Boot Manager Windows fails error 0xc000041c

Similar Questions

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• Boot Manager Windows problem asit always starts with a selective startup under the Startup tab

  Whenever I start my laptop I get Windows boot manager options in which it highlights the option of windows 7 and I have to press Enter and continue with this option selected.

  I tried to change my boot options in msconfig, but once again the configuration back to selective Starup of Normal startup. Also I disabled some startup applications, but even changes are not get saved when I restart the system after changes. My touchpad no longer works between the two, and then it starts to work. My left and right keyboard arrows keys do not work.

  My change in normal startup is get back on selective startup.

  Please help me to solve these issues.

  Hello

  It is very possible that this is for the reason that you have corrupted files on your system. System File Checker will scan your system for the missing, corrupt or damaged files. In addition, it will try to correct them. If you have changed the important system files, System File Checker will be - make sure you make backups of them!

  How to run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  I would also recommend that you run the Startup Repair to the problems that Windows may be displayed when you start your computer.

  How to run the Startup Repair tool

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/Startup-Repair

  Thank you

  Legaede

• Boot Manager Windows keeps popping up

  Hello.

  Whenever I start my PC, Manager Windows guard start popping up and asks me to choose an operating system to start. But I only have one BONE, and it's Win7. Y at - it a solution please? Thank you.

  Hello

  Thanks for the reply with the status of the issue.

  First of all, I want to apologize for the late response.

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Startup Repair tool and check if it helps.

  Startup Repair: http://windows.microsoft.com/en-us/windows7/products/features/startup-repair

  Method 2:

  If the Startup Repair tool did not help, then try the steps in the following Microsoft Support article and check.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540/en-us

  Method 3:

  If the problem started recently, then run system restore and check if the problem persists.

  System Restore: http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Please respond with the status of the issue so that we can help solve the problem.

• Boot Manager Windows keeps giving me an error, and I can not boot vista now. : O

  Hey guys, I have more solutions for the time and thought that I have turned to a group instead of address on mine.

  When the problem started?

  This morning, so a few hours there.

  What have you tried to fix it?

  Restore Vista CD

  What is the error message (all)?

  Says, the file: \Windows\System32\Drivers\oduzt.sys
  Situation: 0xc0000225
  Info: Windows could not load a critical system driver is missing or corrupt

  I've never heard of this file...

  What was the last thing you did before the problem started?

  Tried to delete/remove virus and malware
  Malwarebytes
  used, Microsoft's malicious remover<-- from="" microsoft="">
  the Microsoft file was the last thing I used before that happened.
  literally on reboot has happened.

  What are your system specs?
  Vista sp1 home
  Laptop Gateway
  Guessing 32bits
  Model no: MA7
  Model mt6840
  I'll tell you more if I could pull up? I can access the recovery cd cmd there at - it a command that will show?

  Do you have a screenshot?
  a little... haha taken with a camera...

  

  Also I was wondering... is there a way I can run a partition to say windows XP and take all the files off your computer and save them.

  then if it comes down to it, I can just empty the computer and install vista?

  Start your system and start typing the first F8 options should be repair you computer, select it, press on enter. Press the OK button on the next screen. It will ask for a user name and password, type you're windows journal on credentials and after that click ok. No system recovery tools in quick order.

  Type cd c:\windows\system32\drivers command and her then press ENTER after typing the command del oduzt.sys
  and press ENTER. After that, restart the system

  If you do not repair you computer after F8 try to boot from the disk and under the install now screen you can click on the repair, you're computer and there steps are the same. Let me know what happens...

• Problem Boot of Windows 8 error: 0xc000000f

  My laptop Asus primer not.

  It gives me this message
  "Unable to start Windows. A recent hardware of software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc, and then restart the computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  Status: 0xc000000f
  Info: boot your PC Configuration data is missing or contains errors. »
  When I put the disc, it just goes back to the screen, then after a few minutes, the computer will restart and display the same message.

  Hello

  I suggest you try the method described in the following article:

  http://www.kapilarya.com/how-to-fix-error-0xc000000f-the-boot-selection-failed-because-a-required-device-is-inaccessible

  Hope this helps, good luck :)

• Boot Manager Windows couldn't start?

  I have an advent netbook that is not a hard drive. my laptop suddenly stops while I use it and when I turn it on it says that you cannot start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer. (I CAN'T DO THIS BECAUSE I HAVE NO DISC DRIVE IN MY NETBOOK)
  2. choose your language settings, and then click "next".
  3. click on repair your computer.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.
  I'm not a very experienced user and I don't have any idea what to do!
  any help? THIS IS URGENT.

  Hi Emma,

  ·         You have Windows XP or Windows Vista/7?

  Check to see if the following is useful.

  Method 1: Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration - Windows Vista/7

  How to start your computer by using last good known Windows XP Configuration

  Method 2: Note: Check if you have the repair your computer option in the advanced boot menu.

  If you do, perform a startup repair, check to see if it helps. (For Windows Vista/7 only)

  Startup Repair: frequently asked questions - Windows 7

  Startup Repair: frequently asked questions - Windows Vista

  Respond with more information so we can help you best.

• Windows Boot Manager - windows does not have charge as the HAL is missing

  What does that mean? What should I do to fix? I have no windows installation cd that I bought the laptop with all the software on it - it was a demo in Comet

  Hello

  I guess the \System32\Hal.dll is missing.
  This means that your windows operating system must be reinstalled.

  I put t know what laptop you have, but I think that the Toshiba Recovery Disk Creator was preinstalled on your laptop. This software creates recovery Toshiba DVD, that help you to reinstall the operating system. But now he s at the end you can not boot into the operating system.

  You can try this:
  Press F8, choose repair my computer, then select Toshiba HDD Recovery.
  Maybe this option is available.

  Otherwise will need you a Windows installation disc

• Windows Boot Manager failed error

  NB: I have a very short time. her tomorrow. I have a very glitchy w4 Iconia, who has been with us for a day and night, with several screen flickers and this problem I am submitting. Boot Manager Windows failed to start my iconia, which means I can't even swtich it took off. After two other messages come iup which are almost the same, the message: "Default Boot Device missing or startup failed. Insert the recovery media and press a button, then select "Boot Manager" to choose a new device Boot or Boot Recovery Media. "The two Previos are"1. Windows Boot Manager start failed. "and"failed to initialize the Windows Boot Manager. "I'm experienced in it so I know that something has gone wrong with the boot process, so nothing else running this error start freaking program other some other starnge treats that i have no knowledge of. the next screen that is displayed after the third popup says

  Menu Option to start 1. Manager start Windows ESC to exit

  Bluetooth doesn't seem to be running so im stuck with by clicking on windows boot manager which throws me through this lopp everywhere again. Ive plugged my tablet on my computer but it doent seem to be recognized as a disconnected device.ive it in fear of this charge as the race to the bottom of the stack seemed work very well on my mini ipad when it gopt stuck in a screen.i gel do not think the iconia will start correctly after he sinks since I don't have any medium of recovery and I have a deadline. that is tomorrow morning. knowing that the iconia has a max of 9 hours batterylife, I'm sure the battery rundown will work. Please advice cocoralie knowledge. If you are bored to my typos, please llok in my entry in the welcome forums.

  Hurtling down the battery seems to have solved the problem! Works great! No I don't think that there is a malicious, just stuff software in the code.

• Failed to start Windows 7, not found Boot Manager?

  I have a Sony Vaio VGN-SR26GN with Windows 7 32 bit installed.

  He froze, ctrl + alt + delete does not work I turned it works but it was not able to start windows, all I ended up with is a black screen with cursor mobile, even with safe mode.

  I tried recovery, known last good configuration, etc... but nothing has worked

  Then I started getting the blue screen of death with the BOOT MANAGER NOT FOUND or something of the sort

  I tried to use the CD to repair windows 7 but it couldn't detect any installation of windows or another partition... I tried the bootrec different commands but nothing worked

  Now when I turn on the computer, it will start the Vaio repair utility, open a blue screen and nothing happens for hours.

  I don't know if it is a hardware or software problem. What else can I try to do?

  Thank you

  Hello

  References to Vista also apply to Windows 7.

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  ---------------------------------------------------------

  This is the troubleshooting methods to try to resolve the problem:

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Fix the Vista Bootloader of Windows (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  ------------------------------------------------------------

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager (Windows 7)
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  problems starting in Windows Vista (Windows 7)
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information"(Windows 7)
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  =========================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Pavilion dv7 Notebook PC - Windows Boot Manager does not allow me to restart the laptop

  HP Pavilion dv7 Notebook PC
  XH121UA #ABA
  Office home and Student 2007

  I turned on my laptop and got the following message is displayed:
  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.

  I had no problem before now with the computer. Yet once, this message has occurred during a turn on my laptop. I tried to restart the laptop, but it is not allowing me to restart. The laptop back to this message.

  I appreciate any help with this issue. I thank very you much for your time and knowledge.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Windows Update failed - error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

  Original title: Windows Update Failed - need help

  Vista 32 Ultimate with all updates, until this one: update Windows failed: error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332). Update has failed repeatedly.  I tried to restart, remove the update (even by deleting the file so it would download it again) and install again.  Nothing has worked.  Error 80070643.  Since it is not Office 2003, the error seems to mean a problem with the Windows .NET framework.  Don't know what that means.

  Looking at KB976982, I tried to fix MSI software update registration corruption issues (whatever that means) by running the automated Fix It by KB971187. Restarted, I tried Windows Update again.  Still didn't update.

  Then, I waited two days and tried again.  Even that did not help.

  I tried bypassing Windows Update simply by downloading and then run the file SQLEXPR32.exe from Microsoft downloads. Did not work at all. I then tried to run it as an administrator (even if it was already an administrator account, with no other account on this computer at all).  He started to run and then gave me the following error message: unable to run the SQL Server System Configuration Checker due configulation WMI on the computer.  Error: 70347 (0x112cb).

  Now I'm really confused.  On the one hand, 80070643 means I probably repair the .NET framework, which certainly, I hate to do because I need several versions of the .NET framework first uninstall and then try to install the compmonents, and I'm afraid something would go wrong.

  On the other hand, the 70347 (0x112cb) error message seems to indicate the problem is completely different and has to do with WMI, which probably has to do with permissions and I have no idea how to solve this problem.  (And why it all of a sudden would be any problem with permissions?)  This computer is not on a corporate network and has only one user account, the administrative account).  I have looked at Services and Applications in computer management, where there are WMI control, but nothing shown that I can possibly change and not the SQL Server Configuration Manager under it, which doesn't seem to have much either.

  Help!  Please...

  And now I also tried to fix it, just in case where, the .NET framework (Panel > programs and features > Microsift.NET framework Client profile 4 > uninstall/change > fix it), and the Windows Update tried again (including reboot).  Still no.  Everything I try, it is not to do nothing, pardon my language.  People smarter than me, pleasehelp!

  Hi stupID_,

  «Error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332).» Update has failed repeatedly. »

  As the error relates to SQL, perhaps this forum:

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Satellite L650 - 10 H - inputs multiple Win 7 in the Boot Manager

  I have Toshiba Satellite L650 - 10H and I have recently reinstalled my Win 7 64 bit.
  There is no problem at all except that initially to laptop, I get this [http://tinypic.com/r/se7uja/6].

  3 Win 7 entries in the Boot Manager

  I always choose the first and all is well.
  It's like the old copy of win does not delete but one that I formatted disks...

  Y at - it an option to get rid of him?
  I don't mind reinstalling again if I know it will help.

  Hello

  I seems that Boot Manager Windows 7 contains three entries and the other two entries are useless.

  I think you can remove the last two entries in the Boot Manager.
  How to do this?
  Well, I m using the EasyBCD software.
  It is a free tool and you can easily manage this settings.

  After installation, start the tool.
  In EasyBCD toolbar, you can check the option called Add/Remove entries.
  Well, I think that here you should be able to remove the last two entries.

• "initialization failed. Windows Boot Manager"is displayed when starting, but no problem boot OS.

  The error 'failed to start. Windows Boot Manager"appears every time when the PC starts, but the operating system still works and everything seems to work very well.

  My system is installed with Windows Server 2008 Standard 32-bit with two 146 GB RAID 1 SAS hard drive and a hard drive of 300 GB in RAID 0.

  Hello Rieze,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2008 and would be better suited to the technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha