BOM of MyRIO Starter kit, Kit and Kit car Mechatronics

Similar Questions

• Philips dyed white Starter Kit found that it cracked so I want to just return item

  Philips dyed white Starter Kit A19 E26 who ordered 2 days ago and happened

  I found that it was cracked so I want to just go back to the item, but is not able to return (it is not printed about to return)

  This point is not on my shopping list wasn't error in the homepage?

  just find a way to return this article... Please write me.

  < re-titled by host >

  These are bulbs?

  You posted on Apple (computers and iDevices) forum for the publication of books. We are a user to forums for computer and iDevice problems.

  We cannot help you return the bulbs.

  Please let us know if I misunderstood your problem.

• Unable to connect to starter kit 2.0 Robotics

  Hi all

  I know this question has been askedmultiple times, and I read trough forum messages, but cannot find a solution.

  When I try to run a robotics project on DaNI, 2.0 Starter kit, I get a message of conflict resolution, saying "unable to connect to the target. --> See image rasthaus

  I installed the latest version of labview, robotics, FPGA modules and in real time as well as pilots of RIO.

  Once I disabled my firewall, I was able to detect the robot with MAX, but I was not even able to connect using labview.

  Thanks for any help,

  MortZxD

  Hello

  I had the same IP address as illustrated by MAX in my library of projects, but I could not always connect.

  I reset the IP address of the robot to start in safe mode and changing an address IP static, dynamic and who did the tour!

  Thnks

• Robotics 1.0 Starter Kit

  Hello

  I have Robotics starter kit 1.0 and Labview 2012. I would use custimizing FPGA, which does not directly use the starter kit of screws. I haven´t have been able to find an example of this for the starter kit 1.0 and I don't ' want to start from scratch.

  To clarify my question, I would like to work in an environment similar to the one on the left, instead of one that is indicated on the right but for the starter kit 1.0

  

  So my question is, where can find an example of the itinerant program for the starter kit 1.0, with an FPGA vi?

  Thank you

  Juan

  JFXod,

  Certainly, as it is said "jordankuehn", what you see on the left of the image is a project, which added a FPGA target (right-click on the chassis > New > target FPGA), which allows to work in FPGA environment and not mode SCAN Engine (illustration right). Now unfortunately the 2012 version of LabVIEW and LabVIEW Robotics Module 2012 does NOT include an example to customize the work with the Starter Kit 1.0, unlike an example of work with the Starter Kit 2.0.

  You could do the following: the version of LabVIEW 2010, if it had an example in order to customize the features of the Starter Kit 1.0, then you can install the 2010 version of LabVIEW and LabVIEW Robotics and get this example. Or you can see the attachment that is an example, I used to work with the Starter Kit 1.0 in 2012 of LabVIEW.

• Starter Kits

  Hello

  This is Harish Chincholi, first thank you for giving me the previous answers to my questions, I checked with PCI - CAN cards... because the cost was a big problem... and my direction does not allow me to go for that price... so I would like to demonstrate CAN characteristics and its importance using CAN starter kits, if you could help me with this then my management must be impressed to go for cards CAN...

  Thank you best regards &,.

  Harish Chincholi

  Hello Mr. Harish Chincholi.

  This is Pavan Ramesh form or the India. If you can let me know what exactly you are looking for, I would be able to help you the best. Please let us know what is the application that you plan to build with CAN for the purpose of the demonstration.

  Kind regards
  Pavan

• VI FPGA is broken in example Robotics Starter Kit is copied.

  I use LV 2010 and I play with the example of 'Roaming' Robotics Starter Kit. When I open the Starter Kit project directly from the Finder "example" and look at the FPGA code, everything is fine. However, when I do my own copy of the project (by performing a save under, select duplicate .lvproj and content), there is a problem with the FPGA code. If I open 'Starter Kit FPGA VI.vi' I get a broken arrow. Some FPGA IO references seem to not completely defined. Screenshot see attachment. I also note that the reference to the wick of FPGA (in Roaming.vi) always points to the original location of the bitfile in LabVIEW 2010/examples, rather than follow the new copy of the project. Can someone tell me why this is happening and how to fix it so that I can edit / rebuild the FPGA image. Note: I also installed LV2009, and I'm sure that I was able to do this in the past.

  Problem solved... sort of.

  Don't know why save it under did not work, but it seems that the 'Correct' to get a working copy of the Starter Kit "Mount" app is to use the new option 'Project Probotics' of the screen to start LV.

  This is made most obvious from the portal "LabVIEW 2010 Robotics", but it is also available from the portal "LabVIEW 2010"standard if you dig into the choice of 'New project'.

  PS: 'Portal' is probably not the right word, but I don't know what to call different 'flavors' of LabVIEW.

  Phil.

• HFM sustainability reporting starter kit user's guide

  Hello

  I want documents related to the hfm sustainable reports starter kit. Please could you tell me how to download the implementation Guide (SRSK_ImplementationGuide_1.0.0.pdf) and the Admin / (SRSK_AdminUserGuide_1.0.0.pdf) user's Guide.

  Thank you

  Michel K

  I received the documents of the Doc ID 1370784.1 with the help of Oracle support team.

  Thank you

  Michel K

• 'Multiplication' of the Labview Robotics Starter Kit?

  Hello! Im working on the odometry for my Starter Kit (model 4 wheels) based on the book "where I am? -You can download the book for free here: http://www-personal.umich.edu/~johannb/position.htm page 20 this theory says that the factor which translates as the number of pulses to linear distance is: Cm = D: PI * D /(n*Ce) diameter of the wheel (mm) = 4 "= 0,1016 mm n = gear ratio =? This linear encoder resolution (PPR) = 400 PPR so = distance = Cm * N_pulses Im not sure how I could calculate the gear ratio of the LR Starter Kit, taking into account that there are 4 speeds interconected for each pair of wheels. I found in a document from the COMPENSATION Commission that the ratio of the Starter Kit is 83:1, but if I try n = 83 distances Don t make any sense! -UNIC course laboratory 2 (PDF, 1 page assignment): "" "gear ratio: it's the amount of turns, it takes the engine to fill per 1 rotation of the wheel.» The ratio of the daNI robotic platform is about 83:1. (This value takes the engine reduction account) "" "" If anyone has the gear ratio calculated beforehand, or can give me some guidance on how to calculate it (or tell me if Im doing anything worng with units!), could you help me, please?

  Mosadioluwa,

  I do not know whence the value of 83:1, but I can tell you that the wheels of Starter Kit 1.0 have a gear ratio of exactly 2 Motors per wheel turn.  The engine is mounted on a wheel of 40 teeth, which meshes with the 80 teeth gears that are mounted on wheels.  This means that the ratio is 2:1.  Note that the Starter Kit 2.0 has a 1:1 ratio.

  Chris M

• [HEART] [JSK - Jump Start Kit]

  Hello

  Available versions of JSK Jump Start Kit?

  Any idea or a link?

  Thks.

  Yes, there is:

  ORACLE WEBCENTER 11 GR SITES 1 material JUMPSTARTKIT - Patch 14060594 (that's 11.1.1.6.0 Sites)

  ORACLE WEBCENTER 11 GR SITES 1 material BP1 JUMPSTARTKIT - Patch 14841811 (that's 11.1.1.6.1 Sites)

  Kind regards

  Stephan.

• Kit car hands free blackBerry Smartphones

  I just bought the 8330 Verizon.  Initially, I learned that it would recognize the Motorola car kit I had for my Razr 3vc... of course, it doesn't.

  However, I love my purchase and plan to keep it.  However, Iowa is soon to have no a cell phone bill in the legislature and will most likely spend.  They have no real handsfree unit other than this thing, I put in my ear... bluetooth.

  Are there books around or any kit car there for the Blackberry 8330 or will there?     So, I liked having just push a button and have the handsfree to answer the phone or to make a call with voice activation.

  I thank you for the information and did get comfort cradle bt... must have an installer to do, but I think that I have someone to do it, and much she ordered a helmet and lead to its charging cradle that connects to the computer.

  It all started when I got my 64 bit Vista machine and my PALM didn't work with it.  Love anyway, the new unit if you can love the thing.

  Once again, thank you for the information.    I get up there and sometimes I start to wonder.  I have 61, teach algebra and begin to question what seems logical...

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Does not start, need more and more memory, then crashes. It is SOLVED by deleting DB, panacea.dat, foldertree.json CAUSE global messages: uknown

  As a user of Thunderbird long term (currently version 38.2.0 on Win7 x 86 US) today, I caught myself (negatively) by the following problem: at the launch at the start of Thunderbird, the window will appear last closed (and for a short while, I see my files, etc., as left behind, during the last closure of Thunderbird), but then it turns into State "Not responding" (nothing works). When we look in the Task Manager, I see that Thunderbird seizes more and more memory, before this date - after a few seconds - crashing. I really hope that for some help fast, if possible (I desperately need a solution for e-mail job well - ideally the one I had, i.e. Thunderbird with my settings).

  What I tried:
  -Uninstall Thunderbird and install it again (did not help)
  -Uninstall Thunderbird and install an older version (I tried 38.1.0, 38.0.2, and 31.8.0 - nothing has worked)
  -from Thunderbird in SafeMode (same problem)
  -from Thunderbird in safe mode of Windows (same problem)
  -from Thunderbird in offline mode (did not help)

  My main question to know how to solve this problem, includes questions such as
  ? Should I try to delete some files of Thunderbird and try again (which ones?)?
  ? Can I use a command line "tricks" to get Thunderbird started?
  Etc.

  Thanks for your help!

  I think I solved my problem: delete messages from global reach DB and panacea.dat foldertree.json helped - once Thunderbird started again interactively and now I can restore my data files/messages.

• When Windows starts, it starts also Mozilla and an adf.ly page appears.

  I myself Adf.ly Skipper, but firefox always starts with windows and ot adf.ly it load Google.com. All - tried reset firefox, anti-virus, backup even my computer. I'm never mozilla start with windows or install adf.ly or anything... What can I do else? Help!

  If you change your browser by default for Internet Explorer, the page opens in Internet Explorer the next time? This would be the common model for external pages, they are targeted on the default browser.

  Microsoft has a utility named autoruns, you can use to see what is configured to run at startup (opening session): https://technet.microsoft.com/en-us/s.../bb963902.aspx. I hope that this will help in tracking it.

• Portege M200 - Toshiba start screen appears and then nothing

  My Portege M200 does not start.

  Turn it on and toshiba start screen appears and remains like that. Nothing works (or F2 to enter the BIOS)

  Any ideas?

  Hey,.

  To me, it looks like hat it is a certain hardware for computers problem stops at the screen of the Toshiba BIOS...

  It's really hard to say what could be the reason

  First of all, you must follow the instructions in this article and maybe it helps:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• My 27 "IMac just started running slow and has a hard time, opening of Yahoo and other sites

  My IMac 27 "just started running slow and is struggling to open Yahoo and a few other Web sites. I bought it last August, but he has only started to slow market over the last two weeks. I have reset the pram, restarted with Cmd - R. I restarted in safe mode and as a guest and it still runs slowly. I have used Etrecheck, the only suspect think I wonder on "3.10 GB com.apple.WebKit.WebContent (5). What is webkit?

  last week I installed 2 Apple airpot extreme and hard wired two airports and my mac, my wifi I and the entire system is running 5, speed, download upload, and ping 11ms. 8mbps 5.9mbps I uninstalled Silverlight, Lightroom and most of the apps I use, but I can't figure out the problem.  Any ideas on what I can do to get my mac back to the current? I'm about to take my mac at the Apple store because she is still under warranty.

  Kind regards

  Rick

  
  

  Top of page process of memory: ⓘ

  3.10 GB com.apple.WebKit.WebContent (5)

  698 MB kernel_task

  Softwareupdated 475 MB

  254 MB Solitaire

  180 MB Safari

  EtreCheck version: 2.9.1 (251)

  Report generated 2016-02-03 22:56:23

  Download EtreCheck from http://etrecheck.com

  Time 01:18

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Hardware Information: ⓘ

  iMac (27 inch, at the end of 2013)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac14, 2

  1 3.2 GHz Intel Core i5 CPU: 4 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: unknown

  Video information: ⓘ

  NVIDIA GeForce GT M 755 - VRAM: 1024 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 2 days

  Disc information: ⓘ

  ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 999,01 go-go (942,10 free)

  Storage of carrots: disk0s2 999.35 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Application Support/org.pqrs/Karabiner

  [loading] org.pqrs.driver.Karabiner (10.15.0 - 10.11 SDK) [Support]

  Launch system officers: ⓘ

  [loading] 157 tasks Apple

  [operation] 79 tasks Apple

  Launch system demons: ⓘ

  [loading] 191 tasks Apple

  [operation] 96 tasks Apple

  Launch demons: ⓘ

  [loading] org.pqrs.Karabiner.load.plist [Support]

  [loading]    A spot of Apple

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Carabiner application (/ Applications/Karabiner.app)

  Other applications: ⓘ

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.Solitaire

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000007.Karabiner_AXNotifier

  [ongoing] com.etresoft.EtreCheck.115232

  [ongoing] org.pqrs.Karabiner.73632

  Plug-ins Internet: ⓘ

  Default browser: Version: 601 - SDK 10.11

  QuickTime Plugin: Version: 7.7.3

  Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  4% WindowServer

  3% fontd

  0% kernel_task

  0% dock

  0% cloudpaird

  Top of page process of memory: ⓘ

  3.10 GB com.apple.WebKit.WebContent (5)

  698 MB kernel_task

  Softwareupdated 475 MB

  254 MB Solitaire

  180 MB Safari

  Virtual memory information: ⓘ

  86 MB of free RAM

  7.91 used GB RAM (1.03 GB being cached)

  10 MB of Swap used

  Diagnostic information: ⓘ

  February 1, 2016, 14:05:24 Self test - passed

  1 February 2016 13:47:18 / Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_2016-02-01-134718_ [redacted].cpu_resource.diag [details]

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.Networking.xpc/Contents/MacOS/com.apple.WebKit.Networking

  Is very slow, or just web browsing? Was - this slow until you have changed the network?