Bluetooth overload

Similar Questions

• Re: Missing Bluetooth | HP ENVY 15-j026tx | Windows 8.1

  Pouf! No Bluetooth! Here yesterday, has become today!

  I'm having the same problem with a laptop Envy 17 T J 100...

  Bluetooth hardware simply disappeared after (I think?) a certain Windows update. Went live with chat support, they invited to uninstall then reinstall the networking and bluetooth drivers, ALL tried and did not get any advantage. The BIOS does not recognize that the radio-transmitter Bluetooth EXISTS in this computer. It was as if a gnome came to my house in the middle of the night, unscrew the lower part of the thing, has crawled around inside, removed the bluetooth equipment and replaced with a WAD of styrofoam.

  I KNOW it is Bluetooth inside the thing - say the plug; the order sheet confirms that I paid for it; I've used it before. I don't know when it came out, but when I tried to use it yesterday, it wasn't there. My area has had a problem with internet due to a storm, so I thought that I attach my cell phone and its data (via the cell tower) to my laptop for a little bit, see how it goes, but I noticed when I got the phone and the laptop next to each other, WHAT? BLUETOOTH NO MORE? BUT WHY?

  And I'm sure it's an update of Windows and HP incompatibilities, which are the culprits. Nothing yet HP or Windows programmers. It has something to do with the management of energy, maybe. But because I can not ANY software to ADMIT that the material EXISTS, there is no way to force-power for the equipment.

  BLUETOOTH HAS DISAPPEARED. DIFFICULTY PLEASE. Thank you.

  Rules

  To ensure a safe and productive forum, we ask that you follow these rules:

  1. be respectful. Respect your fellow users by keeping your tone positive and constructive comments. Good or bad, your experiences are always welcome as long as they are offered in a courteous manner. The respect people's time and attention by providing complete information about your question or problem, including the product name and model number. People like to help those who ask the right questions

  2. be relevant. Make sure that your contributions are relevant to this forum and to the specific category or Board where you post. If you have a new question, start a new thread, rather than interrupting a conversation. Solicitations guest members to join, participate, or buy something are never relevant.

  3. obey the law and respect your Word. Do not post anything that violates any law or any contractual agreement that you made.

  4. protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.

  5. remember that it is user generated content. You'll find lots of good advice here, but remember that your situation, configuration, or use can vary from that of the individual sharing a solution. Some tips you might find even wrong. Apply the same good judgment here that you would apply to information anywhere on the Internet.

  6. think before you post: you may not use, or allow others to use, your membership record to display or transmit the following:

  a. "rants", "slap" or legal threats against HP, another company or any person.

  b. political statements or commentary.

  c. off-topic comment not related to a technical problem or use a HP product.

  d. language that promotes illegal activity or discusses illegal activities with the intent to commit them.

  e. duplicate messages.

  f. hyperlinks that lead to sites that violate one of the guidelines forum.

  g. any message that solicits or encourages the use of an illegal substance.

  h. If you are an employee of HP, you must identify yourself as one. You should always be clear that you speak to you alone and not HP and follow HP policy.

  7. do no harm. You can not interfere in some way with the operations in the forum or with a message box from a colleague of the user, including, but not limited to, by mail or "post" bombing, bomb, bombing, other techniques flooding deliberate attempts to overload a system, broadcast attacks or attempts to avoid messaging blocking.

  8. do not artificially inflate the forum statistics. There are several place in the forum statistics used to measure performance and the overall health of the community. You may not deliberately trying to inflate a particular statistic to promote you in the community. For example, create a duplicate account in order to acquire more congratulations.

  9. collaborate with the administrators and moderators of the site. You can't circumvent bans or suspensions or otherwise do not take into account the directives of the moderators or administrators HP Support Forum.

  Thank you.

• Tethering bluetooth with Macbook Pro-, I can keep USB plugged after 100%?

  Hello

  I just got the z3. I noticed that when sharing the spot with my Macbook Pro 13, battery pretty quickly, even if I turn it on to 3 G. So I started tethering with my Bluetooth instead, because I heard that drains the battery a little less.

  My first question! Is the above correct?

  My second question - if I connect the z3 to my Mac via a USB (loading in the process) is allowed to leave the z3 connected once it reaches 100%, or do I have to unplug the unit and let it do more cycles?

  I know that the Mac will stop once it reaches 100% charge, but continue to use power - the z3 doesn't do the same thing, to protect the battery and to avoid overloading?

  Thanks a lot for your help!

  T

  Hello and welcome to the community!

  You will probably see a lower battery use when you tie over bluetooth instead of WiFi.

  The phone will stop charging when the battery is full, so you can leave it connected.

• Problem Bluetooth PRIV Smartphones blackBerry with the BMW 328 model 2013

  I tried several days get my PRIV to connect with my bluetooth and phone/book music and the only way to make it work is to disable the function of my phone. When I try to connect my BB PRIV to my car, there will be des-1001,-1002, etc., next to the bluetooth signal and after a few seconds he suddenly resets my car bluetooth system. There is no new update for my car system and I have never had a problem with other Android, BlackBerry, or even Apple devices. It's the first time that this problem occurs and it's phone contacts which are somehow overloading my car infotament system. However there is no way for me to specifically stop the phone contact because even though I do in the bluetooth on the phone settings, every time I get in my car it resets the permissions and tries to connect again AGAIN and AGAIN the cause of the problem. Please let me know if my phone is broken software wise, or if the application contact break you guys used somehow some systems of infotament of the telephone directories of car etc. Cause the phone book may never load and I tried several times to make it work.

  Hey, if I could get my phone with my car, including the audio both phone and bluetooth features. In order for me to get it to work I had to download the new firmware from

  http://www.BMW.com/com/en/owners/connected_drive_services/mobile_devices/bluetooth_software_update.h...

  I put the last seven digits of my vin number in the search and downloaded the update to a USB plugged on the center console of my car. Once it was done I tried to connect and to my surprise my contacts list appeared. I pulled the top of Spotify and it played without screaming and cutting. I tried a phone call, and it worked as well. I want to test a little on my lunch hour but well again.

  See if it works for you.

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Headset Bluetooth Plantronics travel legend not seen by iPhone 7

  It worked fine with the iPhone 5 s. No device sees the other.

  Hello

  Could be something in the instructions that will help here > Set install and use third-party Bluetooth - Apple Support Accessories

• Since activation apple CarPlay, my iPhone does not connect to my Bluetooth infotainment system

  I have recently taken delivery of a VW Tiguan MkII 2016 and could easily match my 6 s iPhone with it. Now, however, I created CarPlay Apple and VW car-net connect my iPhone via USB. Now my iPhone is no longer connect via bluetooth when not plugged into the USB port. It seems that I can now use only my phone by CarPlay which I do not plan to use whenever I drive the car. Is there a solution to this?

  Hi biker.

  I understand that as you have activated the Carplay, your iPhone will not connect to your car stereo via bluetooth. You can try to disable the Carplay on the device, and then test the bluetooth connection. Because you are trying to connect via clips and wireless at the same time, this can cause some problems. Using one or the other should solve this problem.

  Please use the Apple Support communities to post your question. Good day.

• issue of iOS 10 Bluetooth in car

  It seems that apple rushes on a product that gets worse and worse every time. How Bluetooth can work a day with ios9 then, not with ios10. Who can screw this up? You have already good writing... it hurts my brain that the company on top cannot get out of their own way and create a simple product to work more. It is God awful and obvious that they lack of any vision of the future.

  This article can help you get help to connect an accessory with your iPad, iPhone or iPod touch - Apple Support Bluetooth

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Bluetooth network is not available

  Been trying for a while to use AirDrop on my MacBook Pro (Version OS X El Capitan 10.11.6) and my iPhone 6 s more.

  Just realized today that it might not work because the Bluetooth on the Pro does not work. With each device I try a pairing, it says that the network is not available and that I need to make sure that network access is enabled. Trying to do this, system preferences > network > Bluetooth PAN, I get the same message. I need you to ensure that network access is enabled.

  Someone else had this problem? Any ideas on how to solve it?

  Open system preferences > Bluetooth. Make sure that Bluetooth is enabled.

• 10 IOS bluetooth problem

  Before you upgrade to IOS 10 both Iphone5s and 6 s more, bluetooth in my Nissan Murano 2013 worked perfectly. Now, pairs of thin phone and able to call but Bluetooth drops out when receive call and it happens on both devices IOS 10.

  Walks through the internet and we have tried all the recommendations to reset and re-pair the Bluetooth on the system of the car and the Iphone, but nothing helped.

  The following steps have been tried but compensate.

  1.

  -Forget pairing Iphone and car, turn off Bluetooth (reset Press Home + Power device)

  -Restart the car and re - pair again

  2.

  -Forget pairing Iphone and car, turn off Bluetooth (reset all settings)

  -Restart the car and re - pair again

  Borrowed from my friend Iphone5s who do not have upgraded to IOS 10 and paired the car and bang works perfectly.

  Someone else has the same problem?

  Hello

  See if there is something in this support article, you have not yet tried > get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

• Can I connect the watch or Bluetooth headset at the same time?

  The watch or Bluetooth headset (maybe a pair of the Airpod) connect at the same time?

  I have iPhone 6 now and will update to 7 earlier.

  I do it all the time with my iPhone 6. I assume you mean to plug the headphones into the iPhone, right? Whatever it is, you can connect to the phone or watch.

• Bluetooth Ipad pro

  I have had my iPad Pro for 6 months, I hunt bought a new Bluetooth headphones work fine on my iPhone 6, yet my ipad even not see this device, I tried my old Bluetooth apple keyboard and unrecognized, either. The only device with which it seems to establish a connection is my pencil of Apple. Is this normal or should I take it for repair?

  Reboot your iPad.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Then try these instructions for pairing bluetooth devices > Set install and use third-party Bluetooth - Apple Support Accessories

• iPad drops connection bluetooth/wifi for iPhone

  I keep my iPad connected to my iPhone all the time. I activate the personal hotspot on my iPhone and connect the iPad via bluetooth or wifi. Since the update to iOS 10 he constantly drops my connection to the iPhone. I've never had a problem before, it was always connected. Now, I have to reconnect throughout my day. Update my iPhone and iPad every week is always current.

  Hi cyberxxxaos,

  Thank you for your participation in the communities of Support from Apple.

  Looks like Personal Hotspot is periodically disconnect when used between your iPhone and iPad Air. As he worked with before reliability, we'll see if some troubleshooting makes a difference.

  Start with the steps described in the first two sections to help with Personal Hotspot in iOS.

  Let us know if these steps help you.

  Sincerely.