Boot Manager is missing or damaged.

Similar Questions

• Boot Manager is missing or damaged in Satellite A100-062, VISTA

  Toshiba Satellite A100-062
  M/N PSAANE-03G00DEN

  When trying to boot the laptop says bootmgr missing and he won t let me to do nothing, just a blank screen.

  I inserted the Vista disc and tried to reinstall but it still says root because the Boot Manager is missing and error code = 0 x 15 on startup repair.

  Can someone help me please and don't forget I'm a novice so will need an idiots guide.

  Thank you very much John

  Hello!

  Have you tried with the disk recovery Toshiba or a disk of Microsoft?
  If you want to reinstall Vista with Microsoft disc, you need SATA drivers.

  I m do not know what is the problem, but in your case, I would like to format the HARD drive. You can do this with the Microsoft disk or with special tools like the Drive Fitness Test (http://www.hitachigst.com/hdd/support/download.htm#DFT).

  Delete all partitions and then do a low level format. Then try again to install Windows.

  Give me a reason why this has happened.

  Good bye

• Re: Boot Manager is missing on the satellite A210-15Y with W Vista

  Hello world

  I have a serious problem with my laptop Satellite A210-15Y. For two weeks I bought it. Yesterday without warning, I had opened a window to Internet explore and all of a sudden, I got about 20 Windows IExplorer. I stopped it with the Task Manager and then I looked for the update that updates to Windows Vista.

  After I installed all the updates again, I received a black with a message as screen "Boot Manager is missing, press Ctrl + Alt + Delete to restart» Excuse me for my English. I can explain my problem better in German or French. Please help me.
  Best wishes
  Franky

  Hey Franky

  Can you start / restart your laptop properly?

• Satellite L750-1LC - Boot Manager is missing by using the recovery disk

  I bought a Toshiba satellite L750-1LC and I try to create the DVD 4 to save.

  On the first dvd that only he came an error reading twice, the other DVDs were ok.
  When I try to recover from the DVD the recovery process got stuck on the first dvd so I had to reboot and try again, but the same thing happened to it.

  After you restart the system it came a message that bootmnager is missing and windows and any other thing was gone.

  Is the promotion of "No. Matter What Guarantee" "covering this type of flaws?
  If so, what are the steps to qualify for this promotion?

  I said that I am a Romanian citizen and I have already implemented for promotion in the specified time interval.

  It seems that the first recovery disk is not created properly because you got an error message.
  As I understand your message, you have tried to boot from the first recovery disc (which was not correctly created in the past) and so the installation could not be completed successfully.

  Now, you cannot start the operating system, because the Boot Manager is missing and possibly the system is deleted also
  I see just one solution: order the new disk recovery from here and use it for the installation of the OS: http://backupmedia.toshiba.eu/landing.aspx

  PS: as far as I know that hardware issues are covered by the warranty, software issues not covered by the warranty

• Boot Manager is missing and the Messages from Stop blue screen.

  Hi Henry here, I lost my Windows Vista disk and I reformatted my hard drive to use my Windows XP. So I ordered a recovery Windows Vista Home Premium SP1 of HP Distribution Center System. When I try to install the recovery system. I get messages from stop and disk boot manager is missing. I have to buy a disc of Windows Vista all over again? or what I can do to fix this? Henry

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Need for a solution when the Boot Manager is missing.

  * Original title: startup

  need for a solution when the Boot Manager is missing

  Startup Repair,

  http://www.SevenForums.com/tutorials/681-startup-repair.html

• Boot Manager is missing so that install operating system pretty.

  Original title: Boot Manager missing.

  I use a Dell Inspiron 700 m family machine with Windows XP Edition as an OEM installation. I wanted to try a commercially available cloud operating system just for fun. I installed it on my assembled desktop PC and everything works great, and then I decided to install it on my laptop, that everything is OK until I restarted Windows to the end of the installation. The Boot Manager does not restart and started directly in the new operating system. I know that the windows installation is still on my laptop because I can see the files in the file browser in the other operating system. I know that this probably isn't the place to ask for another operating system, but they do not yet have answers. For your information, I'll give you the name of the operating system I installed and give you the address of the download page. I am out of Windows XP and the new operating system is unable to console me anyway.

  OS name: JoliOS
  Address:http://www.jolicloud.com/download

  Hi J Johny k.

  If you want to reinstall Windows XP, you can follow this link completely.

  
  Note: if you have important data in the drive, make a backup of the data in any external device, such as CD or DVD, flash drive, hard drive etc.

  How to install or upgrade to Windows XP

  Reference: Install, reinstall, or uninstall Windows

  The installation issue with the operating system of pretty, you contact the nice support for assistance.

  http://www.Jolicloud.com/support

  Hope the helps of information.

  Please post back and we do know.

• Error on new install on a slimline hp with stops pro home windows 7 to 19% and States of Boot Manager is missing

  install freash on a HP slimine with windows 7n already on it... i have already removed the two partiotions and a new and proceed to install windows 7 and it loads the first green check and the 2nd down it gets 19% and stops each time, but I can use this disk to install on another pc... someone can tell me if my harddrive rejecting... it froze and would do anything so I'll try to redo it. with a disk it says error boot Manager missing? Help, please!

  (1) Yes you can use it on another PC the installation process and activation never finished.

  (2) disconnect any device useless and drives (external or internal) and try again.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• How can I get a copy of Adobe Application Manager?  I can't update 13 items because I get a message telling me that the Manager is missing or damaged.

  How can I update the 13 items?  When I try I keep getting a message that says Adobe Application Manager is damaged or missing.

  I downloaded from the Adobe website and installed in this way. It worked this time. When I tried several times before it wouldn't let me install because it's only for the CC.  He now works in any case.  Thank you

• Boot Manager is missing (cause and solution)

  This is based on my experience

  cause: partition (usually c) system and repartioning deleting it. example you have 200 GB in the c drive and removing his score to a new partiton 2 or 100 GB and 100 GB and decreases its volume to get a new drive unallocated.

  real scenario: I was downgrading a vista to xp presario a945ee, I divided the 1st partition (where the original operating system was installed) in half by removing and making 2 new partitions. I didn't touch the recovery partition so that I can recover the original system. for some reasons that I decided to retrieve the laptop for itsfactory image and when I hit F11 I get the MANAGER of STARTUP IS MISSING error, none of the recovery disks have been created so im stuck.

  
  

  
  

  solution: use your recovery disks, if you or order a game if you don't have any of the recovery disks

  lesson learned: always create recovery discs before doing something on your computer, never destroy partitions.

  Click on the star to say thank you

  strong evidence to make that the active PR work

• Boot Manager is missing cannot perform a recovery

  Hello disk seagate for my D: / drive does not work I have no hard drive at all! also, I am unable to do a recovery, as I start no, option no idea how to solve this problem?

  Lisa x

  Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics to test your hard drive.

• Satellite C650 missing Boot Manager

  Turn on and boot manager of missing press alt Ctrl delete message appears.
  Tried pressing F9 anything coming and nothing on each of the keys regardless... then bleeping noise if you hold the keys down.

  Have you tried an old os Xp startup disk in the drive to see if anything would come to the top and can hear the drive works but nothing.

  Is there something I can do?

  Thank you

  Hello

  Looks like the Boot Manager is damaged
  You will need to install the new system :(

  Did you create a recovery disk in the past?
  Isn't it?

  In this case, you will need to order a:
  http://backupmedia.Toshiba.EU/landing.aspx

• I can't boot after installing the latest win xp updated system - missing or damaged/system32 hal.dll

  I have win xp and that you have installed the latest updates 7 system - now I can't start.

  I get the message:

  Windows didn't start because what follows is missing or corrupted /system32/hal.dll

  I don't have a CD system - which can do? everything I read said to alter, copy, etc., but since I cannot start, I can't do it all.

  Help me please, thanks

  XP trying to tell you that it cannot find the file.  It is extremely likely that the hal.dll file is really missing or damaged (XP just cannot find it).

  You should not have the Windows XP installation CD for this problem.

  It is very unlikely that the manufacturer will be able to you provide a XP installation CD, but contact them if you wish.

  What would you do if YOU were the manufacturer?  Communicate with yourself?

  The instructions in this link to replace the hal.dll file are bad, bad, bad.  If you follow them, you will need to replace the hal.dll file, but it will not be the correct hal.dll file.  There are 7 possible hal.dlls on the Windows XP CD, and check out the generic hal.dll file won't be one you need unless you run a virtual machine.  Clearly, the technical support engineers have never actually solved this problem.

  Notice that the thread is not marked as 'response' by the original poster, but by a moderator of the Forum after a period of 5 to 10 days of inactivity where some MSE posted a link to a few articles in the KB (this is how things work here).

  You should start by making a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r first just to be sure of the file system NTFS is not damaged.  Then see if you can start after that (maybe it won't).

  THEN, you must use the Recovery Console to rebuild your boot.ini file.  I would like to rename the file c:\boot.ini first then you don't rebuild on top of the afflicted (this part is missing from the article).

  I can't understand why Microsoft support engineers seem unable to display instructions to make a CD of bootable XP Recovery Console.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton and Spybot.
  AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Here's how to make a CD of bootable XP Recovery Console:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  If you still have the same problem (likely), then the value rebuild your file c:\boot.ini as article says here:
  http://support.Microsoft.com/kb/330184

• Missing Boot Manager and no disc

  We have windows vista and recently my husbands computer stopped working. It turns on and starts to load but then says missing Boot Manager. We got our computers through our College and don't have the startup disk or recovery disk. We do not know what to do. I know that this seems to be a common problem with an easy solution... IF you have the rcovery disc. SO my question is how do solve us our problem without the disc? Someone please help us. We need our computer for school. Thanks in advance.

  1. try to make a record of BootableRepair.

  2 borrow a good Vista DVD.

  3. get recovery in any case discs.

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  See you soon.

  Mick Murphy - Microsoft partner

• ADVENT 9115 recovery disk works do not (missing Boot Manager)

  Hi guys have a problem created a recovery disc on my laptop Advent 9115 via the Techguys application on the model to create the disc that came with the laptop PRE-INSTALLED. When I originally created the disc, it does not create it was the 3rd disc that actually created the disc with no errors.so when I tried to test and use the drive, it worked fine at first, but after you have reinstalled windows and begins to restart it gives the error message START MANAGER is missing... Any solution without seeking a new advent because its all through the techguys you buy media recovery for this and the control scheme does not work for me and it is 01:50 English book a min for phone... email response is not a great way to talk to them it's like an automated response message.

  You should contact the technical support http://www.adventcomputers.com/contact-us.php or http://www.adventspares.co.uk/ advent if it's ADVENT computers to the United Kingdom for assistance in their recovery process - it is them and not Microsoft.  Each manufacturer is different things and we don't have access to information in order to help in their recovery process.

  I'm sorry, we can not be more help, but we simply do not have information to do it correctly.  I'm afraid you need to discuss with the advent no matter how this process can be difficult.

  If it were a normal installation of Vista using a real disc for Installation of Vista, I recommend the following:

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (but I guess that this program is not about recovering didk you and so you probably can not try this):

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If the above doesn't work not or you do not have the disk, download and try to use EasyBCD http://neosmart.net/dl.php?id=1 to see if he can fix the startup problem.

  But the sad truth is that I don't know if procedures thisse will work with your recovery system (especially since it is not working properly).  You really need to talk to the advent of this problem and get them to help you solve it.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.