boot from dvd with wireless keyboard

Similar Questions

• Can't boot from DVD

  Hello

  I had Sleekbook HP 14-b182tx. I want to install windows, but I could not boot from DVD and I already defined start-up of the DVD to start frist but I can't yet start of DVD. Anyone know the solution? Tell me please!

  a plus, even I have 8 GB of RAM, Core i5 750 HDD but I couldn't install win7 64 bit. I'm so stress! Please help me!

  See you soon,.

  Hello

  You can try this option below.

  (1) once the unit is power on keep pressing the F9 key and select the CD/DVD drive and then once you press any key the Enter button click, makes do check.

  (2) with the disk inserted in the drive once the unit is on Keep tapping select button ESC F9 from there, once you press a key, makes click on the button enter.

• Boot from SAN with 4 HBAs

  Hello

  What are the guildlines for boot from SAN with 4 fibre HBA.
  Our HP Blades originally had 2 available Qlogic host bus adapters.  I have always chosen a boot on both device and the servers never had a problem starting.  Recently we add a second back-end connectivity map and associates of mezzanine on the HP to allow everything.  On the SAN and blade we show 4 HBAs.  Now when booting of servers, we have stuck in the bootloader GRUB.  This has happened on a server that has already been built and when we reinstalled.  What are the guidelines for booting from the San with multiple HBAs.  We use ESX 4.1.

  Hello

  The general rule is that boot from SAN works on HBA cards in the lowest PCI slot.

  I don't know what rules HP uses to translate slots PCI mezzanine cards.

• Failed to install. "Press the key to boot from CD", but the keyboard is disabled.

  I'm trying to reformat my computer, but no luck. When I boot with my Windows 7 disc in the CD drive, it goes to the black screen that says press any key to boot from the CD-ROM. well, it works a lot better if she didn't disable my keyboard when he did this. The world how this work?

  (1) use the full format the disk of 1 TB of Seagate (connected to your old PC) and then from a command prompt type: chkdsk /f /r should no errors reported by chkdsk on a disk renovated. If there is post back.

  (2) some Blue Ray players have problems playing media Windows 7 installation DVD, if you have a player of standard DVD try to use it to install Windows 7 on the Seagate drive you formattewd to #1 above step.

  (3) set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use any automatic overclocking BIOS features and then falling back to the speed of stock as a starting point.

  First try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/

  If you have a copy of Windows XP around try install temporary (if it is not Windows 7 will work as well)
  'No need to activate you get a grace period of 30 days that is perfect for the tests'
  then use the following tools (which implies that the memtest shows no failure)

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor. For overclockers using stock radiator and cooling fan Intel/AMD you can expect a temperature of 35 to 40 at idle and up to 60 ° C 65 ° C when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ):
  Displays the clock speed of the CPU under various conditions of loading (if you use speed step technology Intel EIST). Also two tabs (memory and SPD) that shows the actual speed of the memory and 'SPD' tab displays the nominal speeds for each location of memory which is filled.
  http://www.CPUID.com/cpuz.php

  CPUID HWMonitor is a program that reads the sensors key health systems PC hardware monitoring: voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  HD Tune:
  Provides information of the car and has an option to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a disk online health analysis feature
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, but also some tests more. He is able to identify a large scale of system components and supports the latest technologies and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Some of the features and functions include: resize and move partitions, Partition recovery after an accidental deletion, Create partition, Delete partition, format partition, convert partition, partition Explore, Hide partition, change the drive letter, the active value partition.

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing, restoring, or diagnostic almost any computer problem. Our goal is to be the most complete and easy to use computer free diagnostic tool. Almost all software included in UBCD4Win are freeware utilities for Windows®. The tools included are exemplary "free for personal use" so that users must respect these licenses. Some of the tools included in UBCD4Win are paid and a property of UBCD4win software license.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Portege Z830 - can't boot from DVD

  I have a Portege Z830-11F. I upgraded my machine to Windows 8 and but I didn't like it. So I decided to do a clean install of Windows 7.

  I downloaded the file .iso on the internet and it was engraved on a DVD.
  I plugged in my external DVD drive, rebooted, entered in the BIOS and changed the boot order and restarted again.

  Everything went well and I was able to install Windows 7.
  But I didn't have the drivers, (thought the BONE would recognise the driver LAN at least, I was wrong)
  So I've upgraded to Windows 8 again (without restarting) just to download the drivers for Windows 7.

  I did, but now I can't boot from the DVD.
  When I enter the boot order section, sometimes the DVD is listed, sometimes not.

  In both cases, the machine starts with Windows 8 straightly, does not allow me to boot from the DVD.
  The strange thing is that I was able to start on the same DVD in the first place.

  What can I do to start from the DVD?

  At first, I must say that I n t understand why you didn't create recovery media before you changed something. Using preinstalled Toshiba recovery media creator you can create USB recovery and the whole situation would be not so complicated. This recovery image is activated but now if you install own OS version you will not be able to use the product key you got with your laptop.

  Anyway, now proceed to a complete stop Win8 and after having this beginning for laptop and use F12 to get into the boot menu. Of course your external DVD must be connected before starting your laptop. It may be that external drive is allowed on the like on my U940 USB boot option.

• Qosmio F30-140 - can't boot from DVD player

  Dear,

  I faced the problem of DVD player, I can't boot from it... in fact, he didn't see and CD or DVD when I insert it...
  So how can start from reinstalling windows? Or how can I use external USB DVD to boot from it?

  I F30 - 140, with BIOS updated...

  Please help neeeeeeed...

  Hello

  It seems that the CD/DVD drive has developed a hardware problem.
  Normally you should be able to boor to ODD in pressing the C key immediately after the laptop has been powered.
  Alternatively, you can press F12 at the beginning. This would allow the start on-screen menu.
  Here you can choose ODD as a source of start-up

  If this will not work, then the STRANGE might be vice.

  PS: I doubt that the BIOS supports CD/DVD USB drive startup...

• Problem with wireless keyboard with Smart TV 32RL958

  I connected the mouse Microsoft Wireless Desktop 800 & keyboard with the transmitter/receiver in USB2.
  The mouse works fine. Keyboard does not work properly.

  When I click in the box with the mouse, the keyboard screen on appears.
  I can clearly only by clicking on the 'X' and you can then type using the wireless keyboard.
  Whenever I type 'Enter' on screen keyboard on still appears and I have to do as shown above. to the next field, I want to enter information in.

  Also, when I try to log in to sites the userid and password are ignored.
  I get no error message, return to the login screen.

  One of my friends has the same TV model and we have connected the keyboard and mouse to the USB 1 port USB 2 port.
  Logitech keyboard and mouse work perfectly.
  OK, the Web browser needs a little bit to load the page, but both devices work as it should.

  I could connect to my main account from google and the internal keyboard did not appear on the screen ENTER same key s external keyboard

  Seems that your keyboard is not fully compatible

• Trying to set the BIOS to boot from CD with Acronis HD clone software

  Want to 700-056.  16 GB of Ram.  Qurdro graphic K600.

  I just installed a 240 gb SSD, Kingston.

  To move the operating system (8.1), I need to boot from a DVD with Acronis program.

  Under the legacy in BIOS, Acronis is displayed.  I move under the legacy, but the computer still starts on C:.

  Where can I find detailed information about the BIOS and how to boot from the DVD?

  Jim Holmes

  Your welcome!

• Lenovo V580c HARD drive is dead, can't boot from DVD or other medium

  We have computer laptop lenovo V580c whose HARD drive died - he was already 2 times lol refubrished and it died again. It has Windows preinstalled 8/8.1 and we have upgraded to Windows 10 recently. But as the HARD drive is dead, we need to reinstall the system on the new drive (we of this msata ssd). In any case, I tried to start Notepad with DVD with burned ISO of Windows 10 clean image, but the laptop won't boot from the DVD all of a sudden. No change in the BIOS could help solve - laptop everything simply does not recognize any drive now. He goes through all the boot options and stopped at the initialization of the network which we have not. And then, we see just a small windows with the boot option that do not in any way. Here are some photos: http://imgur.com/a/6R185 http://imgur.com/a/112HY http://imgur.com/a/K1k8Q I have tried BIOS posible lall lifestyles, responsible security settings, used UEFI/legacy/the two, disabled/enabled secure boot. Nothing helps and the laptop is literally unusable now because it's not accept any storage/disk to start. I even tried to remove any startup as HARD drive unit, DVD and new msata I tested before. Computer laptop while still not trying to boot. Of course, it is out of warranty now. What can I do to fix it and make acept to boot from the DVD again? I don't want perair service because it wil cost us money. This product should work in the first place. We had so many bad experience with lenovo with this laptop that I won't buy another their product more.

  If you have a usb key 4 GB you might try to put 10 on which windows and the installation of it, if you do not have a cd key for windows 10 installation I think also there is an option to skip this part that your pc should already be activated with microsoft

  just looked at picture are you sure the dvd that you have done is a bootable

  https://www.Microsoft.com/en-GB/software-download/Windows10
  Download the tool, and then select the same ISO Windows 10 you had it IE home not pro or vice versa

  http://wudt.codeplex.com/
  ISO tool usb

  https://www.Microsoft.com/en-GB/download/Windows-USB-DVD-download-tool
  the use of the iso to usb tool

  I hope that this helps out you

• Can't boot from DVD on HP Pavilion dv9600

  I'm trying to start Fedora 20.1 leave a DVD that contains an ISO image of Fedora 2.01. The BIOS recognizes the CD during the POST and apparently also in the beginning stages of start-up, since I can see the drive activity light and hear leaders seeking. However, Fedora does not start and finally Windows Vista starts normally.

  The drive is set to be the first choice in the boot device sequence.

  What must I do to boot from the ISO of Fedora image?

  Thank you!

  HP Pavilion dv9600 refers to nearly 200 different computer models of HP.

  When you request support, please provide the name number and produces complete model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please try these two things for me and report back with your findings.

  (1) insert a bootable CD well known and/or DVD into the computer and try to boot from it.

  (2) Insert the 2.01 Fedora disc in another computer to verify that the drive is actually bootable.

  These tests should indicate whether the problem is a hardware or software problem.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• How can I change my mobile mode 'sleep and/or standbay' with wireless keyboard Microsoft model 3000

  Original title: I just bought Microsofts model 3000 wireless keyboard

  I can't find a function key that I can spend my laptop mode 'sleep and/or standbay '. How can I make this wiith this probuct?

  Hello smilingron,

  You have a sleep button separated from the keyboard that you can use to put the computer to sleep. You can consult the manual that came with the keyboard gives you will help you to find the right key.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Can't boot from DVD or CD

  Hi all...  I have a W700, Type: 2758.

  I have my formatted disks and I want to reinstall the o/s.  When I turn on the machine with a disc, the message I get is "Device not found" or "No valid operating system".

  1. my boot order has "ATAPI CD0: model HL - DT - STDVDRAM GT33n-(TS)" as the FIRST device.  This unit has "No valid operating system" written next to it.

  2. I have two drives, that I am trying to boot from.  The first is a Windows 7 boot disk and then the BIOS CD that I got on the Lenovo site.  My results are the same regardless of which disc is in the DVD player.

  3. I swapped DVD drive with a co-worker to ensure that it works correctly.  The DVD player works in fact.

  4. I checked the two disks on my other PC and I have no problem to read.

  Any ideas?

  Thank you!

  Never mind... I got a hold of a DVD USB, taaa daaaa, it sees the drive instantly.

  While I am still completely confused on why I can't boot from the built-in DVD, I at least can I install the o/s now.  (Again, I've even changed embedded... DVD)

  Well...

  Have a great day everyone...

• Can't boot from DVD or USB! Windows 8

  It then it really starts to bug me! I tried to solve this problem for a few hours now, and this is absolutely not the case! So I want to do a clean install of Windows 8. I did all the steps to get it on a dvd and a bootable USB.  That was the easy part.  At first I tried to boot into DVD, I went to the Bios and the value of the first boot priority CD/DVD. After that and several reboots I get nothing! I went into F12 and it said to start from the hard drive. Good if it does not work. I go to copy the Windows 8 ISO on a USB key. Good in fact, it was easy, I can go into the Bios again and don't see an option for USB FLASH directly, but see other options start USB, such as USB, FLOPPY USB, DVD, AND USB HARD DRIVE. I first select USB DVD, after several reboot nothing! Went to F12 (boot options) and still nothing! Then, I chose USB HARD DRIVE, exactly the same thing! So now I am on my knees and gave up! I ask for help in my community and I hope that you guys can understand this.

  I just bought the computer 3 weeks ago its a new Aurora R4. I don't know whether it is a hardware problem, it seems. I tried to boot from the CD/DVD with the re - install OS AlienWare gave me and it read perfectly. So if it fills up it should work right? Then I tried several blank DVDs and even went out and bought some new! Still nothing! Ahhh, sorry it's really bugging me. Something so simple, but I'm so lost.

  Thanks for any help from friends!

  Dave, :)

  Press f2 to enter setup, disable the option "password at startup" and to record changes... now boot... you're done. Thank you

• Cannot switch the language layout with wireless keyboard

  I do a sort of a media center for my mac mini. So far, everything is great, except for one very annoying thing. I bought this wireless keyboard and it's working great, although there is a problem with the layout language switch. When I change the input language - it is off, according to the change of language icon, if a text input is always in English. I'm quite confused and don't know if it's related to the keyboard itself or it's a question of OS (same behavior was on yosemite, before I've upgraded to el capitan)

  Any help is greatly appreciated!

  Are you talking about the little flag in the menu bar? This has nothing to do with the language itself, it has to do with keyboard layouts. Any reason you need to switch the layouts?

  If you want to change the language of the menus and other system, then you must go to

  System-> region and language preferences, then change the order of the languages.

• Want to 700-230: how to access the BIOS on machine with wireless keyboard and no keyboard on the PC port

  Hi all

  I have a HP Envy 700-230 which has a wireless keyboard

  How am I supposed to access the BIOS that the keyboard drivers are not loaded until after the machine and there is no normal keyboard connects on this PC for a wired keyboard

  With this kind of computor how am supposed to access the BIOS

  Obviously to start the reports a keyboard error and suggest I press ESC to access the BIOS that I can't because at startup, there is no current keyboard.

  Thanks for any help on this.

  Jeanette

  While not a definitive answer, but try a wired USB keyboard instead wireless.  There may be a setting in the BIOS to change the way the keyboard interacts at the start but, of course, you need to enter the BIOS.  Looking at the other comments on this issue, if you happen to have a keyboard PS/2 and a PS/2 to USB adapter, then this seems to be a better choice.  Plug the PS/2 on the PS/2 keyboard to USB adapter and then try that at startup to access the BIOS.  Then, find the setting to allow the keyboard to be recognized at startup.  Another solution is to move the USB port, the wireless keyboard use.  If the rear ports, move forward, if forward move backward.

  Let me know if one of these help.