boot does not work

Similar Questions

• Windows 8 Advanced Boot does not work * SOLVED *.

  I recently got the Ouya console and I'm looking to develop games for it. Part of the configuration forces me to install the drivers manually unsigned, but Windows 8 prevents this from happening. I need to disable driver signing enforcement and I read that you can make settings PC > General > early start.

  The PROBLEM is when I have go ahead and click on troubleshooting and advanced startup, the screen goes black and nothing is displayed. I tried auto repair and it does the same thing! A normal restart works fact just fine and if a normal stopping and starting at the top. The computer itself still works as I can hear it and can switch on and off on my keyboard caps lock (I see the light switch on). I have to reset hard at my computer in holding the power at this point button. The strange thing is that I have a Macbook Pro with Win8 installed on it and the advance set up works very well! I would just use it but my office is a much better computer and my mac just don't cut it for development.

  Someone at - it suggestions? Could this be my hard drive failing quick start? Or maybe my graphics card is just crazy?

  I have a MSI 6850 with the latest amd for win8 64-bit drivers.

  Very well. The MSI graphics card in that I added WAS the question. I opened the office and put in the Nvidia GT 620, one computer comes with and it works beautifully. Guess I'll have to buy a new graphics card and nvidia make it this time. !

  : D

• repair boot problems boot does not work

  I have windows vista home basic with version 6 of windows and have accidentally deleted some programs affecting my startup registry and wlidcli.dll and I don't have my original installation cd what can do?

  Hi Dennis,

  Wlidcli.dll file is related to the Windows Live program.

  You receive messages or error codes? If Yes, what is the complete error message you receive?

  Step 1:

  If you are unable to boot into normal mode, you can try to perform the last good known Configuration and check if it helps.

  Using the last good known Configuration

  Step 1:

  You can also check if you can boot into safe mode and let us know the results.

  Start your computer in safe mode

• The boot does not work

  When I went to "reactivate" the computer and the monitor; a message from the monitor No Signal appears even you the computer is on.  I have to restart to get into the computer.

  I went the fix it Center and it's even a little weird.

  When I went to "reactivate" the computer and the monitor; a message from the monitor No Signal appears even you the computer is on.  I have to restart to get into the computer.

  I went the fix it Center and it's even a little weird.

  The operating system is Vista, and there had been many recent changes in the last few days:

  -UPDATE INSTALLS
  Adobe Flash Player 11 Plugin
  Update of Java 6 33
  QuickTime
  iTunes
  -DEEPER CLEANING
  -RESET THE POWER SETTING
  Thanks to your communication I downloaded the latest drivers from device, is back and reset various settings including the USB key that had been turned off and do it now running.
  Thank you for your answer

• Start > Panel > system and security > your computer backup does not work

  When I click 'save your computer' nothing happens. I tried all the solutions I found here and other forums. I checked the level backup engine service block, Volume Shadow Copy and backup Windows are set to automatic and are running. I ran sfc and he found no problem.  I am able to start sdclt.exe / configure in a command window and it runs and gets "Starting Windows Backup followed by implementing backup...". and more of what seems to be OK.

  I can't just start it fron Control Panel. Everything else on the control panel works fine.

  Help, please

  JJ

  Hello
   
  1. what exactly happens if you mean when you talk about "clean boot does not work? Please provide details.
  2. have you tested the issue in a new user account, as suggested earlier?
   
  Boot fails only when you have disabled a vital service of Microsoft (S). You must observe extreme caution when performing the clean boot procedure.
   
  Note: Don't forget to restart your computer as usual after the clean boot.
   
  PS: Your son is better suited to the Performance category, so this would be moved (Again) to performance and maintenance
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Qosmio X 870-Linux Boot CD does not work

  I disabled safety boot in BIOS and tried to boot from a Ultimate Boot CD and a MemTest86 bootable cd + and the two no longer starts. A Windows CD boot perfectly. Is there something that I am missing?

  They work on my other computers.

  Thank you
  Tristan

  Hello

  BIOS Qosmio X 870 does support UEFI / MSC mode?
  If Yes, switch from UEFI to MSC mode as described here:
  http://APS2.toshiba-tro.de/KB0/TSB2B03F30002R01.htm

  If it still does not work, I recommend you to check the created discs since these two options must be changed in order to boot from other sources.

• Pavilion g6 2307el: LEGACY BOOT SELECTION does not WORK

  Hi, first sorry for my bad English , I have a big problem...

  4 days ago, that I decided to install a new os on my pc (pavilion g6 2307el).

  I installed win 7 64 bit, and to do this, I enabled the legacy boot.

  now, I have some problems with some drivers and for this reason I want to change my os originally win 8 64-bit.

  I have the original cd of victory CV 8 (when I installed win 7 has deleted everything on my pc; recovery partition ecc..) but it does not work... Infact when the legacy box is turned on and I press the f9 key I see 2 option. boot to the efi file or boot from the hard drive (I can't see cd boot or boot usb or other) and when I put inherited boot off the system tell me that it isn't any os on my pc, and in this case when I Press f9 I don't see anything...

  Please, I want to return my windows 8...

  can someone help me?

  Hi @pavilion9512

  Thank you for your request! No worries for tyour not English, also long as understand us each other, that we are very well.

  I understand that a few days ago, you wanted to downgrade to Windows 7, but after doing if some drivers were not available.

  Now, you want to perform a recovery from the disk that you created but are unable to get the option to boot to the optical drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order which will facilitate this process.

  Good luck!

• Boot Camp Windows 10 Upgrade does not work

  Hello world!

  I use Windows 7 Professional SP1 with boot camp, I managed to function very well.

  I bought a legal copy of Windows 7 Professional and active, it yesterday, so all is good and works as it should (more or less)

  I did it on my iMac 5 k (end of 2014). I use version 6 of boot camp and installed all updates in OSX as well on Windows 7 via the apple software update tool.

  Now, I decided to upgrade to Windows 10 but somehow it does not work for me as it should.

  I am able to do 10 downloaded Windows and Setup will start, but immediately after it will crash.

  I use the German version so I can only tell you what is presented here:

  "eine handcrafted befehlszeile [/DynamicUpdate] angegeben wurde.

  I don't know what the problem is, I tried 3 times more using the Microsoft upgrade page.

  I also tried the MediaCreationTool but I still get the same error at the beginning of the installation.

  What I need to install additional drivers on my USB dongle or do I have to remove my USB mouse and the USB dongle (which is always to have the files to install boot camp Windows 7 top)?

  I don't see what else to do and hope that someone here knows how to perform the upgrade properly.

  Kind regards

  ela7ion

  Update!

  The upgrade succeeded finally!

  I managed to do the upgrade after removing all devices that are connected to the iMac before.

  This includes:

  -SuperDrive

  -USB mouse

  -USB dongle

  I then started the tool to upgrade from the Microsoft Web site and guess what: it worked.

  Best regards

  ela7ion

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

  Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

  Hello

  1. do you receive any error messages?
  2 has there been any changes made on the computer before the show?

  Method 1:
  If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem persists, you can create a new user account and check if the problem still persists.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3:

  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
   
  I hope this information helps!

• Dual booting of Z3 tone does not work after update Marshmallow

  Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

  I don't think he has a...

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• My new laptop has crashed and disk backup does not work, can download a boot disk for Windows 7, I hit legitimate?

  My Acer 5745 laptop crashed, my backup boot drive does not work. The laptop was running Windows 7 when I bought new in November 2010. Y at - it somewhere that I can download a floppy or a recovery disc?  'The Source' store where I bought will not help, they said they had to go back to Acer and it could take up to two months to return to a charge of about $170.

  Thanks for any help, someone might be able to give.

  A laptop bought at that date will still be under warranty, there should be no costs involved, contact Acer technical support.

  I guess by the backup startup disk, you mean the set of recovery disks you did when you first used the PC?

• slow boot with an error message after + "entry" does not work

  My Firefox opens not instantaneously, but after awhile, it displays a message that one of the scripts have dropped with options to continue or stop the script. After the opening of the main window there is a message that Firefox is unable to open the toolbar. 'Enter' does not work in the address bar after this question.

  Screenshot of the message: http://i1176.photobucket.com/albums/x322/mveits/Firefox/Capture.jpg

  I'll add more information on request.

  It is also indicative of a problem with an add-on. Use the method in the link I posted above to identify what is causing the problem.

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.