Boat owner error on files

I just installed a new copy of Mac OS Sierra and am not able to make changes on the data saved on my drive another partition. so, how can I sent the permissions on the data of the disk or the disk so that it can perform all types of changes to each file.

See if you can do the following. It applies to the Sierra too.

OS X Yosemite: If you do not have permission to use files on a disc

If you do not have the option ignore property, then simply change the share permissions and permissions

Tags: Mac

Similar Questions

  • error message "you don't have permission to open this file. Contact the file owner or administrator to get permission. " I am the administrator and the owner of the file.

    My XP computer crashed and now I have Windows 7 on a new PC.  I downloaded my files from an online backup and now when I try and open a Word document, for example, I get the error message "you don't have permission to open this file.  Contact the file owner or administrator to get permission. "  I am the administrator and the owner of the file. Help!  I am locked out of all my files!

    1. Right click on the folder that you want to take control and then click Properties.

    2. Click the Security tab, click Advanced, and then click the owner tab.

    3. Click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    4. Click on the name of the person you want to give to the property.

    5. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

    6. Click OK.

  • Any attempt to create results by "Access denied" error zip file

    Windows 7 Professional 64 bit.  I am logged in as administrator.  UAC is not active on this machine.

    Any attempt to create a zip file results in a dialog box stating "unable to complete the operation.  Access is denied. "
    If I select a file or group of files/folders, do a right click and say 'Send to Zip', I get this error.  Interestingly, while the error dialog box is still open, the zip file will be displayed in the current folder.  Clicking OK in the box dialog error cancels the dialog box and deletes the zip file.
    This seems to be some sort of permissions thing.  Can I create a zipfile by clicking right in the Explorer window by clicking on "new", then "compressed (zipped) folder", and it will create the file very well.  I can even give it a name.  Any attempt to copy anything in this new zip file generates an error "file not found or no read permission.  Try to delete the zip file says 'you need permission from administrators to make changes to this file.
    So now, I open the properties for the zip file and go to the Security tab.  It was there that I discovered that this file has no owner are entrusted to him.  I can then change owners, add my name as the owner of the file, assign full control to myself, apply the changes, and now the zip file can be read/written/removed normally.
    So whenever I need to create a zip file, I have to go through the steps of creating-> change the properties of the-> Assign owner-> Apply-> add files to the Zip file.  It's a royal pain in the keester.
    My question is: what changes to do to confide as the owner by default when a zip file is created?  This seems to happen with only zip files, any other type of file gives me this problem.  What happened since I got this computer brand new with Windows 7 64 - bit on it.  I can't say that it is a "Virgin" installation, he was photographed by a group of COMPUTER companies (I work for a fairly large company).  This group is a clue what happens and apparently others in our society do not report this problem.

    Solved! The problem is with the permissions on the 'TEMP' directory which is used during the process of zip. See this announcement and scroll down to "more useful answer.

  • When I connect I get the 404 not found error message file

    Original title: 404 File not found

    I was the connection of a webcam that allows me to observe a bird's nest.  I went there

    several times a day for about 6 weeks.  When I log in now, I get the 404 not found error message file.

    I returned to view history and tried to bring it up like that without success.  All other programs seem to

    to work properly, no recent changes I know.  The eggs should be hatching, and I can't wait to

    Download this issue is resolved.  Any ideas?

    Perhaps that the eggs have hatched and the webcam has been removed.

    The problem is not just about anything on your computer.  You have to ask the person who is the owner of the webcam.

    The 404 or not found error message is an HTTP standard response

    Code indicating that the client was able to communicate with a given

    Server, but the server did not find what was requested.

    The web site hosting server usually generates a "404 Not Found"

    Web page when a user tries to follow a link broken or dead; That's why

    the 404 error is one of the most recognizable errors on the

    The World Wide Web.

  • Update iTunes to 12.5.1 - "error getting file security: C:\ProgramData\Apple Computer\iTunes\ GetLastError: 5.

    Having now this error pop up everytime I go to install the latest version of iTunes. I tried to do an uninstall on iTunes and received the same error message.

    I'll post here the error in the reference summary:

    "Error getting file security: C:\ProgramData\Apple Computer\iTunes\ GetLastError: 5.

    I have also tried to do a repair on iTunes as well and have received this error message:

    «An error occurred while attempting to create the directory: C:\ProgramData\Apple Computer\iTunes\SC Info»

    I am currently under the latest version of Windows 10 and the version of iTunes, I have installed right now are 12.4.2.4.

    Right now, I'm still able to access iTunes for my music and the storefront. I'm not able to upgrade to the latest version.

    same here, but I have iTunes on my iMac that I just received 16 January... will update not to 12.5.1... stuck on 12.4.3 since IOS update on iPhones and iPads... but I can still use iTunes... go figure...

  • error: unknown file system

    Hello users of HP, I use ProBook 4530 s. Last year, I installed Microsoft Professional Home 64 bit. Yesterday, I delete the partition from my linux system and after that I get the following error;

    error: unknown file system.

    Enter rescue mode...

    grub rescue >

    I also followed the steps for recovery, but failed. How? I put the DVD in the window and the restart, after the initial stages, the screen on the install, I click on 'Recovery Option '. I received the message that the I have Window 7 is installed. After you click Next, it is said that the resovery window option is not compatible with the window. What to do in this case. I have install this window in my country, now I am in China, where every product of the window is in Chinese. Secondly, I have a lot more data research everything I hope you not own format in all cases. Please help me if possible guys.

    Best looks ahead

    as it happened after that you deleted linux I suggest to download an iso of ubuntu and start to see it if you anywhere

  • Get the 5 error: the file is open

    I'm having a problem with my VI. I want to create a file every minute and write at a high resolution for this minute. Then after the minute is made and im writing to another file, delete the file I wrote it just to. I can create files very well, but when it's time to delete a file, it gives me "error 5: file is open ' I read that there is a refernce open and that's why it does not work, but from what I can tell, Im closing all references.

    I have a Win 7 computer, using the C - DAQ to acquire data, and everything works fine except the Remove feature. I have attached my vi for you to look at and would appreciate any help in this matter.

    Thank you


  • Executable cannot find the custom error code file

    I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

    When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

    When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

    It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

    There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

    LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
    =========================
    NOR-488: Command requires GPIB controller charge controller.

    So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

    List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

    Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

  • 13 error on file of the list in temp.vi.

    The attachment contains a program to copy a file from 1 folder and paste it into another folder. But when I try to run the code it shows an error.

    13 error on file of the list in temp.vi.

    Possible reasons:

    LabVIEW: The file is not a resource file.

    C:\Users\MadhavaG\Desktop\Govind\An automated test set-up for dynamic characterization of the IGBT.pdf

    Can someone help me as to why the error occurs and how to overcome the error. Thanking you.


  • I have problem with a .iso file that when I want to use I face the error "the file name is too long.

    Original title: name of a file

    Hello

    I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

    I don't know how fix it.how I rename the file iso, shorter that I can use?

    Please help me.

    Thank you.

    Right-click on the ISO > rename > give a short name

  • TDMS file spiltting - error-201302 file permission

    Hello

    I'm trying to implement tdms logging as it automatically splits files tdms in predefined using the DAQmx Read Logging.SampsPerFile property file sizes, however I get permission for the error-301302 file error.

    Anyone can shed light on the cause?

    I also tried also put in Logging.FileWriteSize with the same results.

    Helen

    It seems to me that you can not use with simulated DAQ hardware - even tried code on a system that does not have the equipped DAQ card and everything is good.

    Helen

  • How to restore the documents now say "error reading file"?

    I have a certain recorded documents I can't view... They are still there, but when I try to view them I always get the message "error reading file" many of them are imprtant to me and Iunfortunately cannot replace them. Even when I find out my back up, I still cannot get them.

    Help!

    Hello

    1. what documents do you speak?

    2. were you able to view these files before?

    3. don't you make recent changes?

    I suggest you try to restore the computer to an earlier point and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

    It will be useful.

  • SP 3 installation error message: "file not found and the installation is stopped.

    Original title: Setup servicepack3 error

    received message error servicepack3 file installation will be locater and installation is stopped

    Hello

    1. you try to install Windows XP service pack 3?
    2 are you able to install other updates?

    I ask you to download and manually install the Service Pack for Windows XP. See the link in the article below to download the pack.
    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717/

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot transfer files to an external hard drive to a second and the error is "error copying file or folder. "Impossible to copy ' file/folder name.

    Original title: cannot transfer files to one external hard drive to another

    An error message is displayed: "error copying file or folder." Impossible to copy "file/folder name. "The destination folder is the same as the source folder.

    Peter Tiedemann

    Hi Peter,

    Thanks for posting your question in the Microsoft Community.

    From your problem description, I understand that you are unable to transfer files from an external drive on another drive. Please let me know if this isn't the problem that you are experiencing.

    Before troubleshooting, I have little information on the issue.

    1. Do you receive any error or display message?
    2. Did you recent hardware or modifications to the software on the computer before this problem?

    Try the methods and then check after each method:

    Method 1: Transfer files from a drive to the location on the desktop or a temporary folder and then try to transfer them to the destination disk.

    Note: make sure the free space on the disk in the destination drive.

    Method 2: Run the Fixit:

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/

    Method 3: Disconnect your player safely, and restart the computer. And then try to transfer the files.

    If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

    It will be useful.

  • Error message - FILE OPEN ERROR 5

    Get a box -' file error open 5 "once I click it, it comes at the time when I try ot open a file, but it does'nt seem to touch anything. Anyonee know what it is and how to fix it?

    Hi dangilorma,

    Thanks for posting in the Microsoft Community.

    I understand that you are facing the question with the error message - FILE OPEN ERROR 5

    Before you start the troubleshooting steps, I need the information required.

    Did you change to the computer?

    Method 1:

    I suggest you perform the clean boot and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click restart to restart the computer.

    Method 2:

    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

Maybe you are looking for

  • I can't click on some options, like exit buttons button music/pauzé to youtube or any option to any site.

    If I want to listen to a song on Youtube once again, I have to use F5. I can't click on options on the site. As pauzé / volume change. Also, I can't click on the exit button. Nothing happens.

  • SPDY enabled in FF 12.0 prevents the loading of Gmail

    If I activate SPDY to 12.0 FF I can't connect to Gmail. The connection try but just hold with connection on the tab indicator slowly turning counterclockwise. I can connect to Gmail with Chrome, which I believe has SPDY-enabled by default.

  • The battery life seems short

    Hello. How long the battery is supposed to last when he came on but idle? Only things that should happen is the assessment of 15 minutes of e-mail on wifi - do not think I have anything else running. My Xoom was discharged after only 6 hours, when he

  • Driver installation problem

    I complete recently restored on my pad idea. However, my computer decided not to keep all the drivers. So I decided to reinstall. I could not use USB because I needded a pilot so I used a cd. I installed usb internet lan, power management, graphics I

  • ENVY15 beats edition Dr. rubber feet

    Among the four rubber feet have carried out of the machine, I tried to look through the surfer of the part, but I could not find a set of rubber feet. can someone guide me in the right direction to get these parts. Thank you