Boot from the DVD drive on a compaq evo N610C

Similar Questions

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Cannot configure the Laptop Inspiron 15 5559 to boot from the DVD drive

  I have a new laptop Inspiron 15 5559 .  There seems to be no way to configure the BIOS to boot from a repair disc to win 10.  After an accident on my old laptop, I know how it is important to be able to restore a disk image of my external backup.

  Help please because I do not see how to get the player optical, listed in the boot order.  It doesn't seem to be any mention of it.

  the bios is probably corrupted also not hostile user. try Googling a tutorial of bios dell for the setting of parameters for 5559. Lucky, you're not going to find one. It's not even a decent manual. the user must download the recovery files that must be installed on the hard drive before l/p of the plant leaves. the Bios is archaic and most of the time does not meet the evolution of the legacy in the uefi. you could try to update the bios, but I doubt that you will succeed even after doin so. call the tech and have them try. I did and they screwed up my 5559 and they had me reinstall the recovery of a usb drive, they sent. It helps took 5 hours to install. then another 3 hours of updates. and the 5559 still does not work properly. Maybe I got a lemon. However the subject requested, and every time I called dell every question I asked I was put on hold. what say you. He offered dell technicians, although very courteous do not know and don't have to put you on hold the Conference with other technicians or find which could help. Sorry to be critical but after over the hours on the phone most of the time on hold dell tech dept is not up to snuff.

• Satellite Pro A120 - cannot boot from CD/DVD drive

  I have a Toshiba Satellite Pro A120 of friends, he was running very slow so I said I'd do the usual for him.
  Back up all his documents, and then reinstall windows. not so easy!

  First of all, try to boot from the CD so I can boot into Ubuntu or reinstall windows.
  Me has taken long enough to work, I had to press DEL/ESC to enter in the BIOS, but once I put to boot from the CD (and was a bootable CD in the drive), it kept just boot from the HARD drive.

  From time to time I get an error saying + "Media test failure - check cable" + or something similar, theres a lot on internet on this subject.
  I think its something to do if the boot order has CD first, then it has LAN as 2nd.

  Able to boot Ubuntu from a USB key.
  Try to copy its documents on my external drive but really copying REALLY slow (like 1 MB/s) and kept getting IO errors on some files.
  I can't run diagnostic software for HARD drive that I can not boot from the CD (could get the Ultimate Boot CD on a USB but if anyone thinks it would help?).

  In windows, the CD player only reads real CD (audio similar DVD, not CDR and DVDR).
  This means a failing drive?
  What intrigues me most, however, is that I changed the portable CD player with a CD of work of another computer and windows recognize today this new CD player at all!

  By putting a bootable CD in this new CD player, it always starts from the HARD drive (do not recognize CD player in all).
  The BIOS is a bit unnecessary and does not show the detected disks...

  Also, boot Ubuntu from a USB key, with the original CD player, he reads real CD and DVD copied of all zeros are considered blank discs and replace the CD drive with a known working in Ubuntu means its not recognized at all (if this isn't windows driver problems).

  When I started messing around with it I remember windows say the time had been reset, so I set the time properly, then he did the same thing again I think. A flat CMOS battery could not be responsible for this?

  Is the motherboard and specifically the IDE controller or a broken ports, or am I doing something stupid? I'm tempted to just install Ubuntu by USB and tell him not to bother with CD more ;^)

  Any suggestions or comments would be much appreciated!

  Thank you
  Dan Gent

  > Me has taken long enough to work, I had to press DEL/ESC to enter in the BIOS, but once I put to boot from the CD (and was a bootable CD in the drive), it kept just boot from the HARD drive.
  You see the CD/DVD drive in BIOS? I mean all the details like the name WEIRD etc.
  If this isn't the case, then it means that your CD/DVD drive is not recognized by the BIOS due to a hardware problem.

  If you can see the STRANGE in the BIOS but are still not able to boot from any disk, then I suppose that the CD/DVD drive cannot read the disk for different reasons.
  One of the reasons could be a defective or damage the laser lens

  > Every so often, I would get an error saying "Media test failure - check cable" or something similar, theres a lot on internet on this subject. I think its something to do if the boot order has CD first, then it has LAN as 2nd.

  Yes, this error means that your laptop tried to boot from LAN

  > In windows, the CD player only reads real CD (audio similar DVD, not CDR and DVDR). This means a failing drive?

  As I said above, it would be possible that the reader s laser lens malfunctions and, therefore, the ODD can't handle the media. It seems that the laser lens can not calibrate properly and can not move in the correct position. This question is not repairable and the drive needs to be replaced.

  > What intrigues me most, however, is that I changed the CD drive with a CD of work of another laptop and windows don't recognize this new CD player at all!

  The fact is that not all CD/DVD drives are compatible due to different master/slave/C-salt settings. You must use the supported players! In most cases, you can find a list in your user manual what CD/DVD readers are compatible.

• Cannot install the boot from the DVD - OEM of Windows 7 (full)

  Generally, I am able to reset the priority of readers, so a computer will boot from a DVD.  It's my first time on Win7 and I can't make it work.  Insert the disc in Windows (XP currently installed - 'not real') indicates the drive is not compatible with this version of Windows.  I thought that booting from the DVD would help, but I'm prompted to "press any key to boot from the CD/DVD" and every time he ignores me and goes backward to boot from the XP/hard drive.

  At this point, I tried to affect the CD/DVD drive that all the priorities, not only the first condition.  I tried to use the other DVD player because there is another - still no luck.  Isn't this updated software in place to work this way?  It should be bootable, no?

  Thanks for any help...

  Here's a question I would ask. Your computer is 64-bit compatible? If it isn't, it's probably one of the reasons why you would receive this error message. Please run the Windows Upgrade Advisor to see if your computer is ready for 64-bit.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• Tecra M2 - boot from the USB drive

  Hello
  Why Tecra M2 didn't boot from the USB drive in the BIOS?
  Is posible put in place this function in the new BIOS.

  Good bye

  Hello

  Good questions for Toshiba engineers.
  I don't think there is anything you can do about it. :(

• Boot from the 2nd drive HARD modular bay adapter (satellite P20)

  Hello

  I have a SP20-102 and I replaced the stock model with a 120 GB Seagate HDD and moved the original disc in a Module Bay HDD adapter.

  Is it possible to configure things so I can choose which HARD drive to boot from at the start, i.e. it is by default on the internal HARD drive but I can't choose to boot from the HARD drive in the modular Bay?

  I tried pressing F12 to boot device selection screen, but am unable to choose the 2nd HARD drive.

  Any ideas?

  R.

  Hello Robin

  As far as I know that it is not possible to boot from the external HARD drive. It is not supported.

  Good bye

• Satellite 5100 503: unable to boot from the CD drive

  Hey all,.

  I have a HUGE problem with my 5100-503 Satellite.

  Windows XP connects and then it disconnects right away.

  I found a fix for this at: [url] http://www.mcse.ms/message616432.html {/ url}

  The problem is that I can not boot from a cd, because the BIOS is configured to boot from the hard drive first.

  I get into the BIOS. I read on a few websites on the net than on machines 5xxx Satellite, you can only enter the bios through windows! ..., BUT windows does not work so I can't enter the bios. I can't even use the Windows installation CD when I boot, because once again the HD is set to boot first.

  When I press ESC while turning on the laptop and then press F1, I have the option load default BIOS values. I did, but the HD is still set to start first!

  What I can do... I can't reinstall windows or get into regedit to fix the paper / log problem!

  Help!

  Hi Jamie,

  Normally, you can select a boot device selection menu when you turn on your laptop. You can do this by holding down the F12 key when you turn on. Hold it down until the phone beeps or the device selection menu appears.

  If this does not work then you can try the shortened Toshiba habit that is to hold the 'C' button in the power that would then cause the laptop to boot from the CD drive. Of course, there must be a bootable CD inserted first.

  Kind regards

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com

• Computer tries to boot from the external drive

  I use a desktop computer with Windows 7.  I have an external hard drive connected as a backup drive.

  While booting, the computer tries to boot from the external drive and nothing happens.

  In order to get the machine to start, I have to unplug the drive hard Ext., which is a waste of time.

  I would like to back up on the drive internally the computer c:

  Is there a way I can stop trying to boot from the external drive?

  At the start of the pc, open the BIOS, usually output tab, search (priority boot device), set C: 1st, 2nd or 3rd external

  Save and exit. Also, more need of HDs to put in shape before using it, most come in a "raw" State the mfg

• boot from the flash drive on a dimension 3000

  XPSP3, completely up to date, 3000 dell dimension

  I have booted from the flash drive once a long time ago and I have still now because my cd player is not good according to imgburn and dell did not buy, I looked. :)

  The only question about it in my search for this forum was 10 years ago, and the op had no satisfaction.

  I took action: drive startup laptop computer (dell), so that's good, will load files on the 3000 and then reach the point Windows starts up, and then I get a blue screen 07 b, any file in the list, just telling me to uninstall a driver or a controller, I have not installed one, :)

  any ideas?

  INSTALL full XP on USB flash as boot drive is not supported.

  Hirens is WINPE no full XP.  XP is not and is not supported as a boot USB and run all option.

  You need to do a real hard drive your boot drive.

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Can't boot from USB/dvd drive on Satellite Pro M10

  Hello

  the broken internal dvd drive, an external USB disk is used. Now I need to reinstall windows on a new hard drive. How can I boot from the external hard drive? (I don't have a floppy drive, but I can't find the right drivers)

  Thank you

  Luke

  Hello

  Don t you need all the drivers for this key USB — because the USB disk is a device integrated on your computer. This means that whenever you connect the diskette drive to your machine, the computer establishes that diskette as a cable internal disk and this is the reason why you won´t need all the drivers.

  It s already installed when you plug it in.

  See you soon

• Portege R100 boots from the HARD drive - lack of operating system

  Hello

  I have a Portege R100 which won't the HD boot, I get the message "missing operating system".
  I don't have a compatible CD or floppy, I just about 1.8 inches for the hd, it works and I also have norton ghost 2003 is installed in another computer (a toshiba satellite A45).

  I tried to recover the drive with the help of norton and the image of the Ghost in the recovery CD, but it keep asking for a password.

  I would like to know if there is a way to use the restore with norton CD and usb driver and password screen (or where I can get the password?).

  Thank you!

  What password do you mean?

  and what recovery CD do you use? The image on the Toshiba Recovery CD is locked and cannot be extracted.

  It turns out that you cannot start or install the OS on the USB key!
  You must boot from the CD/DVD compatible player that can be connected to the PC card slot.

• Cannot boot from the HARD drive in AHCI on Satellite C mode

  I tried to get this satellite working for these past two weeks. I think I've tried all of the suggestions I found on this forum and others.

  My problem: I can not boot from drive c: in AHCI, only in compatibility mode. I can boot from the D: (recovery partition) in AHCI mode. When the recovery is complete, and when it gets to the first reboot, try to boot from the system newly created on the C:, I return the compatibility mode.

  I replaced the drivers on the C: drive.

  I extracted the AHCI drivers and copied in the root of a USB bootable. I try to do a clean install of windows 7, I get to where it shows the partitions. He tells me that it can not load the system on any of the partitions, I the AHCI mode (if the mode is set to compatibility it will load the system in one partition).
  I select "load drivers" and select the driver in the root directory, it loads the driver and then reports that it can not load the system on any of the partitions.

  I'm puzzled. I acquired pilots everywhere, the last set of drivers I used to try to do a clean install, I have acquired the Canadian official Toshiba site.

  Does anyone have any suggestions?

  Concerning
  Boyde

  BTW, this is Windows 7, I'm trying to get back to.

  Can someone help me with this?

  Boyde