Bluetooth will not connect to an external speaker...

Similar Questions

• My iPhone 6plus Bluetooth will not connect to my headset, after having worked for 2 weeks, that has happened on 2 different pairs, now my new pair doesn't connect at all?

  My iPhone more than 6 is running iOS 9.2 where after awhile, it seems not longer connect to my Bluetooth devices. Now I have a new helmet and it won't even find them to connect.

  Replace the BlueTooth devices in pairing mode and they should reconnect.

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• Bluetooth devices will not connect after a long period of absence

  It started in the last 3 months, I'm not sure of that OS upgrade specifically.  I currently have Version 10.11.3.  I have a MBP late 2011.  I use a keyboard, trackpad and bluetooth magic, bought the same time as my mac.

  Whenever I come back from a business trip (usually a day or two max), my bluetooth keyboard and trackpad will not connect.  They appear in the drop down bluetooth devices, but when I select Connect, nothing happens.  I did everything the new standard batteries, SMC/PRAM reset, nothing helps.  I then manually have to pair them up with difficulty using Set Up Bluetooth Trackpad/keyboard.  It will show "found", then say could not pair.  I have the power on the devices several times his cycle, and then hold the power button 'on' to the pair.  Usually, it takes 5-10 minutes and is terribly frustrating.  Once I get the paired, as long as my stays Mac in the same room with the devices, they pair very well.  Appreciate the advice.

  99 + % of the time, there is a previous event - you indicate that this has been the case for «...» 3 months... »

  What event would it? Upgrade to El Cap? Nothing at all you can think of that has occurred "3 months ago"

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• Why my computer will not pick up my external hard drive?

  Why my computer will not pick up my external hard drive?
  using Windows 7 sp1

  Original title: usb

  Hello Fred,.

  Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

  1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

  2 do a reset power coercive.

  1. Unplug the power cord. Then (on a laptop) remove the battery.
  2. Unplug all USB devices.
  3. Leave it alone - don't connect or reconnect the devices for several minutes.
  4. After several minutes plug the power supply cord.
  5. Then install the battery.
  6. Turn on the computer and restart as normal without plug any USB device.
  7. Connect your devices one at a time and let them install as usual.

  The external hard drive works now? If not, go to #3.

  3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

  I would like to know if one of these methods works for you. After back here with your results.

  Kind regards

  BearPup

• Bluetooth does not connect to the phone Moto G

  Bluetooth not connect to the phone of MotoGP

  How can I get there?

  Original title: bluetooth does not connect

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to connect to the Bluetooth.

  I will definitely help you with this.

  1. Do you receive an error message when connecting?
  2. Are you computer connection to phone with Bluetooth or other device?

  I suggest you go through the below methods:

  Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.

  Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.

  Method 2: activate Bluetooth Support Service.

  Follow these steps and check if the Bluetooth support Service is started.

  (a) press the Windows key + R, type services.msc and press ENTER.

  (b) make a right click on the service named Bluetooth Support Service.

  (c) check if it is started, otherwise click Start.

  Download and install the latest Bluetooth drivers on the manufacturer's Web site.

  Method 3: To add a Bluetooth device, see the following steps:

  Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:

  1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device

  2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.

  Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.

  See also the link below:

  https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• iPhone 7 will not connect to iTunes - request for the new version, but everything is up-to-date

  My new phone will not connect to iTunes on my computer windows laptop. It is said that it requires a newer version of iTunes but the latest version is all ready to date

  Is your "new version" iTunes 12.5.1.21? If this is not the case, your 'windows' laptop running Windows XP or Vista?

• How is it that my iPod Shuffle will not connect to my radio?

  How is it that my iPod Shuffle will not connect to my radio?

  Don't understand the question...  How you expect an iPod shuffle to connect to a radio?

• iPad will not connect to internet

  Hello

  Recently I replaced my router wireless with an old faithful that d-Link DSL - 502T cable modem as I have now 2 extreme airport to handle a Wi - Fi. I have now a much faster internet access on my Macbook Pro, but my iPad 2 now will not connect to internet.

  Airport utility on the iPad shows that the internet is disconnected, but I don't know how to solve this problem.

  The two airports are configured in Bridge mode. Help someone?

  If you have LAN - 502T running as the main router.

  Bridge the airport should simply pass the DHCP via the Dlink but sometimes it's a failure.

  The two AE connected directly to the modem or the other?

  I would recommend the static method of intellectual property.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  In this method, you must first AE plugged directly to the Dlink and the second AE connected in the first and bridge... it will dhcp to EI and is often a better configuration with Apple gear. Worth a try.
  

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network