Boolean single value Cluster

Similar Questions

• False Boolean input values Cluster

  Hi all

  I seem to be encountering a problem with an entry in one of my screws as shown in the image below, I have a while loop with a structure inside the event. I'm pass in a set of values of Boolean control, which is modified by a series of input user data guests in a case of different events. When it is passed to the case in the image, the values, as seen in the 5 probe, are correct. However, when it is received by the first Subvi in the structure, the values are all wrong as seen by the probe 6.

  So far I have tried:

  -Closing and reopening of LabVIEW

  -Recreate the control via the probe wire 5 and re-wiring of the input

  -do the command "synchronous display.

  Thanks in advance to be able to help someone!

  You still have one of these hidden under the function, functions that you can see.  Your entry clusters are wired to one.

  BTW, have your entries failed to required would have found it.

  

• travel-vmhost error - the destination of the specified parameter expects a single value

  I run in an error using Move-VMHost under PowerCLI version 5.5 R2 Patch 1 and 5.8 Release 1.

  There are 6 clusters in the data center.  To the host of the virtual machine between 5 of the clusters that I can run successfully:

  Get-VMHost vmhostname | Moving-VMHost Destination 'NOMCLUSTER '.

  But one group in particular always fails when it is specified as destination of the error message:

  The specified parameter "Desintation" expects a single value, but your criteria of name "cluster6" corresponds to multiple values.

  The only way I can get this working is to do:

  Get-VMHost vmhostname | -Move Destination VMHost (get-cluster | where {$_.name - eq "cluster6"})

  How 'cluster6' could correspond to several cluster names?  Is this just a bug in PowerCLI?  I started using PowerCLI more recently and noticed that some cmdlets can be a bit odd (for example had a few other problems with Get-VMHostStorage and found others have had similar problems with it).  I use this process of moving part of a more automated deployment script.  Prefer to make it as efficient as possible without having to insert the extra if possible Get-Cluster command.

  The Destination parameter on the Move-VMHost cmdlet accepts any VIContainer, not only the clusters.

  I suspect it could VIContainer one another with the same name.

  What this does?

  Get-inventory-name 'cluster6 '.

• "expects a single value / corresponds to multiple values" error script New - vm in PowerCLI

  I have been responsible for creating some 800 + virtual desktops so, naturally, this is something I want to script.  After reading through the large bases of knowledge here, I was able to create what I thought, it was the correct code.  It worked when I was just "write-host" ing lines command to see if the variable creation/uasge worked well.  When I removed the lines of write-host and tried to use the actual orders new-vm, I started having different "of the specified parameter '$vmhost' expects only one value, but your criteria of name ' xxx - vm53.yyyyyyyyy.com' correspondingponds to several values." errors.  Here is my code, marked specificities:

  Add-PSSnapin VMWare.VimAutomation.Core # PowerCli add script environmen t
  $creds = get-vicredentialstoreitem-'c:\temp\credfile.xml' # chopped access file password to authentice with "sys" service account from the file
  connect-viserver-Server $creds.host-$creds.user username-password $creds.password
  $host1 = get-cluster "HVD1" | get-vmhost | Tri-objet "memoryusagemb" | Select-object - 1 first | foreach {$_.name} # get the VMWare hosts with less use of the memory of the cluster host "HVD1" registration
  $dstore = get-datastore ' vdi_ * ' | Tri-objet 'FreeSpaceMB' - descending | Select-object - 1 first | foreach {$_.name} # Get datastore disk with most freespace to be VDI_ *
  $VMBaseName = "XX-P01-HVD" # definition of trade names XenDesktop hosted
  $Template = get-model model-CBD-XD-XP | Select-object - 1 first | foreach {$_.name} # Setting for XenDesktop hosted Commercial model
  $OSCustSpec = "CBD - XD XP" hosted # Setting for hosted Commercial XenDesktop customization script
  $loc = 'Desktop' # configuration for XenDesktop folder
  $ResPool = get-resourcepool XX-P01-HVD | Select-object - 1 first | foreach {$_.name} # XenDesktop hosted Commercial resource pool setting
  [int] $FirstNumber = 0
  [int] $HostTotal = 0
  [int] $ctr = 0
  
  $FirstNumber = Read-Host "enter the first digit to the VMWare host range".
  $HostTotal = Read-Host "enter the quantity for the VMWare host range".
  $HostNumber = $FirstNumber
  $HostFinal = $HostNumber + $HostTotal
  
  do {}
  $vmname = $vmbasename + $HostNumber
  new-vm - vmhost $host1-name $VMName - $ResPool - $loc location ResourcePool - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizationspec $OSCustSpec # Execute the new VMWare host creation
  Start-vm $VMName # start the virtual machine to start the customization process
  $HostNumber ++
  $ctr += 1
  If ($ctr - eq 5) {write-host write-host "break 10 Minutes' sleep s 600; $ctr = 0; write-host} # sleep for 600 seconds every 5 VMs to avoid overloading ESX hosts
  } until ($HostNumber - eq $HostFinal)

  Here are my mistakes:

  
  New - VM: 23/03/2011-17:42:22 new-VM parameter specified "VMHost.
  expects a single value, but your criteria of name ' xxx - vm53.yyyyyyyyy.com' corresponding
  ponds to multiple values.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: InvalidResult: (System.Collecti... dObjectInterop)
  (]: List 1) [new-VM], VimException
  + FullyQualifiedErrorId: Core_ObnSelector_SelectObjectByNameCore_MoreResu
  ltsThanExpected, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
  
  New - VM: 23/03/2011-17:42:23 new-VM parameter specified ' Resourc
  ePool' expects a single value, but your name criteria is "XX-P01-HVD.
  multivalued.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: InvalidResult: (System.Collecti... dObjectInterop)
  (]: List 1) [new-VM], VimException
  + FullyQualifiedErrorId: Core_ObnSelector_SelectObjectByNameCore_MoreResu
  ltsThanExpected, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
  
  New - VM: 23/03/2011-17:42:23 new-VM parameter ResourcePool: could not
  t find any object specified by its name.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: ObjectNotFound: (VMware.VimAutom, ol ResourcePo)
  OL:RuntimePropertyInfo) [new-VM], ObnRecordProcessingFailedException
  + FullyQualifiedErrorId: Core_ObnSelector_SetNewParameterValue_ObjectNotF
  oundCritical, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  I had multiple values for some of the entries, that's why I tried to analyze with the first '-1' and outside the script, the values return very well.

  Any help?
  

  And this is the cause of the problem.

  You feed the New - VM name in fact only 1, and the cmdlet, by OBN, tries to resolve the name into an object.

  But since there are 2 connections, it will get an object returned by each connection.

  Where the multiple value message.

  Check if you have several Connect-VIServers in the script and maybe close all connections before the script starts.

  Or switch to simple mode with the Set-PowerCLIConfiguration cmdlet.

• Retrieve a single value from a file .lvm

  I have a large batch of files of worksheet whose name is a timestamp. I am writing a program that will get the value of a specific cell (the same cell in each file), coupled with the timestamp and each of them as a pair of coordinates, then save in a master spreadsheet. The goal is to extract a point each of the 700 files I and compile them into a single file.

  However, I've never used Labview to read the files before. I saw some stuff on how to read an entire worksheet in a table, but I was wondering if there was a way to say to Labview to look into a file and extract a single value. I open .lvm in Excel files, so, in my mind, I would be taking, for example, cell D2. Is this feasible? Should I read the entire worksheet in an array and use the index to pick it up on the table? If I do, how I would specify cell J2 as an array index (I have no experience with the berries in Labview either). In addition, if you have any tips on how to record easily 700 pairs of coordinates, that came together in the order, to a single spreadsheet, that is my next task.

  Essentially- I need to extract a single value of a spreadsheet in, ideally, the simplest possible. In addition, pointers on how to save the numbers gathered at each iteration of a while loop to a single worksheet are welcome.

  Thanks in advance for the help!

  FYI I have LabView v8.6

  You can't say LabVIEW to 'out' a specific 'cell' more you can tell Notepad to do. the .lvm files are just text files. When you open them in Excel, the column separator (default tabs) show to put the values in columns. In LabVIEW measurement file VI reading to read .lvm files. It creates the dynamic data, wrong data type that is next to useless. You will need to convert this type of data in a table by using the function convert of DDT. Or, you can use the VI read spreadsheet file. This will give you a table directly. You can just remove the specific item using the table to Index.

• How to write a single value in an excel spreadsheet

  Hello

  I use an excel spreadsheet, as if it were an external code module. He does a lot of calculations, all I do is write an individual value, let calculate what it should only then read a return value from this.

  I already have a structure able to read a table, but could someone help me with a piece of code that could write a single value?

  (To read a value unique too may be practical)

  Also, I have the new LabVIEW 2009, so while a fancy to drop some code here as one. PNG, it would be nice to see if this new feature works!

  Thank you, Alec

  Try this. There are 2 point methos (get) and point (put) to read and write the value respectively to a cell in excel.

  Good luck

• ERROR: The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.

  Hello

  I am writing a script to create the new VM (base clone of a virtual machine) in a specific folder.

  When you run the script, I get an error:

  The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.

  Some research led me to a post of 2011, which describes the same error. The only thing is, I can find no trace of open connection and then a more...

  What I tried:

  I run the script on the server for vSphere, so I closed the open vSphere client.

  closing ('disconnect-viserver") all existing connections in the first line of the script-> an error because no connection is open.

  In several places in the script, add the following lines:

  ECHO ' - '.

  $DefaultVIServers <-as noted in the post of 2011

  ECHO ' - '.

  This shows that no connection is open until I do the "connect-viserver", subsequently, apparently, that a connection is established.

  the results and the (current) script are found in the files to attach.

  I also found an error on the "set-PowerCLIConfiguration that I can't explain.

  One last question... Is there a possibility to have the new virtual machine created through 3 hosts? the first on the first host, the second on the second, the third on the third, the fourth back on the first host,... and so on?

  Any help would be appreciated.

  Thank you.

  Johan

  Of course, you can provide the full path, for example see my post of folder by Path .

• 11g Question: Stand alone database vs single node cluster

  We are about to create a new 11.2.0.3 database that will eventually become a 11.2.0.3 in cluster database. Our host servers are hardware IBM pSeries AIX 6.1 running. We will use just Oracle Clusterware and not IBM HACMP. We also plan to use ASM for database storage. The plan is ultimately to have a 2 or a 3-node cluster, but currently, we have only an AIX server available to us.
  
  My question concerns our initial approach to the installation.
  
  It is preferable to install the Oracle database as a stand-alone database first and then convert the database to a RAC cluster as soon as we have the material for the second node? Or would it be better to create the cluster with a single node and install and configure grid Clusterware for a single node cluster and then add the second node when the material becomes available?
  
  I apologize if my explanation is not very clear. Any notice will be considered and appreciated. Thank you.

  Hello

  We are about to create a new 11.2.0.3 database that will eventually become a 11.2.0.3 in cluster database. Our host servers are hardware IBM pSeries AIX 6.1 running. We will use just Oracle Clusterware and not IBM HACMP. We also plan to use ASM for database storage. The plan is ultimately to have a 2 or a 3-node cluster, but currently, we have only an AIX server available to us.

  My question concerns our initial approach to the installation.

  It is preferable to install the Oracle database as a stand-alone database first and then convert the database to a RAC cluster as soon as we have the material for the second node? Or would it be better to create the cluster with a single node and install and configure grid Clusterware for a single node cluster and then add the second node when the material becomes available?

  If you are planning to ACTIVE/PASSIVE here database my option:
  {message: id = 10138477}

  If you are planning in the future use a RAC database:
  {message: id = 10142640}

  If you plan use CARS in the future, you can install Oracle Clusterware without worry about licenses.
  Oracle Clusterware can serve to protect any application (reboot or otherwise on the application failure), free of charge, if one or more of the following conditions are met:
  

• At least one of the servers in the cluster is allowed for the Oracle database (SE or EE)
  http://docs.Oracle.com/CD/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ

  If you ARE database Oracle or EA (i.e., not one SE), you can install the product Oracle Clusterware and Oracle RAC (EE to buy the RAC Option) in a node later you can stretch clusterware adding additional nodes, and more database instance.

  You do not need to create a RAC database, you can create a single database (i.e. Non-RAC) on OH software Oracle RAC using DBCA.

  Although I prefer that you create a database of CAR Policy-Managed database... which makes the dynamics and the automatic (i.e. managed by Clusterware) creation/deletion of instances. You will use a POOL with a knot... later you can add more nodes in that POOL... Oracle Clusterware/PAP automatically create undo/redo/instances on the new nodes added to this POOL.
  All this is transparent to your customers of Oracle.

  Oracle Grid Infrastructure for a stand-alone server (Oracle Restart) is an option only if you plan used to one node. If you are using more than one node... Start with Oracle Grid Infrastructure for a Cluster (Oracle Clusterware).

  Hope this helps,
  Levi Pereira

  Published by: Levi Pereira on March 12, 2012 13:58

• Convert multiple lines in a single value separated by commas

  Is is possible to convert multiple lines in a single value by concatenating the value of each line in OBIEE. I think that IO had seem a blog related to this by I'm not able to find him. Essentially, here's what I would do:
  Number of customer location
  101
  101 NY
  101 PA
  102 TX
  102 CA
  
  This is to convert
  101. HE, NY, PA
  102 TX, CA
  
  Can you get it someone please let me know if this is possible and how to operate it.
  
  Thanks in advance for the help.

  You can do this by creating a DB function,

  Visit this link
  Re: Display of the horizontal values

  Thank you
  Vino

• With a single value pie chart

  Hello Experts,
  
  I am new to the apex.
  I want to draw a pie with a single value.
  that one value should resemble a slice in the pie chart.
  I tried, but it shows that any graph as a value.
  
  So please help me in this regard.
  Its very urgent.
  Please, I beg you.

  Hello

  I don't know if I understand your question, you want to pie chart or line chart? If you draw two lines in a single chart, you add another series to the chart. Click on the graph and click on add another series, enter another sql for the series and you should be all set. Thank you.

  Kind regards
  Manish

• How to use Boolean loop values from 2 different sources to stop awhile?

  I'm working on a program for homework indicating E5.4) using a single eLoop Whil, build a VI that runs a loop N times or until the user presses a button. Be sure to include the time delay Exress Vi so that the user has time to press the stop botton.

  I am doing this right now, but it seems I can connect only one thing at the stop sign onto th while loop. It won't let me connect a comparison between iterations and N as well as the stop button at the stop sign onto all loop. So, how would I be able to structure so that it stops if it receives a true Boolean value of one of the 2 sources (both whichever)?

  Basically, I can't thread the result of the comparison of N and iterations as well as the stop button the stop on the loop about button to put an end. is there a solution?

  Thank you!

  Rajster16 wrote:

  Using a single eLoop Whil, build a VI that runs a loop N times or until the user presses a button.
  

  Look in the Boolean palette for something similar for the word highlighted in red above.

• Mechanical locking action does not not for boolean within a cluster table

  I am currently on LabVIEW 2012.0f1 and I noticed that if you were to create a typedef of cluster that has a Boolean control with the mechanical action of the latch and then put the said cluster within a table, the Boolean value will act as a switch instead of a lock if read in a loop or an event structure.   Is this a bug or an expected behavior?  Whatever the answer, how can I get my desired action of a latch behavior?

  Thank you

  I don't think it's a bug.  It is consistent with a table.  If you put a button inside a table, you cannot set its mechanical action more.

  

• Write multiple events created for a single value (signaling)

  Hello

  I have a program that checks continuously to check if a given amount of time has passed (e.g. 10 seconds). I pass the Boolean result to a case statement. In the case of FALSE, do nothing. Inside the case TRUE I wired the switch entry dealing with a property node: Val (Sgnl) in order to trigger an event. The actual value is not important, I just use it to trigger an event.

  When you view the event inspector window, I see two events are sometimes created at the same time, which causes problems in the rest of my code. I have the option 'max limit Instances"checked in the menu change events, as well as the number of Instances the value 1.

  Can someone please explain why this is happening and recommend a solution?

  Thank you.

  -Natsfan

  Add a wait of 1-2 ms to the loop in your main calendar.  It is conceivable that the loop takes less than 1 ms to run and you see the same time at two subsequent iterations of your loop and that's why you get sometimes two close triggered events

  I would not use a separate at all, but directly control the timing of the event timeout.

• WAP321 two Pat same SSID on the same piece with the installation of single point / cluster

  Hello!

  It has bought several WAP321.

  We have a room which has about 40 books, so I will deploy the two Pat in there (according to recommended 20 clients per WAP on specifications).

  I configured the first WAP, created a cluster and the SSID, then joined the second WAP to the same cluster with the installation of single point, he received the same cluster radio settings (SSID, WPA2 key, etc.)

  My requirements are:

  1: configure all laptops with the same unique SSID created on the WAP (which has spread to the second WAP via single point of installation/cluster)

  2: having the laptop connect automatically to one of the Pat.

  3: If a WAP fails, the laptop can connect automatically to the other.

  Is this possible?

  If Yes, are the measures taken are correct, or is there something else? (and how does the cell know what WAP to connect if two WAPS is configured with the same SSID?)

  Thank you very much!

  Hello

  Thanks for posting your question on the forums.

  Setup you had set up will work fine for your application, I highly recommend to make sure that you have two AP running on different statically assigned channels, you can put one on channel 1 and the other on Channel 6 or 11. This will prevent them to conflict with each other.

  Now, there is no real way to select what AP you connect or even know that you you already connected to without special software, in fact, when a device gets on the network and seeking to connect to the radio will connect to the first point of access that meets the demand, if it is no longer available then it forwards the request again and it will connect to one who works.

  I hope this helps. Please let us know if you have any other questions

• The element of Interaction of the user does not correct my Boolean attribute value

  Hello

  I'm just starting using the element of User Interaction. In my workflow, I set several attributes - some string and a Boolean value. I have a script task that makes treatment and eventually set these attributes. I then a piece of User Interaction that has these characteristics than external contributions. The Interaction of the user unit shows the correct values to strings, but the Boolean value is always shown as wrong - regardless of what I put the attribute in the script task immediately preceding.

  I'm confused. I plugged everything in the binding in the same way, but it does not seem to reflect the State of the attribute. I can switch the Boolean value in the Interaction of the user and the attribute is replaced as expected.

  Thank you

  Edit: I have reproduced this issue with a very simple affair. Make a new workflow and put only a part of the Interaction of the user in it. In the UI element, create an external of entry as a Boolean attribute of the workflow. Default font to True/Yes. When you run the workflow, the user interface element shows the value as a no.?

  Hello

  Looks like a bug in the client Java vRO (but works in vSphere client to Web). I am able to reproduce it in my environment, on the two vRO 6.x and 7.0.

  I'll open a PR in order to track and remedy in the future vRO releases.

  BTW, I vaguely remember there is a reported similar problem long time for vCO 4.x. It seems that the problem has reappeared again in silence