Boot & Firmware SG300-28

Similar Questions

• Upgraded image of boot for SG300 - 28 p

  Hello

  I have a SG300 - 28 p and I need to upgrade the versions so the boot & firrmware.

  The problem is I can not find the file to start anywhere, the only file that is available on the download page of Cisco is the file of the firmware (".ros")

  These are my current versions:

  Show worm

  SW version 1.3.5.58 (date October 10, 2013 time 17:15:41)

  Start the version 1.0.0.4 (April 8, 2010 time 16:37:57)

  HW version V01

  And I get this warning on startup...

  ***********************************************************

  ***********************************************************

  * Boot version is incompatible with the image of the system.   **

  * Some new features have been disabled.                 **

  * Please update more recent version of boot.                 **

  ***********************************************************

  ***********************************************************

  Hence the need to upgrade.

  Ian was soon

  Ian heath,

  When you download:

  Sx300 Firmware Version 1.3.5.58

  Sx300_FW_Boot_1.3.5.58.zip

  The ha zip file a copy of the firmware and also a copy of the startup code. The startup code must be upgraded via a tftp server. After that the startup code is updated, download and install the latest firmware version 1.3.7.18. (No bootcode with this one)

  -Marty

• Firmware SG300

  I see new firmware is available for the 300 SG switches.

  I can download the firmware file, but when I try to view the release notes there is a message saying access denied and additional authorization is required.

  This can be corrected?

  Looking for this release notes?

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/sf30x_sg30x/Release_notes/R_1.3.5_RN.PDF

• The SG300 - 28 p - Firmware upgrade error

  Greeting is I downloaded Sx300_FW_Boot_1.4.0.88 update of firmware for switch SG300 - 28 p. The MD5 of the file signature match as listed on Cisco, but when I'm the download of the firmware (file .ros) to the switch I get the error message:

  Bytes transferred: 7011840

  Status: Failed to copy
  Error message: copy: the code SW file size is more

  Anyone else having the same problem? No work around?

  Thank you!

  Parth.

  Hello

  I like to think to upgrade the bootloader file(sx300_boot-13506.rfb) first, before trying the firmware. Boot loader are on the same zip folder as the firmware.you can use TFTP server to upgrade the bootstrapper.

  Interface WEB SG300 Cisco > Administration > file management > TFTP... When you select TFTP option for the fw 'BOOT' button is now available. Just type the name of the file and it should load the boot firmware.

  concerning

  Deborah

• List of virtual machines with Firmware Boot set to EFI

  Unfortunately today we met the problem described in this KB.

  VMware KB: Start the virtual machine from Windows using EMC XtremIO storage EFI fails with the error: System startup are not v...

  I was wondering if anyone had a script that could go out and find all the virtual machines in our environment have the value EFI firmware boot option.

  Thank you

  Jordan

  You can do the following to list used by VM boot firmware

  Get - VM | Select Name,@{N='BootFirmware'; E={$_. ExtensionData.Config.Firmware}}

  Or to not see that those who use EFI, you could do

  Get - VM | where {$_.} ExtensionData.Config.Firmware - eq "efi"} | Select name

• WRT1900AC - brick? having firmware new flash hard

  Then my friend tried to put OpenWRT on his WRT1900ac and he thinks that he he bricked. Of course, I'm done with the broken router.

  I have two computers available to try to solve this problem, an iMac with El Capitan and a Thinkpad Windows 10. I have a USB-> TTL series adapter and I disassembled the router to access the terminals of series, I tried flashing the new firmware on TFTP but my utility doesn't even know something is connected to the COM (Yes, I have the right drivers)

  Here's what it does. I turn on the router, and after a few seconds, the power LED flashes. So, if I have an ethernet cable plugged in, the corresponding led lights up. So many Windows, I put my network settings to force 192.168.1.1 and ping 192.168.1.1 succeeds... but he also managed when I turn off the router. (Yes I turned off all other network connections). When the router is turned on and I open a browser at this address, I get a blank page. The gui of Linksys TFTP cannot connect at all. (I get a message like "router has failed")

  From my Mac, it's sort of a different story. I can't find a USB-> COM at all driver, so serial interface is released. But I can manually set my network to 192.168.1.1, ping it when the router is off, don't get no response (good) - I turn on the router, ping, come back successfully 64 bytes (good). I can open 192.168.1.1 in a browser and get the page of "it works!" But if I try to Flash a firmware using the integrated terminal TFTP protocol, I get a time out (as follows...)

  tftp 192.168.1.1
  tftp> binary
  tftp> timeout 120
  tftp> put firmware.img
  Transfer timed out.
  

  So I am all out of ideas, are too recent for this problem in my operating system? I should go out by the live usb Linux Mint?

  Use your computer for Windows 10, it will be easier to update the firmware.

  1. Install the version x 32 or x 64 http://www.jounin.net/tftpd32_download.html tftpd
  2. Then install Tera term https://en.osdn.jp/projects/ttssh2/releases/
  3. Once installed, Tera Term configure it to use the USB port to the port com TTL with the parameters 115200,8, no, 1 no
  4. Power on the WRT1900AC; You should see boot you after the release of text in Tera term; If you do not see the output, it is most likely that you have the RX and TX inverse series. Don't proceed to the next step until you confirm the serial communication is increasing.
  5. Press a key in Tera term during the second pause 5 pause of submarine appears. That you will get a u-boot prompt. Attention here because you can do a hard easy work if you run the wrong commands.
  6. Configure the network card in your computer to the IP 192.168.1.254 netmask 255.255.255.0, no gateway and no DNS.
  7. Connect to the computer via an Ethernet cable to a LAN of WRT1900AC port.
  8. The u-boot prompt, run "ping 192.168.1.254"; If the result is 'living' submarine can connect to the computer.
  9. Make sure your firmware is in the current directory of the tftp server and the tftp server is listening on 192.168.1.254.
  10. To the submarine command prompt run "setenv firmware_name my-firmware - filename.bin" for the WRT1900AC V1 or "setenv firmwareName my-firmware - filename.bin" for the WRT1900AC\ACS\V2 or WRT1200AC
  11. The u-boot prompt, run "run update_both_images" wait for the command to complete.
  12. Then run "reset" or the router power cycle

  To display the u-boot firmware load vars courses run the below to the u-boot prompt:

  1. print Ipserver
  2. IPAddr impression
  3. firmware_name printing or printing firmwareName

• Convert software SRW2048 SG300

  In my view, the SRW series is the same as basic material the SG300 series.

  Is there a way to update the firmware on the series SRW using firmware SG300?

  The SG300 firmware is much more usable. Also I'd rather have consistency we have the old SRW2024/48 and new switches SG300.

  Bob

  David,

  You are on point.

  the 300 series is an Update replacement and hardware and software of the oldest product SRW.

  If you have purchased order p/n SRW2008 the updated version here in the United States that's so order p/n SRW2008-K9-NA

  We made the change in order p/n for reasons of consistency so that if you ordered SRW2008 in the past you order now SRW2008-K9-xx

  where xx is a code region for regulatory requirements and power.

  SRW2008 was a linksys product while replacing, SRW2008-K9-NA, is for example a Cisco product that now takes care of switching L3, IPv6 and a bearable CLI and a whole bunch of new features.

  SRW2008-K9-NA has a cisco SG300-10 p/n internal.

  Refer to the following table a wide for some clarity on this subject.

  This table has been copied and pasted from the public announcement of the EOL, to October 2010 referenced in the URL that follows;

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps9967/end_of_life_notice_c51-632243.html

  Part number of end of sale product	Product description	Replacement product reference number	Replacement product description	More information
  SRW2008-EU	8-port 10/100/1000 Gigabit Switch with WebView	SRW2008-K9-G5	Managed switch of SG 300 - 10 10 Gigabit ports	-
  SRW2008MP-EU	8-port 10/100/1000 Gigabit Switch WebView Maximum Power PoE	SRW2008MP-K9-EU	Switch managed, SG 300-10MP, 10-port Gigabit PoE Max	-
  SRW2008P-EU	8-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2008P-K9-EU	Switch managed SG 300 - 10 p 10-port Gigabit PoE	-
  SRW2008P-UK	8-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2008P-K9-UK	Switch managed SG 300 - 10 p 10-port Gigabit PoE	-
  SRW2016-EU	16-port 10/100/1000 Gigabit Switch with WebView	SRW2016-K9-EU	Managed switch of SG 300 - 20 20-port Gigabit	-
  SRW2024-CN	24-port 10/100/1000 Gigabit Switch with WebView	SRW2024-K9-CN	Managed switch of SG 300 - 28 28-port Gigabit	-
  SRW2024P - TO THE	24-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2024P-K9 - TO THE	Managed switch of SG 300 - 28 p 28-port Gigabit PoE	-
  SRW2024P-EU	24-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2024P-K9-EU	Managed switch of SG 300 - 28 p 28-port Gigabit PoE	-
  SRW2048	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-NA	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048-AR	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-AR	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048 - TO THE	48-Port 10/100/1000 Gigabit with 4 Combo SFP switch WebView	SRW2048-K9 - TO THE	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048-CN	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-CN	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048-EU	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-EU

  Managed switch of SG 300 - 52 52-port Gigabit

  -

  SRW2048-UK

  48-Port 10/100/1000 Gigabit Switch with WebView

  SRW2048-K9-UK

  Managed switch of SG 300 - 52 52-port Gigabit

  -

  SRW208 - TO THE

  8-port 10/100 Ethernet Switch with WebView

  SRW208-K9 - TO THE

  SF 300 - 08 8-port 10/100 managed switch

  -

  SRW208-CN

  8-port 10/100 Ethernet Switch with WebView

  SRW208-K9-CN

  SF 300 - 08 8-port 10/100 managed switch

  -

  SRW208G-EU

  8-port 10/100 Ethernet Switch with WebView, expansion Slots

  SRW208G-K9-G5

  SF 302-08 8-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW208MP

  8-port 10/100 Ethernet Switch WebView, Maximum power PoE

  SRW208MP-K9-NA

  SF 302-08MP 8-port 10/100 PoE Managed Switch w/Gig Links Max

  -

  SRW208MP-EU

  8-port 10/100 Ethernet Switch WebView, Maximum power PoE

  SRW208MP-K9-EU

  SF 302-08MP 8-port 10/100 PoE Managed Switch w/Gig Links Max

  -

  SRW208MP-UK

  8-port 10/100 Ethernet Switch WebView, Maximum power PoE

  SRW208MP-K9-UK

  SF 302-08MP 8-port 10/100 PoE Managed Switch w/Gig Links Max

  -

  SRW208P

  8-port 10/100 with WebView and PoE

  SRW208P-K9-NA

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  SRW208P - TO THE

  8-port 10/100 Ethernet Switch with WebView and PoE

  SRW208P-K9 - TO THE

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW208P-EU

  8-port 10/100 Ethernet Switch with WebView and PoE

  SRW208P-K9-EU

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW208P-UK

  8-port 10/100 Ethernet Switch with WebView and PoE

  SRW208P-K9-UK

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW224G4-CN

  24-port 10/100 + 4 Gigabit ports, 2 Combo SFP switch WebView

  SRW224G4-K9-CN

  SF 300-24 24-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4 - TO THE

  48-Port 10/100 + 4 switch with WebView Gigabit ports

  SRW248G4-K9 - TO THE

  SF 300-48 48-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4-EU

  48-Port 10/100 + 4-port Gigabit, 2 Combo SFP switch WebView

  SRW248G4-K9-EU

  SF 300-48 48-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4-UK

  48-Port 10/100 + 4-port Gigabit, 2 Combo SFP switch WebView

  SRW248G4-K9-UK

  SF 300-48 48-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4P

  48-Port 10/100 + 4 switch with WebView and PoE Gigabit ports

  SRW248G4P-K9-NA

  SF 300 - 48P 48-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW248G4P - TO THE

  48-Port 10/100 + 4 switch with WebView and PoE Gigabit ports

  SRW248G4P-K9 - TO THE

  SF 300 - 48P 48-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW248G4P-UK

  48-Port 10/100 + 4 switch with WebView and PoE Gigabit ports

  SRW248G4P-K9-UK

  SF 300 - 48P 48-port 10/100 PoE Managed Switch w/Gig rising

  -

  Order details on the 300 series check the following URL;

  http://www.Cisco.com/Cisco/Web/solutions/Small_Business/products/routers_switches/300_series_switches/index.HTML-tab-models

  Bob, please do not order the older SKU, but order the replacement SKU with a K9 in the p/n. These parts new or updated numbers also come with a substantial warranty, in order to check the datasheet for this information on the warranty.

  Best regards, Dave

• Start satellite C50-A-1-JM

  The history of my problem would be too long and tedious, I will simply say that I erased all (thanks KillDisk, it works very well ) my hard drive and now it is whiter than white! so I can not boot in any way: whenever I get the message "No disc bootable, change it and type any key to continue." (as if I could swap my hard drive from the laptop to the other!).
  It is likely that I destroyed a boot firmware I need to reinstall but which and how? ...
  If anyone can help me to restore my boot, I thank him (her) in advance.
  Sincerely, Michael.

  Sorry, no help, but I don't have one of those less than 2 years, and after the last update of Tempro "ready for windows 10" it has become very slow, after stopping it just entered a 'repair auto/recovery cycle' on every reboot no matter how long it has been left in the market or off between reboots.
  Before you take a hammer to it (I bought something else) I turned on it once more and finally he started to display the "no boot device - please reboot ' message. I tried to restart and each time after the "Toshiba leading innovation" screen it will 'check media' then ' no boot device - please reboot "-seems to be a common fault judging by the number of post about it on the web.
  Too bad that my old Toshiba Equium, although his age now, ran 24/7 almost all of 9 years with no problems cannot complain on that one.

• is windows 7 x 64 support MBR & GPT two partition types

  is windows 7 x 64 support MBR & GPT two partition types

  Hi Afonso

  It can be used as a boot volume on x 64 editions of Windows 7, Windows Vista and Windows Server 2008. From Windows Server 2003 SP1, GPT disks can also be used as a boot on Itanium-based systems volume.
  Note Windows only supports booting from a GPT disk on systems that contain startup packages Unified Extensible Firmware Interface (UEFI).

  Creation of GPT disks

  You can only convert empty, no disks partitioned (raw disks or empty MBR disks) in the GPT format. To convert a volume that contains the data, you must first manually remove the partition. You can use the following methods to create GPT disks:
  After you install a new disk, open the disk management console to start a wizard that allows you to configure the new drive. The wizard includes options to initialize the MBR or GPT disk.
  Initialize the disk later by using the option initialize the disk in the disk management console.
  Note starting with Windows Vista, you can install a Windows x 64 on a GPT disk operating system, only if the computer has UEFI boot firmware installed. However, the installation of a Windows x 64 on a GPT disk operating system is not supported on Windows XP. Try to do so gives an error.
  Readers convert GPT and MBR

  You can convert a format of partition in a different format. For more information, see the TechNet articles:

  • Transform a boot drive primary in a disc of Table of Partition GUID
  • Change a Table of Partition GUID drive on a main boot drive

• update from windows 7 to windows 8

  I did a Update Wizard and get a secure boot firmware cannot be used as my computer doesn't support I asked if it is really necessary to run windows 8, but not told me whether or not it is necessary

  No it's not.
   
  Is all there really is to protect your computer from potentially dangerous
  Bootups USB or CD/DVD. UEFI is not necessary for Windows 8.
   
   

• ESXi 5.1 / 5.5 u1, 2, 3 on HP BL460c G7 - CMTF

  Hello

  I am some of our old blades (bl460c G8 and G9 passed without a hitch) upgraded to esxi5.5, but the installer crashes.

  I tried every update of the 5.1 and 5.5 custom images HP, nothing helps.

  Installer seems to run, but group then, as soon as the network drivers load (this is what I concluded). I applied the latest Proliant (2015.10.0) service pack, so firmwares are as up-to-date as possible (interesting note: with firmware older 2011 host installed successfully, but the network was unusable)

  Some screens of 5.5u3 (hp cust):

  Here the installation program stops loading:

  

  And then he group:

  

  Any suggestion or any other resource, I might give a try (tried some vanilla, esxi ISO did not help)? I would really like the latter to join the main cluster, an upgrade of RAM and they could be running smoothly for a few years.

  That's what really happened:

  • The management of OA mutilated somehow update firmware, specifically the emulex driver, which made unusable and almost non-updatable
  • Only way to give the ANC emulex in a working state seems to be using the iso flash OneConnect (OneConnect-Flash - 4.9.311.20.iso) available here: http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=co_128972_1
  • Once back in operating condition, the last SPP (2015.10 at the moment) can be mounted with the remote console to perform the update.
  • Once done, and even with the latest firmware of Emulex v10.5.155.0, ESXi 5.5u3 HP works fine.

  A signal that the emulex firmware is corrupted is the boot firmware repeated message (which must appear only once):

  

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Good method to restore running, boot and Firmware for PowerConnect 6224 switch

  Hi all

  I have a switch PowerConnect 6224 of production that is configured exactly as I want.  I have a new PowerConnect 6224 switch I want to restore the config is possible?  My goal is to not have to manually enter settings for each single switch.

  I tried a few methods, but they do not seem to work.  If anyone can tell me the correct procedure or point me in the right direction would be great!

  Here's a document on some older switches which explains the process.

  www.Dell.com/.../app_note_12.pdf

  It is different for the 6248 somewhat, but the concept is still the same.

  Copy of the file Image of a server to Flash memory

  Use the command copy of the image - the url of the source to copy an image from a Flash memory server file, use the boot system command to activate the new image.

  Copy of a Configuration file from one server to the running Configuration

  Use the running-config command to copy the url of the source to load a configuration file to a network server for the device running configuration. The configuration is added to the running configuration, as if the commands were typed in the command line interface (CLI). The resulting configuration file is the combination of the running configuration and the loaded configuration file, with the configuration file with priority.

  Copy of a Configuration file from one server to the Startup Configuration

  Use the command copy startup-config - the url of the source to copy a configuration of a network server file in the startup of the device configuration. These commands replace the configuration file starting with the copied configuration file.

  Store the Configuration of starting or running on a server

  Use the command copy running-config destination url to copy the current configuration file to a network server by using TFTP. Use the copy destination-url startupconfig command to copy the configuration file to start on a network server. The copy of the configuration file can be used as a backup copy.

  firmware download also includes step by step instructions on how to upgrade the firmware.

  www.Dell.com/.../drivers

• Firmware 1.4.0.88 for SG300-52 seems to break DHCP relay

  My VLAN to end my switches, so I use a DHCP relay with Option82 to distribute addresses for the subnet of the VIRTUAL LAN. After the transition from 1.3.7.18 to 1.4.0.88, DHCP isn't being delivered on my VLAN. Does anyone else have this problem?

  I'm just creating DHCP relay for the first time with my SG 300-28, 1.4.0.88 firmware and noticed that the DHCPDISCOVER promulgated by the relay had the same source and destination (67) port, while the original DHCPDISCOVER used 67 & 68. In addition the 1.3.7.18 firmware is not exchange these autour:

  Excerpts from Wireshark:

  1.4.088-

  Original DHCPDISCOVER to the customer:

  User Datagram Protocol, Src Port: bootpc (68), Dst Port: bootps (67)

  Relayed SG300 DHCPDISCOVER:

  User Datagram Protocol, Src Port: bootps (67), Dst Port: bootps (67)

  This seems a bit suspect to me

  1.3.7.18

  Original DHCPDISCOVER to the customer:

  User Datagram Protocol, Src Port: bootpc (68), Dst Port: bootps (67)

  Relayed SG300 DHCPDISCOVER:

  User Datagram Protocol, Src Port: bootpc (68), Dst Port: bootps (67)

  I am not sure that this is your problem (it does not solve my problem), but I want to underline the thought