to determine the issue on the Mac.
  • If the IP address begins with any other number then the network has somewhat changed. I would contact who is now the network for assistance.

  Assuming that the IP starts with 192.168 or 10 the next step would be to reset your printing system. To do:

  On the Mac, click the Apple icon, system preferences and printers and Scanners.

  Hold down the command key and click the picture of the printer on the left side of the screen.

  Click on reset printing system.

  Click on the button "+" in the lower left corner of the screen.

  Select your printer from the list.

  Click on the box to use and select your printer from the list.

  Click on Add.

  If your printer was not in the previous window, it means that there is a setting on the network that prevents the Mac and a printer to communicate. I communicate with the one that is provided with the router and ask them to open all Ports, enable multicast, MAC disable the filtering/MAC cloning and make sure that the router broadcasts a band of 2.4 GHz (gigahertz).

  At this point, you should be able to print. If you are not able to print then please let me know what happened by following these instructions.

  Please let me know if this solves your problem or if you have any other questions. If not, have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Office Jet 4650: Office Jet 4650 does not print web pages

  Just set up a new office jet 4650 printer, and I can't seem to print web pages.  Another impression seems OK, but can't get an answer at all when you try to print a web page.  In addition, just installed OS 10 Windows on the computer.

  Can now print.  "PRINT" key was hidden under another page.  Still difficult to reach PRINT button, but I'm working on it.

  I'm sorry to bother you.  Thank you for the city.

• Office Jet 6600 does not print web pages, word documents fine impressions

  Hello.  My Officejet 6600 will not suddenly print web pages.  It prints very well word documents. I have restarted my computer, restarted my printer and not better.  My wireless works very well - as I said, very well printed word documents.  Help!

  Kim

  Hello Kim, alias @Sydlor , welcome in the community of HP!

  I'm here to help you with your printing issue!

  As you cannot print Web pages, I think that the web browser or Web pages could be the root cause of the problem, however, I could certainly be wrong too. I think this way because normally when there is a conflict of printer driver, you would not be able to print from anywhere at all from your PC.

  I suggest that you try using another web browser and try your impression from here to test this theory.

  If you want to let me know the operating system you are running and what web browsers that you tried, I'll help more if necessary. Please let me know!

  

• Office Jet 5600 does not print color in color documents

  I just installed a new tricolor cartridge HP 22.  However, all prints come out in shades of black.  Appears that the color cartridge is not working.  What should I do?

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. On the front panel of the printer, press the SETUP (key key), then TOOLS > print head cleaning.

  Try the above steps 2 or 3 times.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'Accept as Solution', If he solved your problem, while others may find it.
  I work for HP

• iPhone 5 sec Bluetooth does not connect

  My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

  I was able to pair with my ipad.

  Hello

  Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Headset Bluetooth paired, but does not connect.

  I recently bought a pair of headphones Bluetooth (BT) to replace the ones I currently have. In any case, I have them connected to my phone, but now I want to use it on my laptop. It does not connect to it. He was just trying to connect to my phone. I even turned off bt on my phone, but the headphones does not connect to my laptop. I tried to go to the playback etc... devices and clicking on the 'connect' option, but it does nothing. Everything seems to work fine, except that! Help, please.

  Hi Tom,

  Please contact Microsoft Community. I understand that you have a problem with the Bluetooth Headset connection. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  To better understand the issue, let me know if you face any problem when connecting the Bluetooth headphones on another computer in Windows 7?

  This problem might have occurred because of these reasons:
  1. wrong settings.
  2 damaged material.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the corner hardware store to ensure that basic material settings are set correctly.

  Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest to return the item and make sure that the Bluetooth settings are set correctly.

  Add a Bluetooth device to your compatible computer device http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  See these articles for more information:

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows/change-Bluetooth-device-settings#1TC=Windows-7

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Bluetooth does not connect to the phone Moto G

  Bluetooth not connect to the phone of MotoGP

  How can I get there?

  Original title: bluetooth does not connect

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to connect to the Bluetooth.

  I will definitely help you with this.

  1. Do you receive an error message when connecting?
  2. Are you computer connection to phone with Bluetooth or other device?

  I suggest you go through the below methods:

  Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.

  Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.

  Method 2: activate Bluetooth Support Service.

  Follow these steps and check if the Bluetooth support Service is started.

  (a) press the Windows key + R, type services.msc and press ENTER.

  (b) make a right click on the service named Bluetooth Support Service.

  (c) check if it is started, otherwise click Start.

  Download and install the latest Bluetooth drivers on the manufacturer's Web site.

  Method 3: To add a Bluetooth device, see the following steps:

  Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:

  1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device

  2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.

  Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.

  See also the link below:

  https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.