BluetoothNotificationArealconWindowClass: explorer.exe Application error

Hello

My laptop under Win7 recently became unstable, crashing every day if you use Firefox or Chrome and sometimes Excel.

The last message box had the legend above.  He also says:
"The instruction at 0x72C9D1CF referenced memory at 0x72C9D1CF. The required data were not placed in memory because of an error of e state / of 0xc0000056.  Click OK to terminate the program"

I ran diagnostic checks, digital, etc. defragmented disk.

The computer does not have Bluetooth so I wasn't using it.  Was not using Internet Explorer or Windows Explorer so I'm mystified the message.

Thanks in advance for your help.

Chek out:

http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c00045315&LC=en&cc=us&DLC=en&product=1156659

http://support.Microsoft.com/kb/883258

Tags: Windows

Similar Questions

  • Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be "read".

    I am running Mirosoft Windows XP Professional Version 2002 Service Pack 2

    Before that, I really want to customize my windows and then I search in google "how to customize windows xp visual styles. After that, I follow the 7 steps how to customize. This is the link I will:
    http://www.WikiHow.com/customize-Windows-XP-visual-styles
    Then, after I followed the steps, it asks me to install this: Neowin patch. When I installed it, it says that my OS is not original, but I just reinstalled the last time.
    Are the cause of the problems of the patch that I installed it in the first place?
    Is it related with my OS?
    How to solve this problem?
     
    URGENT!

    Hello

    Thank you to contact Microsoft Community and we will be happy to help you with your concern.

    According to the description, it looks like you are facing a problem with the Windows XP operating system.

    It would be great if you could answer these questions to help you further.

    1. When you receive this error message, Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be 'read '?

    2 is the issue limited only to Neowin patch installation?

    There could be a conflict of memory with a driver or due to the bad memory or memory.

    I recommend you to check with the activation status of Windows XP.

    a. Click Start.

    b. click on all programs, then accessories.

    c. click System Tools.

    d. click on activate Windows.

    Windows XP Visual Styles, see the steps in the following Microsoft article.

    http://msdn.Microsoft.com/en-us/library/aa289524 (v = vs. 71) .aspx

    http://msdn.Microsoft.com/en-us/library/5d1acks5.aspx

    Keep us informed on the status of the issue.

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • Explorer.exe - application error

    I downloaded Internet explorer 8 for windows xp, after the system restarted, a pop-up box appears which says 'explorer.exe - application error. The application failed to initialize properly (0xc0000005). Click on OK to terminate the application. "there are no icons on the desktop so I can't even in the Panel of control etc. How can I get this sorting?

    Hello DF2012OZ,

    You are able to get in Mode safe?

    If so, check in the case of the newspapers to see if you can see a similar error message. It can give more details.
    Then try to run Chkdsk to check for errors. Right-click your drive, go to properties, tools and error checking.

    You can also do a system restore to get back before you receive the error in the Solution Explorer.

    Article number: 306084 - How to restore Windows XP to a previous state
    http://support.Microsoft.com/kb/306084
     
    Let us know if that helps.

  • "Explorer.exe - application error" code 0x032d0fef

    Hello

    I have a problem with my windows 7 professional service pack preload. Sometimes I open a windows folder displays an error message "explore has stopped working... and then he retrieve as Explorer begins with success...» Sometimes give a warning entitled... "Explorer.exe - application error.

    and contains "the instruction at 0x032d0fef referenced memory at 0x032d0fef. The memory could not be written. Click ok to complete the program." While what happens sometimes, I will shut down my system.
    Can anyone give a solution for this?

    The module that seems to be the question is the UninstallExplorer32.dll:

    Fault Module name: UninstallExplorer32.dll_unloaded

    The UninstallExplorer32.dll seems to be a component of IObit Uninstaller:

    http://SystemExplorer.NET/file-database/file/uninstallexplorer32-DLL/21192656

    Can you try to update or, if necessary, uninstall IObit Uninstaller.

  • Explorer.exe - application error failed to initialize properly (0xc0000022)

    Help!

    I don't have any idea what to do! my computer is not working the 'start' box disappeared also a text box comes up saying error explore .exe-application failed to initialize properly (0xc0000022) click ok to finish then all I get is a black screen. I tried to restart and it says it is update 1 of 3, then stops, but when you next turn to the new it still does not work.

    Hello

    that is 'safe mode' - did you try to run?

    How to run WIndows Vista "safe mode" is here: "".

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    and in 'safe mode' (if it works) try to run "System Restore":

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    part

    How to start the system restore?

    LC

  • "Explorer.exe application error"(0xc0000022). "

    I use Windows vista and because of the failure of my computer was improperly arrested and when I tried to it turned on I got this error message explore .exe-application. (0xc0000022), the application doesn't have to initialize correctly. Click ok to close the application, 1) window a work stoppage.  2.) window checks to the solution to the problem. (3.) a problem caused blocking the program works correctly. The window close the program and notify you if a solution is available.4.) Report of the programme and the solution: a) the window update... (these are the messages that I always get every time I tried to log on or every time I re start the computer.) I tried to click on the window updates, but it does not open as well.

    My computer is not back to normal so far. the screen stays black and I see not all destop icons too

    Hello

    The best way would be here to check in SafeMode if the same error is displayed.

    Step 1:

    To enter safe mode, please see:

     

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    If you managed to get into safe mode, follow the instructions in the article below to scan System File Checker. This analysis for any damaged system file integrity violation and repairs if there is.

     

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

     

  • 0x100072a7 and to 0x100072a7 insturction explore.exe application error

    Identify corrective actions their memory could not be read

    Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.

    Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.
    Try a clean boot, or boot into safe mode.  The behavior persists?
    If you continue to experience the problem, consider creating the hierarchy of following registry keys in the registry:
    HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\
    In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata.  Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen.  It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrive file and provide a link.
    (Letter is an environment variable that represents the system drive, usually C:.)
  • Explorer.exe - application error, the application was unable to start correctly (0xc0000022).

    I get this error after I entered my password to connect. Then the screen goes black. I can hit ctrl-alt-del to get the menu, but no matter what link I click I get the same error code. I use the 32-bit version of Windows 7.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Whenever the browser opens, I get an error saying: "Explorer.exe" application crash

    Original title: I get an error saying: "Explorer.exe" application crash

    Whenever it opens explorer, I get the error below and it remains my explore

    I get the error message is the following:

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: explorer.exe
    Application version: 6.0.6002.18005
    Application timestamp: 49e01da5
    Fault Module name: StackHash_b61d
    Fault Module Version: 6.0.6002.18327
    Timestamp of Module error: 4cb73436
    Exception code: c0000374
    Exception offset: 000b06fc
    OS version: 6.0.6002.2.2.0.256.1
    Locale ID: 2057
    Additional information 1: b61d
    More information 2: 167a8c47623c2496d77676b17616bd5b
    3 more information: ae0a
    Additional information 4: 8785af56cd014fa3319b3e04d072db96

    Please let me know how I can solve this problem.

    Thank you

    Sam

    Hi Sam,

    Do you remember what makes any agreement, changes this question?

    Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:  Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

     

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  • Application Explorer.exe (oxc0000022) error

    Original title: Explorer.exe application (oxc0000022) after an abnormal shutdown on Vista error

    After my child presses the button market stop on my Control Strip, I rebooted my computer and got this message. I use Windows Vista! Application error Explorer.exe (oxc0000022), I tried the system restore to an earlier date, but I still could not load windows except Mode without failure. How can I solve this problem?

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • I get an error saying: "Explorer.exe" application crash

    original title: APPCRASH Explorer.EXE

    About 1 week from today, I tried to open my control panel and folder on my laptop and continue to receive the error shown below and it restarts Explorer.EXE

    I have Window Vista (Home Edition) 32-bit Basic on my PC.

    The message I get every time:

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: Explorer.EXE
    Application version: 6.0.6002.18005
    Application timestamp: 49e01da5
    Fault Module name: ntdll.dll
    Fault Module Version: 6.0.6002.18327
    Timestamp of Module error: 4cb73436
    Exception code: c0000005
    Exception offset: 00048822
    OS version: 6.0.6002.2.2.0.768.2
    Locale ID: 1033
    Additional information 1: fd00
    More information 2: ea6f5fe8924aaa756324d57f87834160
    Additional information 3: fd00
    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    I searched the similar problems here and checked to see if none of the suggestions work, and they did not.

    Could you please tell me why my PC do all this suddenly and does so whenever I try to access My Documents, Control Panel, etc..

    Please help me with this so I don't have to wipe my hard drive and reinstall Windows Vista!

    Thank you

    Michael L.

    Problem has been resolved. A purchase price comparing the toolbar got installed on my computer without my knowledge.

    I ended up having to change my registry to remove it.

    Now I can open all my files and the control panel etc. and receive no APPCRASH.

    The program was Dealio Toolbar

    Michael L.

  • IEHelper Acrobat: iexplore.exe - Application error

    Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

    The memory could not be 'read' "what should I do?

    Which version of Acrobat reader you have installed?
    Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

    All that s

  • When I try to log on my "HP Pravillion 553w" userinit.exe Application error comes up and asks me to click ok to terminalte request. What can I do to connect to my computer?

    "When I try to connect my computere"HP Pravllion 553w"userinit.exe Application error comes on and says" application failed to initialize, click on ok to terminate the program. I just want to open a session. I don't know what made it? can someone help me please.   Georgia

    Hi, Georgia,

    This could be a limitation of the fast user switching feature.

    The fast user switching feature may not work if there is insufficient computer resources to create a new Winlogon service thread. When there is insufficient resources, the system may stop responding (hang), the system may lock up computer or the user may receive a Userinit.exe error application and the following error message:

    The application failed to initialize properly (0xc000012d)

    Method 1: In these cases, some users must log on to the computer, or you must close some programs to free up the resources of the computer.

    For more information, see:

    A discussion on the availability of the fast user switching feature

    This problem may also occur due to registry settings incorrect shell.

    Method 2: Try the steps listed here.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

    To resolve this issue, follow these steps:

    a. press CTRL + ALT + DELETE and then click Task Manager.

    b. on the file menu, click new task (run...).

    c. type regedit and then click OK.

    d. in the left pane, look for, and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

    e. in the right pane, double-click Shell.

    f. in the value data box, type Explorer.exe, and then click OK.

    g. in the right pane, double-click Userinit.

    h. in the data value box, type %windir%\system32\userinit.exe and then click OK.

    Note The %windir%\System32 placeholder represents the path of the Windows folder. By default, C:\WINDOWS is the path of the Windows folder.
    If you type an incorrect value in the value data box, you cannot connect to the Windows XP-based computer.

    i. exit the registry editor.

    j. restart the computer.

    Check if this can help you.

  • CLI.exe-application error

    I get a message error every time I start up Windows:

    CLI.exe-application error

    If I click 'OK', he goes, but I want to get rid of the rootcause. The error message is still there on

    the office at startup

    Hello

    ·        Since when are you facing this problem?

    ·        Remember to make changes to the system?

    I suggest you follow the steps mentioned below.

     

    Step 1:

    I suggest you to check in safe mode if you are able to open Windows Explorer without any problem. Follow the steps mentioned below.

    a. restart and keep tapping F8 until you reach the start menu.

    b. Select safe mode from the boot menu and press ENTER.

    c. check if the issue persists.

     

    Step 2:

    Perform a clean boot, and then open windows Explorer and check if the problem still persists. Follow the steps mentioned in the article below.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • cmd.exe application error - application could not start properly (0 x 0000142). Click ok to close the application

    Original title: command line error

    I tried to open the command prompt in the Accessories menu and got a window named "cmd.exe application error". He said "the application could not start properly (0 x 0000142). Click ok to close the application.   Someone has an idea of what to do to fix this?  I am trying to run the file system check.

    Hello

    Did you of recent changes to the computer before the show?

    Method 1: Please check if you are facing the same question when working in safe mode.
    a. restart the computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
    e. when Windows starts, use check and Internet explore if the problem persists.

    Reference:--

    Start your computer in safe mode:
    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Method 2: If you are able to open the same safe mode command prompt, then try to run scan SFC. Please follow the steps in the article.

    The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    For more information how to make SFC / scan, please follow this link:
    http://support.Microsoft.com/kb/929833

Maybe you are looking for

  • Satellite Pro L300 - TEMPO 2.0 rejects serial number

    Hello world I need help. I have a Satellite Pro L300 with Windows Vista Home Basic.A couple of days, I downloaded TEMPO 2.0. But this version rejects to confirm a serial number of the laptop. I don't know that I have insert the number correctly.On th

  • I lost my cd foo HPdeskset 1050 J410 series

    How to get a copy or how dowlow?

  • getFree() return 0

    I'm pretty new to this.  Try to get the amount of memory available with the following code, but the result is 0.  Any ideas?  JDE 4.5,8300 Simulator 4.2 /* * MemMark.java */ // imports import net.rim.device.api.ui.*; import net.rim.device.api.ui.comp

  • IPSec tunnel between 2 routers

    Hello I am trying to configure an IPSec VPN tunnel between 2 routers Cisco, connected to the internet via the ATM interface, my router is a 1841 with the network 10.200.36.0 address the remote router is a Cisco network 192.168.9.0 address with 877. I

  • Too rough Lightroom CC exposure compensation?

    Hello!I wonder if West anyway useful to get the exposure compensation slider to 'Develop' Panel working properly! Now it works in Lightroom CC2015 too "roughly" and its almost unusable so: increase exposure "+ 0.55" blows off highligts and you must c