Blurry text in small characters in Icon editor 2009

Similar Questions

• Place a block of text in small characters outside the margin

  Is there a method by which I could place a block of small text (outside the margin) in all of the main text and every time the body of the text moves, the small text block also moves along with the main text block? I work with the laws of Parliament and along the main text, there are a lot of marginal notes, which must be placed. Unfortunately, I have to put the marginal notes manually and whenever the text of the law is changed, I have to re - align all marginal notes manually. PageMaker has a solution, you know? Thank you.

  lawproject wrote:

  Is there a method by which I could place a block of small text (outside the margin) in all of the main text and every time the body of the text moves, the small text block also moves along with the main text block? I work with the laws of Parliament and along the main text, there are a lot of marginal notes, which must be placed. Unfortunately, I have to put the marginal notes manually and whenever the text of the law is changed, I have to re - align all marginal notes manually. PageMaker has a solution, you know? Thank you.

  I think you can do this in Indesign with a block of anchor text.

  Jay

• Text of the e-mail window and the display shrunk. Cannot read the text in small characters. How to restore the display?

  The E-mail screen suddenly started to shrink and is now so low that it cannot be used.

  Put the zoom level for this area - {Ctrl + 0} < < This is a zero

  https://support.Mozilla.com/en-us/KB/page+zoom

• Why is the text in small fuzzy characters on photoshop?

  Why is the text in small fuzzy characters on photoshop? I am * an ad for a newspaper! and the text is blurry printing and when zoomed in all appear blurry? How can I stop this I only have photoshop and indesign

  the myriad police and the size of the ad is 3.3 "x 5.4" inches! Add looks fine here but then when its print it pixelates

  

• Stor.e TV + menu text too small to read

  Bought a Stor.e + multimedia hard drive, the software is poorly designed icons are larger than the text, it is very difficult to read the text that cannot be changed. The design team should be fired for overlooking the simple aspects of software design. The software must be upgraded and when you have an update made me know

  I have read many reviews on the Stor.e TV but I've ever read on the letters too small.
  The icons are larger than s clear but in my opinion, letters are ok, they are not too large, but also not too small.
  Of course, this is my personal opinion and your opinion is different

  PS; I didn't find the new updates for this device on the European driver Toshiba page.

• Bug in Icon Editor?

  I just changed a VI in LV 2012 yesterday and by modifying its icon.  I came across some behaviors bizarre I would consider a bug.

  I searched the forums and didn't find being mentioned.  I tried using LV 2013 today and had the same behavior.  I have yet to try older versions.

  See the attached VI.

  In icon editor, I made an invisible layer.  I didn't delete it yet, but as I didn't see it while I was creating a new layer on top.

  I hit OK and the icon was saved in the VI.  He appeared just as I wanted in terms of which layers I could see and I turned off.

  I edited the new icon to make a small change and click OK.

  The icon now displays the layer that I turned off!

  I edited again, he is off, press the OK button, and it was as if I wanted to.

  Yet once published and found the visibility has been enabled for all layers when this icon is loaded back in the editor.

  It is certainly unexpected and undesirable behavior.  I expect that the layers that I turned off to stay off when I reopen it icon editor.

  Two VI is attached.  The demo I created in 2013 LV.  And saved to LV8.0 so that it can be tested in older versions.  I know that for a VI and icon created in LV2012 gave me the same unexpected behavior.

  CAR 407147 discussed in this thread has been corrected in LabVIEW 2014.  For a more complete list of bugs fixed in LabVIEW 2014, see 2014 LabVIEW bugfixes. You can download a copy of LabVIEW 2014 evaluation at http://www.ni.com/trylabview/ or if you have a previous version of LabVIEW installed and an active subscription to SSP, you will be able to download the latest version of LabVIEW through NI Update Service.

  Kind regards

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments | Certified LabVIEW Architect

• Partial cure for the problem of model Icon Editor

  I'm driven crazy by models Icon Editor behavior (which I love and use all the time).  What happens is I'll open a project, start to make icons with my set of templates (all saved in LabVIEW Data\Icon Templates\VI\BS icons) and especially if I've included copies of screws that have been developed, say, two years ago and copied from another file on the disk, will notice two copies of the model , with the second copy often in... part \VI\3rd.  Now, these are clearly my models, just saved in the "wrong" place.

  Get rid of these models in doubles was very difficult - I just spent half an hour doing it.  You delete all the files in the 3rd part, open the icon editor and see only one copy, then start doing things and Bingo!, the model appears in the model list in the Icon Editor, but also the file reappears in the 3rd party folder.  What should do?

  So I did a search on the Web, found a fool named "Bob Schor", which has asked about it in 2011 (on this Forum, of all places!), got a few suggestions, but does not solve the problem.  So I tried something else.

  I noticed that there is a lot of. BIN files stored in the model icon folders, with file names that appear to reference different versions of LabVIEW (e.g. Templates.15.0f2.bin).  On a lark, I deleted this file, deleted the folder of 3rd party model, LabVIEW has reopened, reopened the icon editor, and (he said, I hope) the problem seems to be solved.  There is no more 3rd-party file appearing in the model list, icons are not really, it can't be, maybe if I killed the evil Dragon.  I'll let it rest for a week and if it still seems to work, will return and mark this as a 'Solution '.  Comments and other ideas welcome.

  Bob Schor

  Is there a step I missed, but just found.  In the icon editor itself, there is a setting to know where (by default) record the models he finds inside a VI already, but are not in the calibre of icon file.  This setting is under Tools, icon editor properties.  In the 'Model' category, you should disable "Save third icon templates" which, like a default value of \Icon Templates\3rd, part.

  I am currently testing (on several machines, all configured slightly differently), these ideas and so far it seems to work.  I had a small panic today when the '3rd party folder' with additional copies of some of my models began to appear that I opened the existing screws, but turning the switch "Record the icon of third-party models" seemed to solve this problem.  I'm almost ready to mark this (and earlier versions) post as a Solution...

  Bob Schor

• Extremely slow LabVIEW 2010 icon editor

  Working on a project of medium size in LabVIEW 2010.  Out of the blue icon editor is slowing down.  So slow that type in a character of text takes 20 seconds.  After closing, the editor he is about 3 to 5 second rule on everything that I do in LabVIEW.

  LabVIEW games restart things back to normal, until I open the icon editor.  No results of Subvi opening in this problem.  And this happens in any project or even if no project is open, and I'm trying to change the icon in a Subvi Untitled 1.

  Anyone else seen this behavior.  I really want to re - install LabVIEW 2010.

  Thank you

  I've not seen this behavior, and I really have no idea what could be the problem. As a solution, we can 'turn off' icon editor and force LabVIEW to use the old classic that is causing the problem to go, in my opinion. To do this, rename the following lv_icon.bak:

  [2010]\resource\plugins\lv_icon.vi LabVIEW

  This will completely ignore the code from the editor of icon and go directly to the editor of classic icons. You will lose a lot of the new functionality of the icon editor, but I'm guessing that this will make the downturn go away.

• How I can solve the problem with blurry text in Fireworks.

  Hello

  
  

  I built a site currently and I use Fireworks for my designs, I have is with the text, all look fuzzy or blurry text in the browser, I tried everything but no result. Please help me with this.

  
  

  There is here an example:

  

  For the small text that you have, you would be better using HTML/CSS.

  However... What I often do with text is to make an image of 2 or 4 times more large as I want (with a font size of 2 or 4 times larger), a version flattened export, then lower version flattened 50% or 25%, properly.

• Blurry text after adding a keyframe to css

  After you have added a text key frame tent, all text on the page in view is hazy on the loading of the page but brightened after the scroll of the framing out of sight area & is ok even return the marquee again in sight. I see the same thing on the tables, but once again the page to scroll it lightens. Do not see this problem with chrome. Obviously, the marquee affects Firefox text rendering but is there a solution for this?

  OK, the fact of the background scrolling solves the problem of blurry text. I can live with, but prefer a fixed background, almost all sites today fixed it, everything seems better as it so hoping that firefox will look to find how it can take into account the mode & keep solid text. That solved this issue, but not the problem. thx for the feedback.

• How can I fix blurry text in Firefox 28?

  With 8.1 Windows and Firefox 27 I have set the blurry text by setting the pref gfx.content.azure.enabled false [...] on the subject: config. But this line is now missing in config. What is the fix now?

  See the 414 comment in bug 812695:

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=812695#C414

  Try this pref rather (topic: config-> right click: new > Boolean):

  • Layout.paint_rects_separately = true

• 32BV500B - blurry text using the HDMI and PC connection

  Hello

  I currently use the 32BV500B as HDMI PC monitor.
  I would rename the entry 'PC' to allow the TV HDMI mode "pc" to correct a blurred text.
  I don't see any option to do this, use the menu system.

  Otherwise, how can I turn on the TV in the mode "PC"?

  I can confirm that I tried different HDMI cables and the blurry text only occurs via HDMI on 2 different computers.

  Thank you.

  Hello

  It seems that the HDMI connection can be switched in PC mode.
  PC mode is available only for the VGA input.

  Please take a look at page 28
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/BV500-32-English-specific.PDF

  For switching source PC, press the "SOURCE" on your remote and select the PC input. You can also use the Source menu to switch to PC mode.
  Note that PC mode menu settings are only available when the TV is in the source PC.

  But if you have connected the PC to the HDMI port and the image is not clear enough, I recommend you to change the level of sharpness in the image menu.

• LabVIEW2009: How to replace the new Icon Editor with old?

  Ladies and gentlemen,

  I really don't like the new icon introduced in LabVIEW 2009 Editor:

  It was tried to "Photoshop shipped" with a lot of features:

  

  But I don't like it really, because:

  -It has opened EVERY time on the RIGHT monitor (I have three monitors and main monitor in the middle)

  -It takes a lot of time to launch (former editor of icon start momentally)

  d ' usability point of view - it was wrong to place tools on the right side. Often, they are on the left side (and only in the old icons, but also in imageprocessing Editor software like Adobe Photoshop). Also front of interface design user Panel... hmmm... This can be better...

  -some bugs or modified features (for example - KING to select, then press the button - nothing happened)

  etc...

  Is it possible to replace it with an old man:

  

  Ideal solution will be - switch just between two editors (some features introduced are not so bad).

  Thanks in advance,

  Andrey.

  Go to \Resource\Plugins and rename lv_icon.vi. It is a plugin that is called when you call icon editor, and if it isn't there, LV is the Editor (at least for now. I don't know how many versions to come, they will keep the code).

  Note that the editor is open source, so you can enter and change what you want (or save you time and use the changes others did, as the thread of PJM here. You can also watch other discussions in this group).

• LV 2009 Icon Editor turned to the previous Version

  Hello!

  I want to ask you if someone has experience strange behavior of "ICON EDITOR". When I opened my editor-in-Chief, it showed up about a half second or so away and violllllla! the former editor-in-Chief came. Really strange because I just used it earlier today... If anyone knows how to bring it back please please post the "how-to".

  Thanks in advance!

  Check the LabVIEW data folder in 'My Documents'. If it is set to read-only, icon editor does not work.

  Usually, it's a sign for him, when the editor of icons appears for a brief moment.

  IE is open source. If the LabVIEW data folder is not write protected, go to lv_icon.vi of 2009\resource\plugins\ of LabVIEW and check if IE is executable at all.

  Thank you

  Tom

• Polymorphic icon editor - returns to the old editor

  LabVIEW 2010 SP1

  I have a set of polymorphic screws I have in a library of Instrument project into the Public folder.

  When I try to change the icon, then select a glyph to slide in the LabVIEW icon field returns to the old editor!

  It's really slow my productivity.  Is there a way to fix this?

  This also happens to the non-polymorphic screw Icon Editor.

  Close LabVIEW and begins again deleted the question - even if I can't always change the option of read-only folder.