Boot from the CD/DVD drive

Similar Questions

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• Satellite A200-12s - not boot from the CD/DVD drive

  Hello

  My Satellite A200-12 s does not start on CDDVD. It is well recognized in the bios. In the trunk is first CDDVD. Under Windows, it works perfectly.

  Thank you for your help
  Thanks to Google translation.

  BIOS Version 2.60 64bits

  Hi michel_91,

  If the drive works properly in Windows, it seems to be related to your startup disk. I put t know which drive you are trying to boot from, but you should try another. Maybe it s scratched or something else in order to test another.

  Check this box!

• Boot from the cd/dvd internal

  Hello, I have a hp d035-dx that will not boot from cd/dvd drive. Please advice. The startup option, there is no option to boot from the cd/dvd drive

  Hello

  You may need to disable Secure Boot - see the guide on the following link.  While in Boot Options, you also need to enable material.

  http://support.HP.com/us-en/document/c03736054

  Kind regards

  DP - K

• ENVY of HP dv6-7246us SSD Upgrade, problem Windows 7 installation with boot from a usb/dvd drive.

  Hi all

  I recently bought the dv6-7246us and have updated for one SSD HARD drive. The problem I have now is I can't boot from usb or dvd drive that contains the Windows 7installation. Initially, this laptop has a HDD with Windows 8. I changed the boot order to boot from the USB drive and the CD-ROM/DVD-ROM drive several times and have still no chance to start to the top of the installation. Is there a solution to this problem?

  Thank you

  Robert

  Hi, Robert:

  Go you into the BIOS and change in legacy Mode?

  I think that you need to do in order to boot from another device other than the hard drive.

• Re: Satellite C650D-12J refuses to boot from the recovery DVD

  Hello

  I have a Toshiba Satellite C650D-12J which has recently been ravaged by a virus and now refuses to start. Whenever he tries to boot into Windows, it restarts and blue screens.

  I ordered the Toshiba recovery media as the most simple solution is to recover the laptop and restore the default settings.

  However, when I insert the recovery DVD and choose to boot from the CD/DVD get them all is a loading bar that turns to a black screen with the white cursor. It's her!

  Can anyone suggest a solution?

  Kind regards

  Chris

  Hi MrChris,

  You have the same problem if you try to reinstall Microsoft Windows or just Toshiba Recovery disk?

• SA30-414 boot from the floppy USB drive

  Hi all!

  I'm tryin to get my my satellite A30-414 to boot from the floppy USB drive and enter the dos mode, but all I get is a black screen (without a slider, of course!), and then the windows XP login page directly. Can you tell me if this model has a boot device menu shortcut keyboard?

  Also, I may be permanently changed some configurations of starting (to know by pressing F12 at startup, then press F2 to try later) with my attempts to get the machine to boot from the floppy drive: now even when the floppy drive is not connected, I get this black screen awkward and then, after a few seconds, the logon windows page. How do I access the Setup menu and check?

  Thank you in advance for your help!

  Hello

  You can access the start menu by pressing the F2 key during the boot process. This will take you in the "setup" menu where you can change the order of selection of boot device as well as the other BIOS settings permanently.

  Kind regards

• I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.

  I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.  I'm getting "can't open the application 'Install' because it may be damaged or incomplete."  The drive is new and I have installed and registered on the iMac smoothly with Adobe. There is no sign of physical damage to the disk.  I did previously with Elements 9 without problem.  Any suggestions please?

  Try to download the installation files instead of using the drive.

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

• Portege R100 - boot from the external HARD drive

  I have a Portege R100 and the HARD drive has failed. I installed a new HARD drive and I have the Toshiba recovery disks. I tried to boot from a generic USB CD-ROM but the laptop did not recognize.

  I have a disk of Toshiba USB drive it does not recognize and I have a restore disc but I don't know how from there. Do I have to buy a CD external Toshiba and if so, which?
  Any useful suggestions?

  Hello

  Boot from the external USB CD/DVD drive is not possible.
  You will also be able to boot from USB HDD!

  If you want to boot from the CD, you must use a compatible PCMCIA cards (16-bit and 32-bit Cardbus) CD/DVD drive.

  For more information, see this article from Toshiba:
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  and this other thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=97343𗰿
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8991&MessageID=31246

  Good bye

• No option to boot from the CD/DVD-ROM in the BIOS

  Hi all

  I was pleased to receive my computer H8-1485EA this week!

  I entered the BIOS setup by (by pressing F10) to allow booting from a device of type CD. I changed the boot order so that my DVD SATA drive was the head of the list. When I tried to boot from a CD, I got a starting message startup security protection has been activated and prevented me to boot from the CD. I entered the BIOS again and disabled security start-up (by entering a code) and booted from the CD. Unfortunately the I was booting from a disk to answer stopped, so I ejected it.

  Some time later, I decided to reactivate security startup in the BIOS. I did it successfully, however, my SATA DVD drive has disappeared from my list of boot device. It is still detected by the BIOS and will appear in the Windows Device Manager. It is also absent from the startup list when I press F9 to start.

  All the tips are greatly appreciated. Thank you.

  This may not apply to your case, but here goes: I about went crazy looking for the (HP Envy Phoenix) option in the UEFI BIOS to boot from my Blueray disc. I tried to put the Blueray disc to start first in the boot order, but I couldn't find that he listed in the BIOS. (My computer is 2 days old, straight from the factory. Reads Blueray disc under the operating system very well). Turns out I had to insert a floppy in the Blueray to energize, then restart the computer, then go into the BIOS and - magically - BIOS now showed my Blueray and I was able to boot from it.  (In the past I have configured all my computer equipment statically in the BIOS and it al showed there and he was.) I had never seen one * new * material option appears in the BIOS that did not previously exist. That is until I met the Phoenix BIOS)

  HardAsNails

• How can I configure my computer to boot from the CD Rom drive

  I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

  Gayle

  Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• 3490CT: is is possible to boot from the CD USB drive?

  While I read in this forum that it is not possible to start a ct 3049 since an external USB CD drive, I read elsewhere on the web (I can find is no longer the link) it is possible to boot from a USB CD drive as long as it's an Iomega brand player.

  Can anyone confirm on deny for me please?

  Hello

  You can boot from the external USB CD drive, but you need a supported drive.
  Please also check this topic on the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=944&MessageID=2086#2086

  Good bye

• Can I set up my HP dv7-4165dx to boot from the second hard drive?

  I got a HP dv7-4165dx for about 20 months now. Ten months in the original hard drive burned due to setting up directly under the GPU (lower left corner, to the left of the touchpad and under the keys), which gets quite hot on the top to make your uncomfortable hand. Symptoms include blue screens, troubled during start-ups, as well as a message from the system at boot that said the car was damaged. As it was under warranty, I brought it to Best Buy to get the drive replaced, which took about 2.5 months.

  Now, about 20 months, I face at the beginning of the exact same symptoms. I noticed that there was a second HDD Bay, away from the GPU, so I bought the yarn necessary to the use of this Bay. Now, he tells me that there is no installed boot drive (the hard drive test in the system diagnostics, knows that it is there). I'm sure that I can swap the drive towards the original Bay and be fine but that puts me $ 75 for the HP kit (Yes, I know I might have to eat that, if there is no way), but much more importantly, this means that I will have an another burned (losing everything, even once) by car a month or two.

  I looked, but I can't seem to find a way to tell it boot from that drive. Is it possible, or am I just out of the eye due to bad design? It has been a great machine, except for this problem.

  Hello

  Unfortunately there is no option to boot from the HARD drive in the 2nd Bay in one of the series dv7 - sorry for the bad news.

  Best regards

  DP - K

• Press any key to boot from the Cd/DVD, I can't press USB keyboard.

  The keyboard is usb and is placed into the usb port connected to the phones, I want to install windows 8.1 but I can't start from the Cd/Dvd cuz of this problem. Don't tell me to try another port, I have tried everything. All solutions?

  Nothing but its good lol, but I discovered that I should get A PS2 Keyboard nvm