boot error 2000-0141

Similar Questions

• XPS M1330 error Code 2000 - 0141

  Hello

  I use a Dell XPS M1330 like a laptop and main computer.  I turn off night but work on it fairly regularly throughout the day.  I was recently working on this subject, and he's locked.  CTRL Alt Delete did nothing, so I had to do a hard restart.  When it started, I got error code 2000-0141, does not not not my hard drive.  BIOS not found anything.  I off for maybe 15 minutes and then try again.

  I can now boot windows... a little.  I can either start normally or repair mode (recommended).  I tried to fix the mode and he sat there on the screen for about 4 hours.  I tried in normal mode, and it loads in continuous (1: 00, still no start with microsoft windows bar continuously flashes).

  So now I lead nowhere, but the computer does not recognize the hard drive now.  What is an overheating problem?  What can I do?  I'm working on my laptop, so I suffer serious withdrawl.

  -Sim

  
  

• System unexpectedly stop restart and go to the blue screen "error code 0141.

  Original title: error code

  my lap top is suddenly happened to bluescreen, shut down and then after reboot, one, (error code 0141), appears. can you please tell me how to fix this?

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks like you have a problem with Windows Vista, getting automatically restart with a blue screen.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?
  2 what happens while accessing any special request or programs?

  I suggest you to check the information contained in the event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Perform a clean startup will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows vista: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233

  Resolve stop (blue screen) errors in Windows 7 (similar to a few steps of the mentioned below, the section applies to windows vista): http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade installation, I recommend you back up your files using windows backup.

  We would be more than happy to help you if the steps above did not solve the problem.

• Satellite L505-13Z - BOOT error

  Hi all, I have a Satellite L505-13Z. After the hard drive recovery, something went wrong and I had only the F12 page.
  I used the recovery DVDs. It worked for an hour to install win7, then he did a reboot and I saw the windows screen, so that it starts again and stopped working: whenever I turn it on, I have the F12 screen, choose a place to start. Hard drive is detected, but if I choose what it I got the "Boot error" and back to the same page.

  I would try Hiren boot to check if the hard disk is OK or not. How will I know if it's only the hard drive or something else?

  Thank you

  UPDATE.
  I used a bootable cd with Hiren and each test on hard disk and RAM are OK, no errors.
  I inserted the DVD to see if he had the option to repair an installation, but do not, so I installed again. In the end, we asked me to remove the DVD and restart; I did and I went to loop: win 7 was updating registry, reboot, win 7 has been updated to register...

  I wondered if the DVD has been damaged, but is no way to download from microsoft, a Windows 7 copy, because when I insert my response series is to ask the supplier...

  What can I do?

  Posted by jazzrock71
  

  Hi all, I have a Satellite L505-13Z. After the hard drive recovery, something went wrong and I had only the F12 page.
  I used the recovery DVDs. It worked for an hour to install win7, then he did a reboot and I saw the windows screen, so that it starts again and stopped working: whenever I turn it on, I have the F12 screen, choose a place to start. Hard drive is detected, but if I choose what it I got the "Boot error" and back to the same page.

  I would try Hiren boot to check if the hard disk is OK or not. How will I know if it's only the hard drive or something else?

  Thank you

• Restart problems, error Disk Boot error, if please install disk and press a key

  Original title: problems of Reboot

  When I restart my computer it say "Disk Boot error, if please install disk and press a key:?"

  Hello

  1. you remember to make changes to the computer before this problem?

  2. have you changed the BIOS boot device?

  3. What is the brand and model of the computer?

  This could be related to:

  · Startup options is not correctly defined in the BIOS

  · A non bootable CD is in your CD player

  · You don't have any boot device

  · You have installed a new hard drive

  · The hard drive is not properly connected

  · Your system files have been infected

  Change the boot order in the CMOS (BIOS) settings so that your disc is the first in the list.

  a. restart the computer.
  b. new computers often display a startup (or boot) menu. In the start menu, choose "Configuration of the BIOS," or "BIOS settings," or something similar.

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DELETE, ESC) or a combination of keys immediately after you
  turn on your computer but before Windows starts. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer again.

  c. the BIOS configuration screen appears. On the BIOS Setup screen, choose the option called "Boot order" or something similar. Startup command settings can also be saved
  under "Advanced settings" or something similar.
  d. Select your drive from DVD or USB drive as first boot device.
  e. restart your computer and see if the problem is resolved.

  
  BIOS WARNING: modification of the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Toshiba Satellite A135 laptop: 0xc000000f - Windows Vista Boot error - > recovery disk does not work, can't get the PC to boot.

  I have read all the info out there and tried many things including using the provided by Toshiba, Vista recovery disks

  I can't go down the screen of boot error, although no matter what I try.

  Is my drive into two partitions, and I am ready to sacrifice one of them if necessary to get the computer to boot.

  Is there a way I can enter directly into the computer and reinstall windows?

  I'm not a pro, then simple instructions are the best.

  THX

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What are the troubleshooting steps you tried to solve the problem?

  3. the problem occurs in safe mode?

  4. don't you try to do the Startup Repair?

  I suggest you try the steps from the link below and check if it helps.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows: http://support.microsoft.com/kb/927392

  Hope this information is useful.

• Windows vista service pack 2 [BOOT ERROR! Oxc0190036 1187/59291 (Faultrep.dll)]

  Help, please!

  I use a sony viao laptop AR71M with windows vista home premium. I tried to update on windows service pack 2 panoramas, but get a boot error after installation
  !! Oxc0190036 1187/59291 (Faultrep.dll)
  I have tried everything I know, but it didn't budge. I had to restore my system several times so that I can continue to use my laptop.

  Hi DaveCole,

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Start Windows Vista with the Windows installation media, and then use the repair feature.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2: Start the system in safe mode and then use the system restore feature.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3: Follow the provided article.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 4: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

• Hard drive failure: error 2000-0142 since current default Scan PC.

  Original title: error 2000 - 0142

  Activities of PC by default Scan on my laptop DELL Inspiron 5520. Hard drive failure: 2000-0142 error what does that mean?

  REDA

  According to the answer by a representative of Dell here:

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19467468/20188938.aspx

  It seems that the error means what it says - the hard drive has gone bad and should be replaced.

  I highly recommend that you only backup your data to another drive immediately and then contact Dell for confirmation about the error and advice on the best course of action.

• receive a boot error @system - 8.1 Win, 64 - bit

  receive a boot error @system - 8.1 Win, 64 - bit

  I started getting an error at startup of the system-

  updaterstartuputility.exe - generates an error

  point to a problem with -.

  c:\Program files (x 86) \common files\adobe\adobegcclient\adobegcclientupdater.dll

  (condensed verbiage) said this may be caused by the application that is not designed for windows or another error.  try to uninstall and reinstall.

  What product / program is this and what needs to be uninstalled and reinstalled/downloaded?

  apparently the .dll file above has been updated on 25/11/2015.  This coincides with the start of the error.

  BTW - what is GCCLIENT?

  Hi Js1209500,

  Please refer to the thread below, similar has been discussed there:

  What is AdobeGCClient.exe?

  Error: Client Application to Adobe GC works nicht mehr

  Let us know if that helps.

• Load table a sequence of image in the same folder: it works, but why the security error #2000?

  I use this code (from Kglad) to load a sequence of images in alternative loaders, in order to make the sequence look like a (silent) movie.

  I have the pictures and the flash file in the same folder. The code work - load sequence, but I'm SecurityError: Error #2000: no security context is active.

  I would add a url somewhere, path or anything is missing?

  var int count;

  var imageArray:Array is ["1.jpg", "2.jpg", "3.jpg", "4.jpg", "5.jpg", "6.jpg", "7 jpg", "8.jpg", "9.jpg", "10.jpg", "11.jpg", "12.jpg", '13.jpg'];.

  var ldr0:Loader = new Loader();

  ldr0.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  var ldr1:Loader = new Loader();

  ldr1.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  btn.addEventListener (MouseEvent.CLICK, clickF);

  function clickF(e:MouseEvent):void {}

  Count = 0;

  loadF();

  }

  function loadF (): void {}

  addChild (this ["ldr" + count %2])

  This ["LDR" + Count %2]. Load (new URLRequest (imageArray [count]));

  }

  function loadCompleteF(e:Event):void {}

  Count ++;

  if(Count<imageArray.Length) {}

  If (cela ["ldr" + count %2].content) {}

  This ["LDR" + Count %2].unloadAndStop();]

  }

  loadF();

  } else {}

  }

  }

  Is there something you want to load that does not exist.  13 jpg is a likely candidate.

  use the function trace to identify.

• Loader: Nan.jpg + SecurityError: Error #2000: no security context is active.

  Hello.

  By using the code below, I get the 2035 error, informing me that my jpg is not a number.

  Same code with the ioErrorHandler bits comments, outputs SecurityError: Error #2000: no security context is active.

  Same code without the NombrAl and with the right way to the jpgs in the string, works fine (charges 16.jpg), as such - var req:URLRequest = new URLRequest("..) (' / images/16.jpg ");

  Any ideas?

  import flash.display. *;

  import flash.net.URLRequest;

  import flash.display.Loader;

  import flash.events. *;

  import flash.utils.setTimeout;

  var req:URLRequest = new URLRequest("..) /images/"+randomNumber+".jpg");

  var loader: Loader = new Loader();

  var randomNumber:Number = Math.ceil (Math.random () * 16);

  function imageLoaded(event:Event):void

  {

  addChild (loader);

  }

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  Loader.Load (req);

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  function ioErrorHandler(e:IOErrorEvent):void {}

  trace (e.Text);

  }

  use:

  import flash.display. *;

  import flash.net.URLRequest;

  import flash.display.Loader;

  import flash.events. *;

  import flash.utils.setTimeout;

  var randomNumber:Number = Math.ceil (Math.random () * 16);

  var req:URLRequest = new URLRequest("..) /images/"+randomNumber+".jpg");

  var loader: Loader = new Loader();

  function imageLoaded(event:Event):void

  {

  addChild (loader);

  }

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  Loader.Load (req);

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  function ioErrorHandler(e:IOErrorEvent):void {}

  trace (e.Text);

  }

• SecurityError: Error #2000: no security context is active.

  I get this intermittent error when I test a web project locally:

  SecurityError: Error #2000: no security context is active.

  I - think - it's a problem loading of an image but the trace statements clearly show its loading, point out the right dimensions, etc.. I looking for two Event.COMPLETE and IOErrorEvent.IO_ERROR sniff and Event.COMPLETE loads very well. However, the image is never displayed.

  Could certainly be part of the code, but the error seems very general. Anyone have any idea what it really means? I thought that I tested that the choice that a local sandbox would choose a security context.

  Thanks for the tips

  I saw that if there is an incorrect path/name in a file to be load.

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• had a blue screen with error Code 2000-0141 message no hard drive not detected.

  I ran AVG Free, but each line said file locked not run testedI repair microsoft and checking watch prblem is still windows update components need to be repaired

  Hi, Mike,.

  Run the following in default mode first and then go back and run it in aggressive Mode.  Before running the tool, go to a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Run in default Mode by using the Fixit from the link below.  Restart and retry Windows Update.  If not effective, run the Fixit in aggressive Mode.  New attempt to update when finished

  FixIt - How to reset Windows Update components

  http://support.Microsoft.com/kb/971058

  Don't forget to return to a normal startup when done.  Try searching for updates in normal mode.

  I hope this helps.

• No drive detected the 0141 error code 2000-0141 msg error code

  OK, we tried 'resettlement' the reader a couple of times but without success...

  And we carn can't actually test the drive on another computer laptop, so we are a bit stuck as computer repair shops can be expensive, but I have no choice to take there eventually, but for now, I'm just gain some knowledge on the subject

  My main concern, if the drive does not completely and permanently...

  That's what all the operating system, it was on a dell inspiron 1525 with a preinstalled operating system "vista ultimate".

  There is no backup of any type, I need some advice on this subject, because vista ultimate is pritty expensive and you really have to buy another copy of the operating system and install it on your new hard drive...

  After all, you've already paid for it...

  The laptops warranty has run out, so I guess there is no help from dell on this one there...

  Thanks for all your replies Chester/uk

  Ask their Dell recovery media.

  You cannot use a Toshiba Recovery disk on a Dell computer.

  And how could install Vista from a Windows 7 disc anyway!

  You can try this IF you know what you are doing:

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  Good luck with it.

  Mick Murphy - Microsoft partner