Boot Camp can not detect Windows software support

Similar Questions

• Boot Camp can not install Windows because of the formatting?

  I have a 2012 MacBook Pro (500 GB to 8 GB memory storage) with the OS X 10.11.3. I try to install Windows 8 Pro (64-bit) using Boot Camp. When I restart my computer after creating the partition, I have two USB ins journal. They say Windows and the other says Boot EFI. When I click on the option of Windows, I am taken to a screen that says that there is no bootable disk and restart with an inserted. When I click on Boot EFI, I did get into the Windows partition and can start set up for installation, but when I get to the stage where it asks me to install Windows, none of the listed drives are able to have Windows installed. I have a list of 4 disks, all drive 0 and then partition 1,2,3,4 respectively. 4 is the one that is 46.6 GB (I created Windows to be 50 GB), so I guess it's that I need to be installed in. However, when I click on any of the partitions, this message appears: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks. Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. "After talking with the Apple support (who told me it was a matter of putting in the form any and to talk to the Windows how do I reformat) and Windows support (who took the opportunity to remind me why I had stopped using them in the first place), I think I have a better idea of what it means , but I have no idea what to do about this. Anyone have an idea how I can fix?

  You have two choices.

  1. use GPT Fdisk to delete the MBR and continue boot EFI. Later, it is problematic when you install the drivers for the Apple hardware.

  2 use a USB2 flash drive and let BCA create setup of USB and partition your drive. No matter what Manual partitioning or manipulate the installer USB can cause problems.

• Wizard Boot Camp can not be used. The Mac doesn't support Boot Camp.

  "Cannot use boot Camp Assistant. The Mac does not support Boot Camp. "What's the problem?

  ybshi wrote:

  "Cannot use boot Camp Assistant. The Mac does not support Boot Camp. "What's the problem?

  We have no idea. You don't not said us what model/year-computer you have. If I had to guess I have told your Mac does not support Boot Camp.

  Check here if your Mac supports Boot Camp: http://www.apple.com/support/bootcamp/

• Boot camp does not start windows 7 alley

  I have the following Setup: Windows 7, Mac OS X Lion 10.7.3 and Boot Camp.

  The only thing I did was Boot Camp Manager to select Mac Windows as boot drive (at the time there was only 1 icon visible in the window, not the 2 that you expect!) (1 for windows and 1 for OS X).

  After the start of Mac I can't get back into Windows more. Now the ALT/Option key does not work, I do not receive the start of disk icons, he begins just to Mac every time. Configuration screen/boot that Mac disks is also visible.

  But if I run the Boot Camp Assistant, it gives me the opportunity to remove from Windows 7, it seems that Windows 7 is here!

  Here is the output you'll probably ask, from the following commands:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  diskutil list:

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: EFI 209,7 Mo disk0s1

  2: Apple_HFS Macintosh HD 250,6 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 202,3 GB disk0s4

  Cs diskutil list:

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1                         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 489531248 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  489940888 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  491210424 1067110728

  1558321152 395202560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  sudo fdisk/dev/disk0

  Drive: / dev/disk0

  geometry: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-489531248] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [489940888-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [1558321152-395202560]

  I hope you can help me trouble Boot Camp and give me access to windows again!

  Kind regards

  Marijn

  Resize you your Windows partition?

  Can you use El Capitan has deleted my windows bootcamp partition as reference and download Testdisk and GPT Fdisk and run a scan of Testdisk and a quick search.

• IM using windows 7 Home Premuim a di can not find windows software for burning image disc anywhere I searched everywhere on start search for assistance please

  as the lines of topic title says im using windows 7 Home Premium and I cannot find Disc image burning software Windows anywhere I looked everywhere search is someone help please I want to try windows 8 for the first time for games and other stuff

  If you burn one. File ISO, right click the. ISO file, click on burn disc image.

  or

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

• Boot Camp can not be used - disk is not logged

  Hello

  Was just looking around for a solution to the "disk cannot be partitioned" and led me to stop FireVault and check if my hard drive has had problems.

  I came back to test if these solutions had worked and got this:

  

  I tried to enter disk utility, by clicking on my HDD, and then file > enable logging, but activate logging is grayed out and I can't click on it.

  Any help?

  Thank you

  Dave

  1. in what year/model is your Mac?

  2. what version of Windows you are trying to install?

  3 can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  4 do you have an external storage connected to the Mac using BCA?

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• Boot Camp will not install on Windows 10 (end of 2015 imac)

  Bought an imac 27 "5K retina, end of 2015

  1 TB - (not the Fusion drive)

  OS X El Capitan

  All applications are updated on both OSX

  Version of Windows 10 Education loaded 64 bit ISO file (3 times 2 of 1 Flash of office)

  After loading Windows 10 - installation of Boot Camp program starts - but after a few minutes, I get a little window with a red X

  The installation stops (I tried the OK TWO hit and hit X to close small, then the windows in the "Installation")

  But no Boot Camp file is installed (worked with Apple Care - but they don't have any other suggestions.)

  How can I get the Boot Camp assistant on the Windows partition? I can't find Boot Camp 6 downloads anywhere.

  I don't have files from Boot Camp on side Windows to run (or disk Flash Drive)

  Windows runs and work THOUGH - I have questions - no sound, the mouse does not scroll, have not spent a lot of time to discover other issues.

  Another thing to NOTE - on the side of OS x with Boot Camp Assistant - I don't get always the choice to select tasks - that is not available - my boot camp assistant didn't need to start from a flashdrive (external drive) it will be the start of a download of office. I thought to use Boot Camp Assistant to load the ISO on the flash drive - but I do not get this option (select tasks).

  Any help is appreciated - is there an external way to download Boot Camp 6?

  1. What is your Windows language setting?

  2. you can get the drivers BC6 W10 from Apple.

  

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion dv2500: can not detect our connection to wifi PLDTHOMEFIBR (our own connection)

  Hello community of Hp.
  
  I have a problem with my PORTABLE HP PAVILION dv2500 PC.
  
  A few months ago, everything is ok.
  
  It can detect our wifi.
  
  then yesterday I just know that it can not detect our wifi at home.
  
  I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.

  I already perform some troubleshooting method.

  the first thing I did.
  
  is that I perform a RESET of my modem.
  
  because I think that the IP of my laptop has been block by my modem.
  
  If, after that, it's the same. It can not detect our wifi.

  second is.
  
  I reformat WINDOWS Vista x 64.
  
  but it's the same thing.
  
  It can only detect our neighbors wifi. but our is not.

  last thing I did was to change the ip address of my laptop.
  
  but it did not solve my problem either.

  pls help me solve this problem.
  
  
  
  Thank you.
  
  and God bless you all.
  
  more power for the team of hp with this site.
  
  
  
  Please send me an email or comment here if you have an idea on how to solve my problem.
  
  [Personal information]
  
  Thanks again and best regards.

  Hi @BooJimBoo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.

  If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.

  Some say that this download will help fix this Microsoft Fix it.
  
  Here is a linkto help as well.
  
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Why my computer can not find windows Defender?

  Why my computer can not find windows Defender?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  Hello

  Can you please follow the instructions below.

  1. Click on the link below and open Photoshop Elements download link.

  Note: We are not anything downloaded from the page of Photoshop Elements.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  2. then click on the link below and download the installer directly mentioned in step 2.

  • for windows

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/Win64/Lightroom_6_LS11.exe

  • for mac

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/OSX10/Lightroom_6_LS11.dmg

  
  

  
  You can run the installation file once the download is complete.

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Creative clouds of Penny assinante da, com o lightroom photoshop... e paguei por um ano uso produto, mas com a CC Photoshop 2015 I can not but atualizacao software usar o...

  Creative clouds of Penny assinante da, com o lightroom photoshop... e paguei por um ano uso produto, mas com a CC Photoshop 2015 I can not but atualizacao software usar o...

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "