Bo off the power when save you in Keynote 7

Similar Questions

• E320 unexpectedly powers off the power when change you position!

  Hey guys,.
  Is not my ThinkPad Edge E320 but a few months old, but I've noticed a problem with it. I would like to know if others are facing similar problems and if there is no solution for it.

  The laptop shuts off completely when I move. But I noticed that it doesn't happen if I'm REALLY careful with it and move it into both sides.

  It seems to be a 'soft spot' on the underside of the laptop that forced him to cut immediately when it is pressed. And move the laptop holding down causes exactly that.

  Is anyone else facing such a question? It would be great if someone could help me with this.
  E320 no users, if you have an idea about what is happening and that you may know a solution, please do not hesitate to post on this.

  Thank you everyone.

  I found a solution that seems a permanent solution to this problem.

  Download the two photos FYI
  http://S21.postimg.org/mxsbtwrmv/PHOTO2.jpg
  http://S21.postimg.org/fgnpsfrhj/Photo6.jpg

  I bought the E320 for a year. Never had a problem during my study of honours. That from last week, when moving the laptop, the machine stopped immediately offshore. After some troubleshooting (plug battery and AC power), I noticed that the problem occur only when you press and hold the bottom of the left upper keyboard with pressure.

  Google this question, found a large amount of complaints from the forum of Lenovo and bath tub. Thanks to the entrance of ThunderDuck whirlpool. I just put a thick paper (I chose the photo paper) underneath the SSD (metallic surface caused the short circuit, I guess) and the problem has been corrected.

• End of Cup Video Clip off the power when send you first Pro CC 2014 to effects after 2014 CC and I slowed down with Timewarp?

  When I send a clip from Premiere Pro CC 2014 to after effects CC 2014 and I slowed down with Time warp the clip cut of 75% at the end of the video and display only the first 25% slow.  How can I fix this and how I round it travels in first pro to play the FULL slow motion video clip?

  Try adding effect temporal Deformation on an adjustment layer in AFX, rather than on the video it self.

• Is there a need or a way to turn the pencil off the power when you do not use?

  Is there a need or a way to turn the pencil off the power when you do not use?

  Unfortunately not. The best thing is to turn off bluetooth. However, you will need to re - pair the iPad and the pencil again by plugging in the port of lightning. When not used the pencil of apple do not lose a lot of power.

• Satellite M30X powers off the power when you touch the USB port

  Hello everyone, just registered and it is the first problem:
  As there is no general hardware forum, I post my problem here.

  I got it twice, my laptop
  (Product: Satellite M30X, Version: PSA72E - 008010GR) just went completely off.

  Motherboard:

  NorthBridge: Intel i855GME
  SouthBridge: (ICH4-M) of 82801DBM LPC Interface Bridge
  Motherboard model: Toshiba EAL20

  USB:

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI controller #1-3
  Version: 1.0
  Interface: UHCI
  Frequency: 48 MHz

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI controller
  Version: 2.0
  Interface: EHCI

  I have the latest Intel Chipset drivers installed and Windows XP Home SP3 with all updates.

  Once when I hit just the back USB ports with a USB plug, the other time when I unplugged my bluetooth key (climbing din't remove it).
  There was no blue screen or message of any kind, not even in the registry after you start the system again or this fatal system error box when you start after a system error.

  Just a total failure. But it works fine the rest of the time. I also tried to remake the script, but it didn't work.
  I have cleaned with a vacuum cleaner to remove dust and has taken a good look, but saw no difference to the side track.
  Maybe the clamps of the wand to shield a little more out to the contact pins on the rear.

  What bothers me a bit, it's some time ago, I had the laptop one computer my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.
  Still works well. Now for me, that I broke the USB port Insider somehing.
  I could not determine also the loose parts or unfirm at all.

  Y at - it there, diagnostic software that measures the motto of the port or power problems?
  I have a multimeter, fetch short-circuits with it?

  I saw a package of drivers Intel for USB 2.0 over there, but I can't find it on their page, advice?

  Thank you very much for your help, I just wanted to update my RAM and now I am not so shure if my laptop will last the next week.

  Fabian

  Hello

  I put t know any diagnostic software that could analyze this question, I think that a technician of the ASP may be able to provide exactly this question results

  > What bothers me a little is that some time ago, I had the laptop and my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.

  I think this might be the reason why the laptop stopped while you touch the USB port eventually ports were damaged by using the memory stick, this could cause the laptop off

  However, what we can do is to provide some suggestions and assumptions
  It you want to know why this is happening exactly, then you need to contact a technician laptop for a control.

• Saving ink by powering off the power when you are not using it?

  I have a HP Officjet 6700 running under Windows 7 64-bit and read that turning off your printer when you don't use to save on ink. Is this true?

  Hello

  Right, but turn off will save a bit of power. Inkjet printers need ink more when you turn very often.

  I hope this helps.

• Tecra S2 began to turn off the power when you run some heavy applications

  I have laptop Tecra S2 and (almost 3 years) had no problem so far.

  Recently, it started to turn off instantly when you run some heavy duty applications, such as games. He takes turns instantly and can work hours if it's just a spreadsheet or just Web broswing documents but when I start a game it takes 15-20 minutes.

  Once I started it even once, it takes less time to get the same result.

  My guess is overheating - any ideas how to fix?
  Or it may be something different?

  See you soon

  Hello

  There is nothing to fix. The laptop needs to be cleaned. It must be done on the professional track. This means that the laptop must be disassembled as just at the moment when the cover is removed the cooling fan and the cooling rack can be cleaned properly.

  After having this laptop will work like new.

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• Satellite 2435 powers off the power when you try to install the recovery CD of OS

  Happy new year

  Satellite 2435 powers off accidentally when trying to install the operating system from disk with Windows XP Pro startup disk or recovery.

  When starting and working with Winternals AdminPak 5.0, Portable Edition Windows or Dos 6.22 it works stable.
  When booting with the disk recovery he died each time in a different position - when partition formatting, copying the files, etc..

  Hardware problems, isn't? And is it possible to determine and solve the problem at home (because we now hoildays, services does not work)?

  Thank you in advance.

  (Sorry I don't speak English very well)

  When I had my old computer I encountered similar problems in Windows XP and the Windows XP installation. There is a WinXP option to disable the auto-restarting after a problem, instead of restarting, a blue screen stating that the problem appeared. I lived during the installation of WinXP blue screens every time at various times as you and your power off, he appeared on the different WinXP CD (without SP, SP2 with nlite, etc.).

  Maybe your "power off" is hidden blue screen too, but I'm not sure. If this is the case, it may be a hardware problem, so you should test your RAM, your drive hard, etc., for example using memtest for your RAM and the built-in WinXP 'chkdsk '.

  It's probably hardware problems. Were you ever able to correctly use the disk without problem in the past, or is this the first time you try to use the recovery disk?

• laptop computer closed off the power when you unplug

  Original title: laptop turns off

  I just replaced my battery because my only original suggested I do. Now, when I unplug my laptop with the new battery in, my computer turns off. I checked the BIOS system set in place and my adapter shows she is good, fully charged battery display and works normally. Why did the computer turn off?

  Hello

  What is the number and the model of the computer?

  It is made from material that I would say you to the manufacturer of the contact system to solve the problem.

• Mouse not removed and Trun off the power when you watchig film

  
  

  I found the solution... just open up laptop and change the slick carpet mouse that's all

• UltraBay HDD off the power when idle

  I have three drives: WSSD, HDD, HDD into the ultrabay slot. I think this takes its toll on my battery. My first HARD drive is often used because it has my files "Downloads\Firefox & uTorrent". However, my second HDD has only music. Is it possible she's automatically power off when I'm not playing the music of this drive?

  Thank you

  Shane.

  Which OS are you sporting? If WindowsXP or Windows7, install Lenovo Power Manager and configure your desired 'spin-down' for your HDD Ultrabay times. If you are athletic Windows8, LPM is not available (although some people reported that they were able to install in compatibility mode 'Windows7' LPM), open the Control Panel, power (IIRC) and configure your desired 'spin-down' for your HDD Ultrabay times.

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

  Hello

  Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

  I have a Toshiba Satellite Pro L670.

  Even when the sound in Windows is turned off the laptop do a annoying sound.

  Thank you!

  Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

  Do you really want to work until the battery is completely discharged?

  Anyway, AFAIK this notification level BIOS cannot be disabled.
  Let's see if someone else is better informed than me.

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.