Bluetooth will not play through JBL S200

Similar Questions

• Voicemail will not play through bluetooth car

  I have a Moto X (Sprint) and it won't play my voicemails via Bluetooth... Worse that this, because I'm connected to bluetooth in the car, I can not play through the phone that either will I am in the car, everything is running... Does not work on buick Enclave wife either.

  Even the phone works fine, even a text for voicemail system on Buick is working well!

  Help!

  You are also able to use it during a call? You use stock voicemail (component number) or some visual voicemail application? You have the features A2DP (ability to listen to music via bluetooth from your car)?

• IMAPS will not play through radio

  I have cards will not connect with radio either bluetooth or cable

  Hello paddymac2,

  Thank you for using communities of Apple Support.

  I understand that you do not hear the guests of navigation Maps through your car stereo.  If this is correct, then I suggest you activate the option "Allow HFP Prompts" as shown below.

  Allow guests HFP

  When supported by your car, hands free (HFP) allows navigation invites you to play through your car speakers when the iPhone is not selected as the audio source. With allow HFP lit guest, you can have your car stereo source on a non Bluetooth such as your car radio or satellite entry but still receive turn-by-turn directions on your iPhone or iPad via your car stereo speakers.

  The HFP function depends on your car stereo and your iPhone or iPad must have iOS 7. 1 or a later version. If you don't see the HFP parameter when your iPhone is connected to your Hi-Fi, check with the manufacturer of your stereo.

  Use the cards and Bluetooth on your iPhone or iPad

  On the other hand, if your iPhone is not recognized by your car radio, and then follow the troubleshooting in the link below:

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Take care.

• FUZE 8 GB will not play through a usb cable, passage in charge mode

  Is it possible to plug a USB cable into the ROCKET and make him play through it?  I have an FM transmitter in my car with a remote control, but it works only if connected with a USB cable. I now use it via the headphone jack but want to use the remote control. I just upgraded to firmware hoping it was a bug, but will still support once the USB cable is plugged. Thank you

  I'm not sure what you mean by "Play through the USB Cable"

  Inside that cable companies have four sons:

  Two provide 5 volts, which will load the "rocket" but still allow him to play.

  Two others are the USB data lines, which will allow your PC to read and write data files.

  While these are connected the "rocket" appears as a storage device and play any music.

  There is no audio cable in the USB cable stock.

  When I connect the "rocket" in my car, I have only power connected, it plays music very well and recharges its battery too.

  Even if the "rocket" is connected to anchor the Sansa, you can not play music if the USB cable is connected to

  a computer. There are additional connections in the 30 dock connector line out pins, like headphones

  selector and a few pins communications for the remote, but the stock USB cable does not work

  touch these extra pins. So unless you have a Sansa dock, or maybe one of the Altec-Lansing dock units.

  You probably don't have access to people.

  I hope that helped.

  LyleHaze

• clip + will not play through the car usb connection

  I just bought a clip + to play in a car I just got.  The car has a USB connector that allows radio control to the player.  I loaded songs, all mp.3 off, on the 8 GB drive and tried to play through the car.  He plays for a few seconds then stops and freezes apparently.  The title of the song appears on the radio, but after a few seconds it seems to be stuck and nothing happens and the controls to change the songs don't work, as totally frozen. .  The Player keeps alternatiing between saying 'read' and 'write '.  This is my first mp3 player so I have no idea.  If the 8 GB is too big?  The player is 80% of the full

  What USB mode on the Clip (under settings) is set to?  You can try to change the setting to the other USB mode.

• Speaker blackBerry VM-605 Smartphones will not play through the car radio

  Greetings:

  My new pairs of speakerphone VM-605 fine with my Tour 9630 (Verizon) and works fine for calls via the microphone/speaker.  However, I can not play music files or Slacker Radio by radio of my vehicle.  I followed the instructions and all the right lights are lit on the WM-605.  I have it tune the freq announced by the VM-605 and the station with no signal broadcasting already there, but then nothing happens.  I repeatedly hit the FM button and tried different freqs, but no joy.

  Help!

  I just play a song first, then power up the VM 605 once he turns on and says connected press the FM switch and listen to it on the radio.

• Microphone will not play through speakers on my Vista x 64 laptop! + Solved +.

  Hello. I have a problem with my audio controls. I prefer to play my DS and other devices through the speakers of my laptop, but the problem is that my entry is silent and don't try even to tell me to go to the Control Panel, the only setting under 'levels' for my speakers the volume. Is it all fix regedit or driver for it? According to my specs is there anything hardware related, a pilot, or is this something that Toshiba screwed with as they put in place the operating system?

  Thank you.

  My system features:
  Toshiba Satellite M305D-S4831
  Vista Premium x 64
  Processor: AMD Turion Dual-Core RM-70
  Sound card: Conexant HD SmartAudio 221
  Memory: 4 GB of RAM

  I gave up Vista for windows 7 RC1 and it works perfectly now!

  Hi Sniper

  There is not an option at this time in Windows Vista to enable this feature.  It will have to be an option that is enabled through software/driver for your sound card.  You can consult the site Web of Conexant and see if they have an updated driver or a software package that could add the feature you're looking for.  Please let us know if you have any other questions.  Thank you. Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AfterEffects cc 2015 will not play through soundsticks

  Just upgraded to AfterEffects cc 2015 and cannot get the audio playback and preview to come through my Harmon Kardon soundsticks.

  AfterEffects CC 2015

  iMac Intel Core 3.5 GHz 17, 32 GB of ram

  10.9.5 OSX

  I can get audio through built-in speakers, but it's not the quality I expect - all other audio comes through the soundsticks.

  I work on an animation project, have come to rely on the soundsticks working with AfterEffects during preview and cleaning.

  Worked fine before the update.

  SoundSticks do not appear in the preferences: Hardware Audio/preferences/AfterEffects

  If I set preferences default input/output of the system, I get no sound at all, if levels and waveforms to register.

  If the value built in output I get only the built-in speakers.

  Any ideas? Is there something that I am missing?

  Thank you!

  I had the same problem.  What you need to do is to go into Setup Audio MIDI on your OS X and in audio devices change the .hz to a lower setting soundsticks - 48000 or 42000.Hz.  Now, they work fine on my machine.  I hope this helps, it's really frustrating when an update of something effects greater than audio playback with a warning message and I feel your pain!

  M

• background sound will not play through...

  Forgive me if this has been asked before... I typed in "background" on research for reminder only, and he gave me 0 results.

  in fact, I get a kick out of this...

  but, I have together audio as 20 second clip, continuously in a loop until a selecttion is made and it starts up fine, and it thus loop. However, when I select any selection on my menu, the clip starts at 0:00 new is there anyway to scroll all the menu choices on the screen given without it restarts?

  I chose different settings in the properties of the menu and still nothing.

  -This is just an excerpt from yet, or do you have built the project on disk or .iso and tested in software or hardware players (or both)?  If you have not tested with a mounted .iso image or a RW, please try to see if all goes well.

  -Jeff

• Why audio will not play when to jog through the window of sequence?

  I only noticed this recently, but for some reason, jogging frame-by-frame in the sequence window will not play the audio portions of the project. Is there a way to fix this in Adobe first Pro CC 2015?

  Audio is playing while Scrubbing verified?

  

  MtD

• iPhone 5 s will not play with lightning cable 30 pin to the Apple Dock to stereo is there a setting I need to change?

  I'm an iPhone 5 to 30 pin docking station with a 30 Apple stem to connect to cable of the lightning. The audio is not played through the docking station. He plays on the speakers of phones. Is there a setting on the iPhone I need to change? The stereo docking station works with my old iPod 30-pin. I turned off Bluetooth and it did not help. I use the Amazon music app. It's iOS 9.2.1 podcasts will also not play through the docking station. Music and podcasts will play through the cable that connects the docking station for stereo if plugged into the headphone. However the sound is not as strong or as good.

  Can you connect the speakers to the phone via Bluetooth docking station?

• BluRay will not play

  Hi guys N gals.

  I recently bought a laptop HPdv51183cl, complete with training Optiaric BD rom BC - 5500 s, graphics card Geforce 9600 GMT invidia, 2 x Intel (r) Core 2 duo CPU P7350@2ghz and a 320 HD.

  The problem I have is that I can't play Bluray movies on my laptop. He will play the trailers but when it comes to the main sequence, no joy. I can't access the menu movie even. Infact, the only thing I can do is to stop the disc and eject the disc. The software installed to play Bluray is Quickplay, which launches automatically. I have updated the software of 3.7.5822. but still no joy. I even downloaded Arcsoft total medai player 3.5 at the request of a techie of HP, but it won't even throw the disc.

  I talked to a HP technician online and through various software installs, uninstalls and reinstalls from the date of purchase, but nothing is done, they could not help me

  Everyone out there encountered the same problem, if so did you fix and if you did how. Any positive contribution or information you can give me in what concerns my dilemma would be apreciated.

  Thanks Steve

  What Blue Ray movies have tried to play?

  Because:

  Some discs Blu - Ray, like Spiderman 3 , won't play at all on a Blu - Ray player. Other discs Blu - Ray, like 03:10 to Yuma , will play the previews and the title menu, but pressing the play button will not play the movie.

• can see iPod, but it will not play

  I have a 2012 Ford Fusion sync.  When I plug my iPod nano into the usb port I can see my songs, but they won't play.  I can scroll through the songs without problem and can even use voice control to bring up the songs, but they won't play.  It's as if they are a of breaks.  I pressed the pause button and the Word pause appears in the display.  I press it again and it goes, but the song will not play.  I've replaced the usb cable, but I get the same results.

  Someone at - it ideas?
  Thank you

  Hello

  You must check with Ford and iPod Support.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I went to download songs on my phone from windows media player, but they will not play. How can I play?

  I went to download songs on my phone from windows media player, but they will not play. How can I play?

  Hello

  1. what version of Windows Media Player is installed on the computer?

  2. what happens when you try to play the songs?

  3. do you receive any error messages?

  4. have you already check the manual for the type of files supported by the playback device?

  I suggest you to check if the file format is compatible with the unit for playback.

  Reference:

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992

  (Do not run the FIXIT, close the pop-up window and go through the article for more information on the different types of files supported by Media Player.)

• Pavilion 500 - 205t: new Blurays will not play, older Blurays will be. Why?

  I bought your desktop of Windows 7 HP custom year last with a built-in Blu - Ray disc/drive. The player is CyberLink PowerDVD 10. A whole new movie bluray (2015) will not play because PowerDVD wants to update, but there is no update available through the recommended procedure. CyberLink said to check with HP.

  My oldest blurays (2013 and older) work very well. I don't need fancy features, I just want to watch my new bluray on my computer. I'm guessing that there is a new coding on the blurays newer that it prevents play on an older player, but what are the options I have to solve this problem?

  It is disappointing that less than a year after that HP gave me 10 PowerDVD pre-loaded, he won't play a new bluray. And on top of that, there is already a 15 PowerDVD! But I can't upgrade to that without buy download. I never had this problem reading DVD on my laptop XP with WinDVD for almost 10 years! WinDVD less at upgraded itself.

  Hello

  Have you applied this update from Cyberlink?

  New codes for Blu - Ray, AACS are constantly updated and Support HP should be able to help with the updates if your PC is still under warranty.  If your PC is not covered by the warranty, then you need to update from Cyberlink.

  You could try to update the HP Support Assistant and see if the Cyberlink updates are available.